883
Views
11
CrossRef citations to date
0
Altmetric
Original Articles

Performance-Based Tsunami Engineering for Risk Assessment of Structures Subjected to Multi-Hazards: Tsunami following Earthquake

ORCID Icon, , ORCID Icon, &
Pages 2065-2084 | Received 22 Mar 2017, Accepted 04 May 2019, Published online: 23 May 2019

References

  • Alam, M. S., Barbosa, A. R., Scott, M. H., Cox, D. T. and van de Lindt, J. W. [2018] “Development of physics-based tsunami fragility functions considering structural member failures,” ASCE Journal of Structural Engineering. 144(3). doi:10.1061/(ASCE)ST.1943-541X.0001953
  • Arcos, M. and LeVeque, R. [2015] “Velocity measurements near Hawaii compared to model simulations of the 11 march 2011 Tohoku tsunami,” Pure and Applied Geophysics 172, 849.
  • ASCE. [2016] Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers, Reston, VA.
  • Attary, N., et al. [2016] “Methodology for development of physics-based tsunami fragilities,” Journal of Structural Engineering143(5), 04016223.
  • Attary, N., et al. [2017] “Performance-Based Tsunami Engineering Methodology for Risk Assessment of Structures,” Engineering Structures, 141, 676–686. Elsevier.
  • Baker, J. W. and Jayaram, N. [2008] “Correlation of spectral acceleration values from NGA ground motion models,” Earthquake Spectra 24(1), 299–317. doi:10.1193/1.2857544.
  • Barbato, M., et al. [2013] “Performance-based hurricane engineering (PBHE) framework,” Structural Safety 45, 24–35. doi:10.1016/j.strusafe.2013.07.002.
  • Building Seismic Safety Council. [1997] NEHRP Guidelines for the Seismic Rehabilitation of Buildings. FEMA-273, Federal Emergency Management Agency, Washington, DC.
  • Campbell, K. W. and Bozorgnia, Y. [2014] “NGA-West2 ground motion model for the average horizontal components of PGA, PGV, and 5% damped linear acceleration response spectra,” Earthquake Spectra 30(3), 1087–1115. doi:10.1193/062913EQS175M.
  • Chock, G. Y. [2016] “Design for tsunami loads and effects in the ASCE 7-16 standard,” Journal of Structural Engineering 04016093. doi:10.1061/(ASCE)ST.1943-541X.0001565.
  • Ciampoli, M., Petrini, F. and Augusti, G. [2011] “Performance-based wind engineering: towards a general procedure,” Structural Safety 33(6), 367–378. doi:10.1016/j.strusafe.2011.07.001.
  • Dames and Moore. [1980] Design and Construction Standards for Residential Construction in Tsunami Prone Areas in Hawaii, Prepared for Federal Emergency Management Agency, Washington, D.C.
  • Deierlein, G., Krawinkler, H. and Cornell, C. [2003] “A framework for performance-based earthquake engineering,” Pacific Conference on Earthquake Engineering, Citeseer, Canterbury, Christchurch, New Zealand, pp. 1–8.
  • Der Kiureghian, A. and Liu, P.-L. [1986] “Structural reliability under incomplete probability information,” Journal of Engineering Mechanics 112(1), 85–104. doi:10.1061/(ASCE)0733-9399(1986)112:1(85).
  • Dias, W., Yapa, H. and Peiris, L. [2009] “Tsunami vulnerability functions from field surveys and Monte Carlo simulation,” Civil Engineering and Environmental Systems 26(2), 181–194. doi:10.1080/10286600802435918.
  • Ellingwood, B. [1980] Development of a Probability Based Load Criterion for American National Standard A58: Building Code Requirements for Minimum Design Loads in Buildings and Other Structures (Vol. 13), US Department of Commerce, National Bureau of Standards, Gaithersburg, MD.
  • FEMA. [2010] HAZUS-MH MR5: Technical Manual, Federal Emergency Management Agency, Washington, D.C.
  • FEMA. [2017] Hazus Tsunami Model Technical Guidance, Federal Emergency Management Agency, Washington, D.C.
  • FEMA P646, J. [2008] Guidelines for Design of Structures for Vertical Evacuation from Tsunamis, Federal Emergency Management Agency, Washington, DC.
  • Field, E. H., et al. [2005] “Hazard calculations for the WGCEP-2002 earthquake forecast using OpenSHA and distributed object technologies,” Seismological Research Letters 76(2), 161–167.
  • Fritz, C. O., Morris, P. E. and Richler, J. J. [2012] “Effect size estimates: current use, calculations, and interpretation,” Journal of Experimental Psychology: General 141(1), 2. doi:10.1037/a0024338.
  • Hamilton, S. R. [2011] “Performance-based fire engineering for steel framed structures: Aprobabilistic methodology,” Doctoral dissertation, Stanford University, Stanford, CA.
  • Kim, J., Park, J.-H. and Lee, T.-H. [2011] “Sensitivity analysis of steel buildings subjected to column loss,” Engineering Structures 33(2), 421–432. doi:10.1016/j.engstruct.2010.10.025.
