References
- Kawahito Y, Mizutani M, Katayama S. High quality welding of stainless steel with 10 kW high power fibre laser. Sci Technol Weld Joining. 2009;14(4):288–294.
- Seto N, Katayama S, Matsunawa A. Porosity formation mechanism and reduction method in CO2 laser welding of stainless steel. Weld Int. 2002;16(6):451–460.
- Matsunawa A, Mizutani M, Katayama S, et al. Porosity formation mechanism and its prevention in laser welding. Weld Int. 2003;17(6):431–437.
- Wang Z, Oliveira J, Zeng Z, et al. Laser beam oscillating welding of 5A06 aluminum alloys: microstructure, porosity and mechanical properties. Opt Laser Technol. 2019;111:58–65.
- Liu T, Mu Z, Hu R, et al. Sinusoidal oscillating laser welding of 7075 aluminum alloy: hydrodynamics, porosity formation and optimization. Int J Heat Mass Transf. 2019;140:346–358.
- Chen G, Wang B, Mao S, et al. Research on the “∞”-shaped laser scanning welding process for aluminum alloy. Opt Laser Technol. 2019;115:32–41.
- Wang L, Gao M, Zhang C, et al. Effect of beam oscillating pattern on weld characterization of laser welding of AA6061-T6 aluminum alloy. Mater Des. 2016;108:707–717.
- Zhou L, Wang W, Wang X, et al. Effects of laser scanning welding process on porosity rate of aluminum alloy. Trans China Weld Inst. 2014;35(10):65–68 and 72.
- Fetzer F, Sommer M, Weber R, et al. Reduction of pores by means of laser beam oscillation during remote welding of AlMgSi. Opt Lasers Eng. 2018;108:68–77.
- Lin R, Wang H-p, Lu F, et al. Numerical study of keyhole dynamics and keyhole-induced porosity formation in remote laser welding of Al alloys. Int J Heat Mass Transf. 2017;108:244–256.
- Cho J-H, Farson DF, Milewski JO, et al. Weld pool flows during initial stages of keyhole formation in laser welding. J Phys D: Appl Phys. 2009;42(17):175502.
- Cho J, Farson DF, Hollis KJ, et al. Numerical analysis of weld pool oscillation in laser welding. J Mech Sci Technol. 2015;29(4):1715–1722.
- Pang S, Hirano K, Fabbro R, et al. Explanation of penetration depth variation during laser welding under variable ambient pressure. J Laser Appl. 2015;27(2):022007.
- Gao XS, Wu CS, Goecke S-F, et al. Numerical simulation of temperature field, fluid flow and weld bead formation in oscillating single mode laser-GMA hybrid welding. J Mater Process Technol. 2017;242:147–159.
- Wang H, Shi Y, Gong S. Numerical simulation of laser keyhole welding processes based on control volume methods. J Phys D: Appl Phys. 2006;39(21):4722–4730.
- Lee JY, Ko SH, Farson DF, et al. Mechanism of keyhole formation and stability in stationary laser welding. J Phys D: Appl Phys. 2002;35(13):1570–1576.
- Zhou J, Tsai HL, Lehnhoff TF. Investigation of transport phenomena and defect formation in pulsed laser keyhole welding of zinc-coated steels. J Phys D: Appl Phys. 2006;39(24):5338–5355.
- Li X, Lu F, Cui H, et al. Numerical modeling on the formation process of keyhole-induced porosity for laser welding steel with T-joint. Int J Adv Manuf Technol. 2014;72(1):241–254.
- Mu Z, Chen X, Zheng Z, et al. Laser cooling arc plasma effect in laser-arc hybrid welding of 316L stainless steel. Int J Heat Mass Transf. 2019;132:861–870.
- Hao K, Li G, Gao M, et al. Weld formation mechanism of fiber laser oscillating welding of austenitic stainless steel. J Mater Process Technol. 2015;225:77–83.
- Wang L, Liu Y, Yang C, et al. Study of porosity suppression in oscillating laser-MIG hybrid welding of AA6082 aluminum alloy. J Mater Process Technol. 2021;292:117053.