References
- Alath, S., and S. K. Kunnath. 1995. Modeling inelastic shear deformations in RC beam – Column joints. Engineering mechanics proceedings of 10th conference, University of Colorado at Boulder, Boulder, Colorado, May 21–24,vol. 2. New York: ASCE: p. 822–5.
- Al-Chaar, G., M. Issa, and S. Sweeney. 2002. Behavior of masonry-infilled non-ductile reinforced concrete frames. ASCE Journal of Structural Engineering 128 (8): 1055–63. doi: https://doi.org/10.1061/(ASCE)0733-9445(2002)128:8(1055).
- Arslan, M. H., and H. H. Korkmaz. 2007. What is to be learned from damage and failure of reinforced concrete structures during recent earthquakes in Turkey? Engineering Failure Analysis 14 (1): 1–22. doi: https://doi.org/10.1016/j.engfailanal.2006.01.003.
- ASCE/SEI 41. 2017. Seismic evaluation and retrofit of existing buildings. Reston, VA: American Society of Civil Engineers.
- ASCE/SEI 41-06. 2007. Seismic rehabilitation of existing buildings. Reston, VA: American Society of Civil Engineers.
- Asteris, P. G., D. M. Cotsovos, C. Z. Chrysostomou, A. Mohebkhah, and G. K. Al-Chaar. 2013. Mathematical micromodeling of infilled frames: State of the art. Engineering Structures 56: 1905–21. doi: https://doi.org/10.1016/j.engstruct.2013.08.010.
- Asteris, P. G., S. T. Antoniou, D. S. Sophianopoulos, and C. Z. Chrysostomou. 2011. Mathematical macromodeling of infilled frames: State of the art. ASCE Journal of Structural Engineering 137 (12): 1508–17. doi: https://doi.org/10.1061/(ASCE)ST.1943-541X.0000384.
- Basha, S. H., and H. B. Kaushik. 2019. A novel macromodel for prediction of shear failure in columns of masonry infilled RC frames under earthquake loading. Bulletin of Earthquake Engineering 17(4), 2219–2244.
- Bentz, E. C., F. J. Vecchio, and M. P. Collins. 2006. Simplified modified compression field theory for calculating shear strength of reinforced concrete elements. ACI Materials Journal 103 (4): 614.
- Bergami, A. V. 2007. Implementation and experimental verification of models for nonlinear analysis of masonry infilled r.c. frames. Ph.D. Thesis, Università degli Studi ROMA TRE, Rome, Italy.
- Bergami, A. V., and C. Nuti. 2015. Experimental tests and global modeling of masonry infilled frames. Earthquakes and Structures. doi: https://doi.org/10.12989/eas.2015.9.2.281.
- Biskinis, D. E., and M. N. Fardis. 2010. Flexure-controlled ultimate deformations of members with continuous or lap-spliced bars. Structural Concrete 11 (3): 127–38. doi: https://doi.org/10.1680/stco.2010.11.3.127.
- Blasi, G., F. De Luca, and M. A. Aiello. 2018. Brittle failure in RC masonry infilled frames: The role of infill overstrength. Engineering Structures 177: 506–18. doi: https://doi.org/10.1016/j.engstruct.2018.09.079.
- Burton, H., and G. Deierlein. 2014. Simulation of seismic collapse in non-ductile reinforced concrete frame buildings with masonry infills. ASCE Journal of Structural Engineering 140 ( SI: Computational simulation in structural engineering). doi: https://doi.org/10.1061/(ASCE)ST.1943-541X.0000921.
- Calvi, G. M., and D. Bolognini. 2001. Seismic response of reinforced concrete frames infilled with weakly reinforced masonry panels. Journal of Earthquake Engineering 5 (2): 153–85. doi: https://doi.org/10.1080/13632460109350390.
- Calvi, G. M., G. Magenes, and S. Pampanin. 2001. Studio sperimentale sulla risposta sismica di edifici a telaio in cemento armato progettati per soli carichi da gravità, ANIDIS conf. (In Italian).
