Improvement of inhomogeneity of microstructure and mechanical properties for 316 stainless steel laser-MIG hybrid welded joint assisted by alternating magnetic field

References

• El H-AK, Khouja ML, Boussaid M, et al. Effects of welding parameters on weld pool characteristics and shape in hybrid laser-TIG welding of AA6082 aluminum alloy: numerical and experimental studies. Weld World. 2016;60(1):137–151.
   Web of Science ®Google Scholar
• Gao M, Zeng X, Yan J, et al. Microstructure characteristics of laser–MIG hybrid welded mild steel. Appl Surf Sci. 2008;254(18):5715–5721.
   Web of Science ®Google Scholar
• Liu S, Hu J, Shi Y. Microstructure of laser-MAG hybrid welds of sintered P/M steel. J Mater Eng Perform. 2013;22(1):251–257.
   Web of Science ®Google Scholar
• Chen Y, Feng J, Liqun LI, et al. Microstructure and mechanical properties of a thick-section high-strength steel welded joint by novel double-sided hybrid fibre laser-arc welding. Mater Sci Eng, A. 2013;582(2):284–293.
   Google Scholar
• Wang J, Sun Q, Feng J, et al. Characteristics of welding and arc pressure in TIG narrow gap welding using novel magnetic arc oscillation. Int J Adv Manuf Syst Techno. 2017;90(1–4):413–420.
   Web of Science ®Google Scholar
• Yuan T, Luo Z, Kou S. Grain refining of magnesium welds by arc oscillation. Acta Mater. 2016;116:166–176.
   Web of Science ®Google Scholar
• Li Y, Wu CS, Wang L, et al. Analysis of additional electromagnetic force for mitigating the humping bead in high-speed gas metal arc welding. J Mater Process Technol. 2016;229:207–215.
   Web of Science ®Google Scholar
• Kou S, Le Y. Grain structure and solidification cracking in oscillated arc welds of 5052 aluminum alloy. Metall Trans A. 1985;16(7):1345–1352.
   Web of Science ®Google Scholar
• Avilov VV, Gumenyuk A, Lammers M, et al. PA position full penetration high power laser beam welding of up to 30 mm thick AlMg3 plates using electromagnetic weld pool support. Sci Technol Weld Join. 2012;17(2):128–133.
   Web of Science ®Google Scholar
• Chen R, Wang C, Jiang P, et al. Effect of axial magnetic field in the laser beam welding of stainless steel to aluminum alloy. Mater Des. 2016;109:146–152.
   Web of Science ®Google Scholar
• Bachmann M, Avilov V, Gumenyuk A, et al. About the influence of a steady magnetic field on weld pool dynamics in partial penetration high power laser beam welding of thick aluminium parts. Int J Heat Mass Transfer. 2013;60:309–321.
   Web of Science ®Google Scholar
• Zhou J, Tsai H-L. Effects of electromagnetic force on melt flow and porosity prevention in pulsed laser keyhole welding. Int J Heat Mass Transfer. 2007;50(11-12):2217–2235.
   Web of Science ®Google Scholar
• Chen R, Jiang P, Shao X, et al. Improvement of low-temperature impact toughness for 304 weld joint produced by laser-MIG hybrid welding under magnetic field. J Mater Process Technol. 2017;247:306–314.
   Web of Science ®Google Scholar
• Chen R, Jiang P, Shao X, et al. Effect of magnetic field applied during laser-arc hybrid welding in improving the pitting resistance of the welded zone in austenitic stainless steel. Corros Sci. 2017;126:385–391.
   Web of Science ®Google Scholar
• Chen R, Jiang P, Shao X, et al. Effect of magnetic field on crystallographic orientation for stainless steel 316L laser-MIG hybrid welds and its strengthening mechanism on fatigue resistance. Int J Fatigue. 2018;112:S0142112318301269.
   Web of Science ®Google Scholar
• Chen R, Jiang P, Shao X, et al Effect of static magnetic field on microstructures and mechanical properties of laser-MIG hybrid welding for 304 stainless steel. Int J Adv Manuf Syst Techno. 2017;91(9-12):3437–3447.
   Web of Science ®Google Scholar
• Hao K, Gong M, Pi Y, et al. Effect of Ni content on rolling toughness of laser-arc hybrid welded martensitic stainless steel. J Mater Process Technol. 2017;251:S0924013617303874.
   Web of Science ®Google Scholar
• Liu F, Xu B, Song K, et al. Improvement of penetration ability of heat source for 316 stainless steel welds produced by alternating magnetic field assisted laser-MIG hybrid welding. J Mater Process Technol. 2022;299:117329.
   Web of Science ®Google Scholar
• Umeda T, Okane T. Solidification microstructures selection of Fe-Cr-Ni and Fe-Ni alloys. Sci Technol Adv Mater. 2001;2(1):231–240.
   Web of Science ®Google Scholar
• Kim YH, Kim DG, Sung JH, et al. Influences of Cr/Ni equivalent ratios of filler wires on pitting corrosion and ductility-dip cracking of AISI 316L weld metals. Met Mater Int. 2011;17(1):151–155.
   Web of Science ®Google Scholar
• Kou S, Le Y. 1982. The effect of quenching on the solidification structure and transformation behavior of stainless steel welds. Metall Trans A; 13(7):1141–1152.
   Web of Science ®Google Scholar
• Bunaziv I, Akselsen OM, Frostevarg J, et al. Laser-arc hybrid welding of thick HSLA steel. J Mater Process Technol. 2018;259:75–87.
   Web of Science ®Google Scholar
• Soysal T. 2021. Effect of solidification models on predicting susceptibility of carbon steels to solidification cracking. Welding World; 65:1943–1954.
   Web of Science ®Google Scholar
• Chen HM, and Chou PC. Effect of thermal cycles on ferrite content of austenitic stainless steel. Sci Technol Weld Joining. 1999;4(1):58–62.
   Web of Science ®Google Scholar
• Koyama M, Yamasaki D, Nagashima T, et al. In situ observations of silver-decoration evolution under hydrogen permeation: effects of grain boundary misorientation on hydrogen flux in pure iron. Scr Mater. 2017;129(Complete):48–51.
   Google Scholar
• Abtibol J, Menezes W, Abreu H, et al. Crystallography of Widmanstätten austenite in duplex stainless steel weld metal. Sci Technol Weld Joining. 2013;14(1):4–10.
   Google Scholar
• Hilders OA, Santana MG. Toughness and fractography of austenitic type 304 stainless steel with sensitization treatments at 973 K. Metallography. 1988;21:151–164.
   Google Scholar
• Wang P, Lu SP, Xiao NM, et al. Effect of delta ferrite on impact properties of low carbon 13Cr–4Ni martensitic stainless steel. Mater Sci Eng A. 2010;527(13):3210–3216.
   Web of Science ®Google Scholar
• Carrouge D, Bhadeshia HKDH, Woollin P. Effect of δ-ferrite on impact properties of supermartensitic stainless steel heat affected zones. Sci Technol Weld Join. 2004;9(5):377–389.
   Web of Science ®Google Scholar
• Fattahi M, Nabhani N, Vaezi MR, et al. Improvement of impact toughness of AWS E6010 weld metal by adding TiO2 nanoparticles to the electrode coating. Mater Sci Eng A. 2011;528(27):8031–8039.
   Web of Science ®Google Scholar
• Calcagnotto M, Ponge D, Raabe D. Effect of grain refinement to 1µm on strength and toughness of dual-phase steels. Mater Sci Eng A. 2010;527(29):7832–7840.
   Web of Science ®Google Scholar