Improvement of microstructure and mechanical properties of AZ61 Mg alloys subjected to rapid cooling friction stir welding

References

• Meng XC, Huang YX, Cao J, et al. Recent progress on control strategies for inherent issues in friction stir welding. Prog Mater Sci. 2021;115:100706.
   Web of Science ®Google Scholar
• Xu N, Bao YF, Shen J. Enhanced strength and ductility of high pressure die casting AZ91D Mg alloy by using cold source assistant friction stir processing. Mater Lett. 2017;190:24–27.
   Web of Science ®Google Scholar
• Wang W, Han P, Peng P, et al. Friction stir processing of magnesium alloys: a review. Acta Metall Sin (Engl Lett). 2020;33:43–57.
   Web of Science ®Google Scholar
• Park SHC, Sato YS, Kokawa H. Basal plane texture and flow pattern in friction stir weld of a magnesium alloy. Metall Mater Trans A. 2003;34A:987–994.
   Web of Science ®Google Scholar
• Park SHC, Sato YS, Kokawa H. Effect of micro–texture on fracture location in friction stir weld of Mg alloy AZ61 during tensile test. Scr Mater. 2003;49:161–166.
   Web of Science ®Google Scholar
• Hou DW, Zhu YZ, Li QZ, et al. Effect of {10-12} twinning on the deformation behavior of AZ31 magnesium alloy. Mater Sci Eng A. 2019;746:314–321.
   Web of Science ®Google Scholar
• Xin YC, Wang MY, Zeng Z, et al. Strengthening and toughening of magnesium alloy by {10−12} extension twins. Scr Mater. 2012;66:25–28.
   Web of Science ®Google Scholar
• Lee CJ, Huang JC, Du XH. Improvement of yield stress of friction-stirred Mg–Al–Zn alloys by subsequent compression. Scr Mater. 2007;56:875–878.
   Web of Science ®Google Scholar
• Xin RL, Liu DJ, Xu ZR, et al. Changes in texture and microstructure of friction stir welded Mg alloy during post-rolling and their effects on mechanical properties. Mater Sci Eng A. 2013;582:178–187.
   Web of Science ®Google Scholar
• Xin RL, Sun LY, Liu DJ, et al. Effect of subsequent tension and annealing on microstructure evolution and strength enhancement of friction stir welded Mg alloys. Mater Sci Eng A. 2014;602:1–10.
   Web of Science ®Google Scholar
• Benavides S, Li Y, Murr LE, et al. Low–temperature friction stir welding of 2024 aluminum. Scr Mater. 1999;41:809–815.
   Web of Science ®Google Scholar
• Fujii H, Chung YD, Sun YF. Friction stir welding of AISI 1080 steel using liquid CO2 for enhanced toughness and ductility. Sci Tech Weld Joi. 2013;18:500–506.
   Web of Science ®Google Scholar
• Liu XC, Sun YF, Fujii H. Clarification of microstructure evolution of aluminum during friction stir welding using liquid CO2 rapid cooling. Mater Des. 2017;129:151–163.
   Web of Science ®Google Scholar
• Chai F, Zhang DT, Li YY, et al. High strain rate superplasticity of a fine-grained AZ91 magnesium alloy prepared by submerged friction stir processing. Mater Sci Eng A. 2013;568:40–48.
   Web of Science ®Google Scholar
• Chai F, Zhang DT, Li YY, et al. Microstructure evolution and mechanical properties of a submerged friction-stir-processed AZ91 magnesium alloy. J Mater Sci. 2015;50:3212–3225.
   Web of Science ®Google Scholar
• Xu N, Song QN, Bao YF, et al. Investigation on microstructure and mechanical properties of cold source assistant friction stir processed AZ31B magnesium alloy. Mater Sci Eng A. 2019;761:138027.
   Web of Science ®Google Scholar
• Li X, Jiao F, Al-Sammana T, et al. Influence of second-phase precipitates on the texture evolution of Mg–Al–Zn alloys during hot deformation. Scr Mater. 2012;66:159–162.
   Web of Science ®Google Scholar
• Xu N, Ueji R, Morisada Y, et al. Modification of mechanical properties of friction stir welded Cu joint by additional liquid CO2 cooling. Mater Des. 2014;56:20–25.
   Web of Science ®Google Scholar
• Feng AH, Ma ZY. Enhanced mechanical properties of Mg–Al–Zn cast alloy via friction stir processing. Scr Mater. 2007;56:397–400.
   Web of Science ®Google Scholar
• Mironov S, Onuma T, Sato YS, et al. Microstructure evolution during friction-stir welding of AZ31 magnesium alloy. Acta Mater. 2015;100:301–312.
   Web of Science ®Google Scholar
• Xu N, Song QN, Bao YF. {10–12} twinning assisted microstructure and mechanical properties modification of high-force friction stir processed AZ31B Mg alloy. Mater Sci Eng A. 2019;745:400–403.
   Web of Science ®Google Scholar
• Xu N, Feng RN, Zhao JH, et al. Influence of heterogeneous microstructures on the mechanical properties of low-temperature friction stir processed AZ91D Mg alloy. Mater Sci Eng A. 2021;809:141004.
   Web of Science ®Google Scholar
• Wang BS, Shi JJ, Ye P, et al. In-situ investigation on nucleation and propagation of {10-12} twins during uniaxial multi-pass compression in an extruded AZ31 Mg alloy. Mater Sci Eng A. 2018;731:71–79.
   Web of Science ®Google Scholar
• Park SH, Hong SG, Lee CS. Activation mode dependent {10-12} twinning characteristics in a polycrystalline magnesium alloy. Scr Mater. 2010;62:202–205.
   Web of Science ®Google Scholar
• Khosravani A, Fullwood DT, Adams BL, et al. Nucleation and propagation of twins in AZ31 magnesium alloy. Acta Mater. 2015;100:202–214.
   Web of Science ®Google Scholar
• Yu Q, Wang J, Jiang Y, et al. Twin-twin interactions in magnesium. Acta Mater. 2014;77:28–42.
   Web of Science ®Google Scholar
• Chen XH, Lu L. Work hardening of ultrafine-grained copper with nanoscale twins. Scr Mater. 2007;57:133–136.
   Web of Science ®Google Scholar
• Chen J, Fujii H, Sun YF, et al. Fine grained Mg–3Al–1Zn alloy with randomized texture in the double-sided friction stir welded joints. Mater Sci Eng A. 2013;580:83–91.
   Web of Science ®Google Scholar
• Kadiri H E, Kapil J, Oppedal AL, et al. The effect of twin-twin interactions on the nucleation and propagation of twinning in magnesium. Acta Mater. 2013;61:3549–3563.
   Web of Science ®Google Scholar
• Zhao F, Suo T, Chen B, et al. Strength-ductility combination of fine-grained magnesium alloy with high deformation twin density. J Alloys Compd. 2019;798:350–359.
   Web of Science ®Google Scholar
• Zhang Y, Dong ZS, Wang JT, et al. An analytical approach and experimental confirmation of dislocation–twin boundary interactions in titanium. J Mater Sci. 2013;48:4476–4483.
   Web of Science ®Google Scholar