A Procedure for the Displacement-Based Seismic Assessment of Infilled RC Frames

References

• Al-Chaar, G. [2002 ] “Evaluating strength and stiffness of unreinforced masonry infill structures,” US Army Corps of Engineers, Engineer Research and Development Center.
   Google Scholar
• Amato, G., Cavaleri, L., Fossetti, M., and Papia, M. [2008 ] “Infilled frames: influence of vertical load on the equivalent diagonal strut model,” Proc. of the 14th World Conference on Earthquake Engineering, Beijing, China.
   Google Scholar
• Asteris, P. G. [2003 ] “Lateral stiffness of brick masonry infilled plane frames,” Journal of Structural Engineering 129(8), 1071–1079.
   Web of Science ®Google Scholar
• Benedetti, A., Landi, L., and Malavolta, D. [2008 ] “On the design and evaluation of seismic response of RC buildings according to direct displacement-based design approach,” Proc. of the 14th World Conference on Earthquake Engineering, Beijing, China.
   Google Scholar
• Benedetti, A., Landi, L., and Merenda, D. G. [2014 ] “Displacement-based design of an energy dissipating system for seismic upgrading of existing masonry structures,” Journal of Earthquake Engineering 18(4), 477–501.
   Web of Science ®Google Scholar
• Bertoldi, S. H., Decanini, L. D., and Gavarini, C. [1993 ] “Telai tamponati soggetti ad azioni sismiche. Un modello semplificato. Confronto sperimentale e numerico,” Proc. of the 6th National Conference ANIDIS, Perugia, Italy.
   Google Scholar
• Calvi, G. M. and Bolognini, D. [2001 ] “Seismic response of reinforced concrete frames infilled with weakly reinforced masonry panels,” Journal of Earthquake Engineering 5(2), 153–185.
   Web of Science ®Google Scholar
• Cavaleri, L., Fossetti, M., and Papia, M. [2005 ] “Infilled frames: developments in the evaluation of cyclic behaviour under lateral loads,” Structural Engineering and Mechanics 21, 469–494.
   Web of Science ®Google Scholar
• CEN [2003 ] Eurocode 8. Design of Structures for Earthquake Resistance – Part 1: General Rules, Seismic Actions and Rules for Buildings, Brussels, Belgium.
   Google Scholar
• Colangelo, F. [2004 ] “Pseudo-dynamic seismic response of infilled RC frames designed for gravity loading,” Proc. of the 13th World Conference on Earthquake Engineering, Vancouver, Canada.
   Google Scholar
• Comité Euro-International Du Béton [1996 ] RC frame under earthquake loading: State of the Art Report, Thomas Telford Publishing, London.
   Google Scholar
• Crisafulli, F. J. and Carr, A. J. [2007 ] “Proposed macro-model for the analysis of infilled frame structures,” Bulletin of the New Zealand Society of Earthquake Engineering 40(2), 69–77.
   Google Scholar
• De Sortis, A., Bazzurro, P., Mollaioli, F., and Bruno, S. [2007 ] “Influenza delle tamponature sul rischio sismico degli edifici in calcestruzzo armato,” Proc. of the 12th National Conference ANIDIS, Pisa, Italy.
   Google Scholar
• Decanini, L., Mollaioli, F., Mura, A., and Saragoni, R. [2004 ] “Seismic performance of masonry infilled R/C frames,” Proc. of the 13th World Conference on Earthquake Engineering, Vancouver, Canada.
   Google Scholar
• Diotallevi, P. P. and Landi, L. [2006 ] “Response of RC structures subjected to horizontal and vertical ground motions,” Proceedings of the 8^th U.S. National Conference on Earthquake Engineering, San Francisco, California, 4113–4122.
   Google Scholar
• Dolsek, M. and Fajfar, P. [2008 ] “The effect of masonry infills on the seismic response of a four-story reinforced concrete frame - A deterministic assessment,” Engineering Structures 30, 1991–2001.
