182
Views
2
CrossRef citations to date
0
Altmetric
Original Articles

Influence of Substructure Levels on the Computed Seismic Performance of Low-Rise Structures

&
Pages 992-1008 | Received 25 Sep 2017, Accepted 21 Dec 2018, Published online: 25 Jan 2019

References

  • Arulmoli, K., Muraleetharan, K. K., Hossain, M. M. and Fruth, L. S. [1992] “VELACS: verification of liquefaction analyses by centrifuge studies, Laboratory Testing Program,” Soil Data Rep. Project No. 90-0562, The Earth Technology Corporation, Irvine, CA.
  • Beaty, M. H. and Byrne, P. [1998] “An effective stress for predicting liquefaction behaviour of sand,” Geotechnical Earthquake Eng. and Soil Dynamics III, Geotechnical Sp. Pub. 1, pp. 766–777.
  • Beaty, M. H. and Byrne, P. M. [2011] “UBCSAND Constitutive Model, Version 904aR,” Itasca UDM Web Site. Retrieved from www.itasca-udm.com/download/UBCSand/UBCSAND_UDM_Documentation.pdf
  • Boulanger, R. W. and Idriss, I. M. [2014] CPT and SPT Based Liquefaction Triggering Procedures, Center for Geotechnical Modeling, UC Davis, Davis, CA. Retrieved from http://nees.ucdavis.edu/publications/Boulanger_Idriss_CPT_and_SPT_Liq_triggering_CGM-14-01_2014.pdf
  • Byrne, P. M., Park, -S.-S., Beaty, M., Sharp, M., Gonzalez, L. and Abdoun, T. [2004] “Numerical modeling of liquefaction and comparison with centrifuge tests,” Canadian Geotechnical Journal 41(2), 193–211. doi:10.1139/t03-088.
  • Çağlar, N., Sert, S., Imbabi, M. S. and Serdar, A. H. [2015] “The effect of a basement storey on the earthquake response of RC buildings constructed on soft surface soil,” ISITES2015. Valencia, Spain, pp. 1–7.
  • Dashti, S. [2009] “Toward developing an engineering procedure for evaluating building performance on softened ground,” Ph.D Dissertation, University of California, Berkeley.
  • Dashti, S. and Bray, J. D. [2013] “Numerical simulation of building response on liquefiable sand,” Journal of Geotechnical and Geoenvironmental Engineering 139(8), 1235–1249. doi:10.1061/(ASCE)GT.1943-5606.0000853.
  • Earth Mechanics Inc. [2006] “Port-wide ground motion study port of long beach, California,” EMI Project No. 01-143 (01).
  • Galavi, V., Petalas, A. and Brinkgreve, R. B. J. [2013] “Finite element modelling of seismic liquefaction in soils,” Geotechnical Engineering 44(3), 55–64.
  • Geotechnical Professionals Inc. [2003] Geotechnical Studies for Pier S Wharf Port of Long Beach, Long Beach, CA. Project No. 1790.I.
  • Hausler, E. A. [2002] “Influence of ground improvement on settlement and liquefaction: A study based on field case history evidence and dynamic geotechnical centrifuge tests,” Ph.D. Dissertation, University of California, Berkeley.
  • Idriss, I. M. and Boulanger, R. W. [2004] “Semi-empirical procedures for evaluating liquefaction potential during earthquakes,” Proc. of the 11th ICSDEE & 3rd ICEGE 32–56. Berkeley, CA.
  • Kramer, S. L. [1996] Geotechnical Earthquake Engineering, Prentice-Hall, Upper Saddle River, NJ.
  • Kuhlemeyer, R. and Lysmer, J. [1973] “Finite element method accuracy for wave propagation problems,” Journal of Soil Mechanics and Foundation 99(5), 421–427.
  • Liu, L. and Dobry, R. [1997] “Seismic response of shallow foundation on liquefiable sand,” Journal of Geotechnical and Geoenvironmental Engineering 123(6), 557–567. doi:10.1061/(ASCE)1090-0241(1997)123:6(557).
  • Lu, J., Elgamal, A., Yan, L., Law, K. H. and Conte, J. P. [2011] “Large-scale numerical modeling in geotechnical earthquake engineering,” International Journal of Geomechanics 11(6), 490–503. doi:10.1061/(ASCE)GM.1943-5622.0000042.
  • Makra, A. [2013] Evaluation of the UBC3D-PLM Constitutive Model for Prediction of Earthquake Induced Liquefaction on Embankment Dams, Delft University of Technology, Nederlands.
  • Petalas, A. and Galavi, V. [2013] Plaxis Liquefaction Model UBC3D-PLM, Plaxis B.V, Delft, The Netherlands. Retrieved from http://kb.plaxis.com/sites/kb.plaxis.nl/files/kb-downloads/UBC3D-PLM(REPORT).May2012.pdf%5Cnpapers3://publication/uuid/4C262C62-D18F-413F-8EFD-B0446FDAB3DE
  • Plaxis. [2015] Site Response Analysis and Liquefaction Evaluation. Nederlands
  • Puebla, H., Byrne, P. M. and Phillips, R. [1997] “Analysis of CANLEX liquefaction embankments: prototype and centrifuge models,” Canadian Geotechnical Journal 34(5), 641–657. doi:10.1139/t97-034.
  • Rodriguez, M. E., Restrepo, J. I. and Carr, A. J. [2002] “Earthquake-induced floor horizontal accelerations in buildings,” Earthquake Engineering & Structural Dynamics 31(3), 693–718. doi:10.1002/eqe.149.
  • Schanz, T., Vermeer, A. and Bonnier, P. [1999] “The hardening soil model: formulation and verification,” Beyond 2000 Comput. Geotech. 10 years PLAXIS Int. Proc, Amsterdam, Netherlands, p. 281. Retrieved from http://books.google.com/books?hl=en&lr=&id=ylNlhdPdB6cC&oi=fnd&pg=PA281&dq=The+hardening+soil+model+:+Formulation+and+verification&ots=niCoPaWQxj&sig=1CXTV74dETqppmKFz0zWM-aoArI
  • Seed, H. B., Tokimatsu, K., Harder, L. F., Chung, M. and Riley, M. [1985] “Influence of SPT procedures in soil liquefaction resistance evaluations,” Journal of Geotechnical Engineering (12), 1425–1445. doi:10.1061/(ASCE)0733-9410(1985)111:12(1425)
  • Tsegaye, A. B. [2010] Liquefaction Model (UBC3D), Plaxis B.V, Delft, The Netherlands.
  • Yoshimi, Y. and Tokimatsu, K. [1977] “Settlement of Buildings on Saturated sand during earthquakes,” Proceedings from the Ninth World Conference on Earthquake Engineering, Tokyo-Kyoto, Japan 17(1), 95–100.
  • Youd, T. L., Idriss, I. M., Andrus, R. D., Arango, I., Castro, G., Christian, J. T., Dobry, R., Finn, W. D. L., Harder, L. F., Hynes, M. E., Ishihara, K., Koester, J. P., Liao, S. S. C., Marcuson, W. F., Martin, G. R., Mitchell, J. K., Moriwaki, Y., Power, M. S., Robertson, P. K., Seed, R. B. and Stokoe, K. H. [2001] “Liquefaction resistance of soils: summary report from the 1996 NCEER and 1998 NCEER/NSF workshops on evaluation of liquefaction resistance of soils,” Journal of Geotechnical and Geoenvironmental Engineering 127(10), 817–833. doi:10.1061/(ASCE)1090-0241(2001)127:10(817).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.