  • Koshimura, S., Namegaya, Y. and Yanagisawa, H. [2009] “Tsunami fragility—a new measure to identify tsunami damage,” Journal of Disaster Research 4(6), 479–488. doi:10.20965/jdr.2009.p0479.
  • Krawinkler, H.[2000] “State of the art report on systems performance of steel moment frames subject to earthquake ground shaking,” Report no. FEMA-355C. SAC Joint Venture.
  • Macabuag, J., Rossetto, T. and Lloyd, T. [2013] “Structural analysis for the generation of analytical tsunami fragility functions,” 10th International Conference on Urban Earthquake Engineering, March 1–2, Tokyo Institute of Technology, Tokyo, Japan.
  • Mahoney, M. and Hanson, R. [2009] Quantification of Building Seismic Performance Factors, Federal Emergency Management Agency, Washington, DC.
  • McCullough, M. and Kareem, A. [2011] “A framework for performance-based engineering in multi-hazard coastal environments,” Proceedings of the 2011 Structures Congress, Las Vegas, USA, April, 14–16 2011.
  • Nelsen, R. B. [2007] An Introduction to Copulas, Springer Science & Business Media, Berlin/Heidelberg, Germany.
  • Ngo, N. and Robertson, I. N. [2012] “Video analysis of the march 2011 tsunami in Japan’s coastal cities,” Research Report UHM/CEE/12.
  • Officials, I.C.o.B. [1997] Uniform building code. International Conference of Building Officials.
  • Pacific Gas & Electric Company [2010] “Methodology for probabilistic tsunami hazard analysis: trial application for the diablo canyon power plant site,” PEER Report.
  • Park, H., et al. [2013] “Tsunami inundation modeling in constructed environments: a physical and numerical comparison of free-surface elevation, velocity, and momentum flux,” Coastal Engineering 79, 9–21. doi:10.1016/j.coastaleng.2013.04.002.
  • Park, S., et al. [2012a] “Successive earthquake-tsunami analysis to develop collapse fragilities,” Journal of Earthquake Engineering 16(6), 851–863. doi:10.1080/13632469.2012.685209.
  • Park, S., et al. [2012b] “Concept of community fragilities for tsunami coastal inundation studies,” Natural Hazards Review 14(4), 220–228. doi:10.1061/(ASCE)NH.1527-6996.0000092.
  • Petrini, F. and Ciampoli, M. [2012] “Performance-based wind design of tall buildings,” Structure and Infrastructure Engineering 8(10), 954–966.
  • Porter, K. A. [2003] “An overview of PEER’s performance-based earthquake engineering methodology,” Proceedings of Ninth International Conference on Applications of Statistics and Probability in Civil Engineering, San Francisco, CA.
  • Porter, K. A., Beck, J. L. and Shaikhutdinov, R. V. [2002] “Sensitivity of building loss estimates to major uncertain variables,” Earthquake Spectra 18(4), 719–743. doi:10.1193/1.1516201.
  • Rosowsky, D. V. and Ellingwood, B. R. [2002] “Performance-based engineering of wood frame housing: fragility analysis methodology,” Journal of Structural Engineering 128(1), 32–38. doi:10.1061/(ASCE)0733-9445(2002)128:1(32).
  • RSMeansonline. [2016] “RS means customer cost estimator,” 18 May 2016. Retrieved from http://www.rsmeans.com/estimator/index.asp
  • Sklar, M. [1959] Fonctions de répartition à n dimensions et leurs marges, Université Paris 8, Paris, France.
  • Suppasri, A., et al. [2013] “Building damage characteristics based on surveyed data and fragility curves of the 2011 Great East Japan tsunami,” Natural Hazards 66, 319–341. doi:10.1007/s11069-012-0487-8.
  • Suppasri, A., Koshimura, S. and Imamura, F. [2011] “Developing tsunami fragility curves based on the satellite remote sensing and the numerical modeling of the 2004 Indian Ocean tsunami in Thailand,” Natural Hazards and Earth System Sciences 11(1), 173–189. doi:10.5194/nhess-11-173-2011.
  • Tang, X.-S., et al. [2013] “Impact of copulas for modeling bivariate distributions on system reliability,” Structural Safety 44, 80–90. doi:10.1016/j.strusafe.2013.06.004.
  • Unnikrishnan, V. U. and Barbato, M. [2016] “Performance-based comparison of different storm mitigation techniques for residential buildings,” Journal of Structural Engineering 142(6), 04016011. doi:10.1061/(ASCE)ST.1943-541X.0001469.
  • Vamvatsikos, D. and Cornell, C. A. [2002] “Incremental dynamic analysis,” Earthquake Engineering & Structural Dynamics 31(3), 491–514. doi:10.1002/eqe.141.
  • Yeh, H., et al. [2014] “Tsunami loadings on structures: review and analysis,” Coastal Engineering Proceedings 1(34), 4. doi:10.9753/icce.v34.currents.4.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.