   Web of Science ®Google Scholar
• Dwairi, H. M., Kowalsky, M. J., and Nau, J. M. [2007 ] “Equivalent damping in support of direct displacement-based design,” Journal of Earthquake Engineering 11(4), 512–530.
   Web of Science ®Google Scholar
• El-Dakhakhni, W. W., Elgaad, M., and Hamid, A. A. [2003 ] “Three-strut model for concrete masonry-infilled steel frames,” Journal of Structural Engineering 129(2), 177–185.
   Web of Science ®Google Scholar
• Fardis, M. N. and Panagiotakos, T. B. [1997 ] “Seismic design and response of bare and masonry-infilled reinforced concrete buildings. Part II: infilled structures,” Journal of Earthquake Engineering 1(3), 475–503.
   Web of Science ®Google Scholar
• Glaister, S. and Pinho, R. [2003 ] “Development of a simplified deformation-based method for seismic vulnerability assessment,” Journal of Earthquake Engineering, 7(S1), 107–140.
   Web of Science ®Google Scholar
• Hak, S., Morandi, P., Magenes, G., and Sullivan, T. J. [2012 ] “Damage control for clay masonry infills in the design of RC frame structures,” Journal of Earthquake Engineering 16(S1), 1–35.
   Web of Science ®Google Scholar
• Iwan, W. D. and Gates, N. C. [1979 ] “The effective period and damping of a class of hysteretic structures,” Earthquake Engineering and Structural Dynamics 7, 199–211.
   Web of Science ®Google Scholar
• Judi, H. J., Fenwick, R. C., and Davidson, B. J. [2001 ] “Direct displacement based design-a definition of damping,” Proc. of the 2001 NZSEE Technical Conference. Auckland, New Zealand.
   Google Scholar
• Klingner, R. E. and Bertero, V. V. [1978 ] “Earthquake resistance of infilled frames,” Journal of the Structural Division 104, 973–989.
   Web of Science ®Google Scholar
• Korkmaz, K. A., Demir, F., and Sivri, M. [2007 ] “Earthquake assessment of R/C structures with masonry infill walls,” International Journal of Science and Technology 2(2), 155–164.
   Google Scholar
• Kowalsky, M. J. and Priestley, M. J. N. [2000 ] “An improved analytical model for shear strength of circular RC columns in seismic regions,” ACI Journal 97(3), 388–396.
   Google Scholar
• Landi, L., Lucchi, S., and Diotallevi, P. P. [2014a ] “A procedure for the direct determination of the required supplemental damping for the seismic retrofit with viscous dampers,” Engineering Structures 71, 137–149.
   Web of Science ®Google Scholar
• Landi, L., Pollio, B., and Diotallevi, P. P. [2014b ] “Effectiveness of different standard and advanced pushover procedures for regular and irregular RC frames,” Structural Engineering and Mechanics 51(3), 433–446.
   Web of Science ®Google Scholar
• Landi, L., Tardini, A., and Diotallevi, P. P. [2012 ] “Equivalent viscous damping for the displacement-based seismic assessment of infilled RC frames,” Proc. of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal.
   Google Scholar
• Landi, L., Diotallevi, P. P., and Tardini, A. [2013 ] “Nonlinear seismic analysis of infilled RC frames with an equivalent strut model,” Proc. of the ECCOMAS Thematic Conference - COMPDYN 2013: 4th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Kos Island, Greece, June 12–14, 3975–3988.
   Google Scholar
• Mainstone, R. J. [1971 ] “On the stiffness and strength of infilled frames,” Proc. of the Institution of Civil Engineers, London, Supplement IV, Paper 7360S, pp. 57–90.
   Google Scholar
• Mander, J. B., Priestley, M. J. N., and Park, R. [1988 ] “Theoretical stress-strain model for confined concrete,” Journal of Structural Engineering 114(8), 1804–1826.
   Web of Science ®Google Scholar
• McKenna, F. and Fenves, G. [2005 ] Open System for Earthquake Engineering Simulation, University of California, Berkley, California.
