References
- Safeen MW, Spena PR. Main issues in quality of friction stir welding joints of aluminum alloy and steel sheets. Metals. 2019;5:22, doi:10.3390/met9050610.
- Wu F, Chen W, Zhao B, et al. Diffusion bonding of 1420 Al–Li alloy assisted by pure aluminum foil as interlayer. Materials. 2020;3:12, doi:10.3390/ma13051103.
- Zhang XL, He XC, Gu FS, et al. Self-piercing riveting of aluminium-lithium alloy sheet materials. J Mater Process Technol. 2019;268:192–200.
- Zhang XH, Gu C, Wu HL, et al. Experimental and numerical analysis on the strength of 2060 Al–Li alloy adhesively bonded T joints. Int J Adhes Adhes. 2016;65:79–87.
- Cisko AR, Jordon JB, Amaro RL, et al. A parametric investigation on friction stir welding of Al–Li 2099. Mater Manuf Process. 2020;35(10):1069–1076.
- Mucha J. The effect of material properties and joining process parameters on behavior of self-pierce riveting joints made with the solid rivet. Mater Des. 2013;52:932–946.
- Porcaro R, Hanssen AG, Langseth M, et al. Self-piercing riveting process: an experimental and numerical investigation. J Mater Process Technol. 2006;171(1):10–20.
- He XC, Pearson I, Young K. Self-piercing riveting for sheet materials: state of art. J Mater Process Technol. 2008;199(1–3):27–36.
- Liu JT, Zhao AN, Ke ZZ, et al. Investigation on the residual stresses and fatigue performance of riveted single strap butt joints. Materials. 2020;8:19, doi:10.3390/ma13153436.
- Mori K, Abe Y, Kato T. Self-piercing riveting of multiple steel and aluminium alloy sheets. J Mater Process Technol. 2014;214(10):2002–2008.
- Xie ZQ, Yan WM, Yu C, et al. Experimental investigation of cold-formed steel shear walls with self-piercing riveted connections. Thin Walled Struct. 2018;131:1–15.
- Mucha J. A study of quality parameters and behaviour of self-piercing riveted aluminium sheets with different joining conditions. Stroj Vestn J Mech Eng. 2011;57(4):323–333.
- Li D, Han L, Shergold M, et al. Influence of rivet tip geometry on the joint quality and mechanical strengths of self-piercing riveted aluminium joints. Mater Sci Forum. 2013;765:746–750.
- Haque R, Williams NS, Blacket SE, et al. A simple but effective model for characterizing SPR joints in steel sheet. J Mater Process Technol. 2015;223:225–231.
- Liu Y, Zhuang WM. Self-piercing riveted-bonded hybrid joining of carbon fibre reinforced polymers and aluminium alloy sheets. Thin Walled Struct. 2019;11:11, doi:10.1016/j.tws.2019.106340.
- Di Franco G, Fratini L, Pasta A. Influence of the distance between rivets in self-piercing riveting bonded joints made of carbon fibre panels and AA2024 blanks. Mater Des. 2012;35:342–349.
- Haque R. Quality of self-piercing riveting (SPR) joints from cross-sectional perspective: a review. Arch Civ Mech Eng. 2018;18(1):83–93.
- General Administration of Quality Supervision. Inspection and Quarantine of P.R. China, Standardization Administration of P.R. China. Tensile test method on welded joints, GB/T 2651-2008, Beijing, PRC, 2008.
- Haque R, Durandet Y. Strength prediction of self-pierce riveted joint in cross-tension and lap-shear. Mater Des. 2016;108:666–678.
- Xing BY, He XC, Zeng K, et al. Mechanical properties of self-piercing riveted joints in aluminum alloy 5052. Int J Adv Manuf Technol. 2014;75(1–4):351–361.
- Li D, Han L, Thornton M, et al. Influence of edge distance on quality and static behaviour of self-piercing riveted aluminium joints. Mater Des. 2012;34:22–31.
- Huang L, Guo HD, Shi YD, et al. Fatigue behavior and modeling of self-piercing riveted joints in aluminum alloy 6111. Int J Fatigue. 2017;100:274–272.