   Google Scholar
• Morandi, P., Hak S., and Magenes, G. [2014 ] “In-plane experimental response of strong masonry infills”, Proc. of the 9th International Masonry Conference, Guimarães, Portugal, July 7–9.
   Google Scholar
• Negro, P., Anthoine, A., Combescure, D., Magonette, G., Molina, J., Pegon, P., and Verzeletti, G. [1995 ] “Tests on four-story full-scale reinforced concrete frame with masonry infills: preliminary report,” Special publication No. I.95.54, European Commission, Joint Research Centre, Ispra, Italy.
   Google Scholar
• Negro, P. and Colombo, A. [1997 ] “Irregularities induced by non-structural masonry panels in framed buildings,” Engineering Structures 19(7), 576–585.
   Web of Science ®Google Scholar
• Papia, M., Cavaleri, L., and Fossetti, M., [2003 ] “Infilled frames: developments in the evaluation of the stiffening effect of infills,” Structural Engineering and Mechanics 16, 675–693.
   Web of Science ®Google Scholar
• Pennucci, D., Sullivan, T. J., and Calvi, G. M. [2011 ] “Displacement reduction factors for the design of medium and long period structures,” Journal of Earthquake Engineering 15(S1), 1–29.
   Web of Science ®Google Scholar
• Pinto, A., Verzelletti, G., Molina, F. J., Varum, H., Carvalho, E. C., and Coelho, E. [1999 ] “Pseudo-dynamic tests on non-seismic resisting RC frames (infilled frame and infill strengthened frame tests),” EU Special Publication, Joint Research Centre, Ispra, Italy.
   Google Scholar
• Pires, F. M. G. [1990 ] “Influencia das paredes de alvenaria no comportamento de estruturas reticuladas de betao armado sujeitas a accoes horizontais,” Specialist Thesis, LNEC, Lisbon, Portugal.
   Google Scholar
• Priestley, M. J. N. [1997 ] “Displacement-based seismic assessment of reinforced concrete buildings,” Journal of Earthquake Engineering 1(1), 157–192.
   Web of Science ®Google Scholar
• Priestley, M. J. N. and Calvi, G. M. [1991 ] “Towards a capacity-design assessment procedure for reinforced concrete frames,” Earthquake Spectra 7(3), 413–437.
   Google Scholar
• Priestley, M. J. N., Calvi, G. M., and Kowalsky, M. J. [2007 ] Displacement-Based Seismic Design of Structures, IUSS Press, Pavia, Italy.
   Google Scholar
• Priestley, M. J. N., Seible, F., and Calvi, G. M. [1996 ] Seismic Design and Retrofit of Bridges, Wiley, New York.
   Google Scholar
• Smyrou, E., Blandon, C., Antoniou, S., Pinho, R., and Crisafulli, F. [2011 ] “Implementation and verification of a masonry panel model for nonlinear dynamic analysis of infilled RC frames,” Bulletin of Earthquake Engineering 9(5), 1519–1534.
   Web of Science ®Google Scholar
• Stafford-Smith, B. [1966 ] “Behaviour of square infilled frames,” Journal of the Structural Division ASCE, 92(1), 381–404.
   Google Scholar
• Sullivan, T. J. and Calvi, G. M. [2011 ] “Considerations for the seismic assessment of buildings using the direct displacement-based assessment approach,” Proc. of the 14th National Conference ANIDIS, Bari, Italy.
   Google Scholar
• Sullivan, T. J., Welch, D. P., and Calvi, G. M. [2014 ] “Simplified seismic performance assessment and implications for seismic design,” Earthquake Engineering and Engineering Vibration 13, 95–122.
   Web of Science ®Google Scholar
• Welch, D. P., Sullivan, T. J., and Calvi, G. M. [2014 ] “Developing direct displacement-based procedures for simplified loss assessment in performance-based earthquake engineering,” Journal of Earthquake Engineering 18(2), 290–322.
   Web of Science ®Google Scholar