- Celarec, D., and M. Dolšek. 2012. Practice-oriented probabilistic seismic performance assessment of infilled frames with consideration of shear failure of columns. Earthquake Engineering and Structural Dynamics 42 (9): 1339–60. doi: https://doi.org/10.1002/eqe.2275.
- Celarec, D., P. Ricci, and M. Dolšek. 2012. The sensitivity of seismic response parameters to the uncertain modelling variables of masonry-infilled reinforced concrete frames. Engineering Structures 35: 165–77. doi: https://doi.org/10.1016/j.engstruct.2011.11.007.
- Celik, O. C., and B. R. Ellingwood. 2008. Modeling beam-column joints in fragility assessment of gravity load designed reinforced concrete frames. Journal of Earthquake Engineering 12: 357–81. doi: https://doi.org/10.1080/13632460701457215.
- Celik, O. C., and B. R. Ellingwood. 2009. Seismic fragilities for non-ductile reinforced concrete frames-Role of aleatoric and epistemic uncertainties. Structural Safety 32 (1): 1–12. doi: https://doi.org/10.1016/j.strusafe.2009.04.003.
- CEN. 2004a. European standard EN1992-1-1. Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings. Brussels: Comité Européen de Normalisation.
- CEN. 2004b. European Standard EN1998-1:2004. Eurocode 8: Design of structures for earthquake resistance. Part 1: General rules, seismic actions and rules for buildings. Brussels: Comité Européen de Normalisation.
- Chrysostomou, C. Z., P. Gergely, and J. F. Abel. 2002. A six-strut model for nonlinear dynamic analysis of steel infilled frames. International Journal of Structural Stability and Dynamics 2 (3): 335–53. doi: https://doi.org/10.1142/S0219455402000567.
- Chrysostomou, C. Z., & Asteris, P. G. (2012). On the in-plane properties and capacities of infilled frames. Engineering Structures, 41, 385–402.
- Colangelo, F. 2003. Experimental evaluation of member-by-member models and damage indices for infilled frames. Journal of Earthquake Engineering 7 (1): 25–50. doi: https://doi.org/10.1080/13632460309350440.
- Colangelo, F. 2005. Pseudo-dynamic seismic response of reinforced concrete frames infilled with non-structural brick masonry. Earthquake Engineering and Structural Dynamics 34 (10): 1219–41. doi: https://doi.org/10.1002/(ISSN)1096-9845.
- Crisafulli, F. J. 1997. Seismic behaviour of reinforced concrete structures with Masonry lnfills. PhD Thesis, Department of Civil Engineering, University of Canterbury.
- Crisafulli, F. J., A. J. Carr, and R. Park. 2000. Analytical modelling of infilled frame structures – A general review. Bulletin-New Zealand Society for Earthquake Engineering 33 (1): 30–47.
- D.M. Norme tecniche alle quali devono uniformarsi le costruzioni in conglomerato cementizio, normale e precompresso ed a struttura metallica. alla G.U. n. 190 de 22/7/1972. (in Italian), Maggio 30.
- D.M. 2018. Norme tecniche per l’esecuzione delle opere in cemento armato normale e precompresso e per le strutture metalliche. Suppl. Ord. alla G.U. n. 65 del 18/3/1992. (in Italian), Febbraio 14.
- D.M. 2008. Approvazione delle nuove norme tecniche per le costruzioni. G.U. n. 29 del 4/2/2008. (in Italian), Gennaio 14.
- D.M. 2018. Aggiornamento delle nuove norme tecniche per le costruzioni. G.U. n. 42 del 20/2/2018. (in Italian), Gennaio 17.
- D’Ayala, D., J. Worth, and O. Riddle. 2009. Realistic shear capacity assessment of infill frames: Comparison of two numerical procedures. Engineering Structures 31 (8): 1745–61. doi: https://doi.org/10.1016/j.engstruct.2009.02.044.
- De Luca, F., G. M. Verderame, F. Gómez-Martínez, and A. Pérez-García. 2014. The structural role played by masonry infills on RC building performances after the 2011 Lorca, Spain, earthquake. Bulletin of Earthquake Engineering 12 (5): 1999–2026. doi: https://doi.org/10.1007/s10518-013-9500-1.
- De Risi, M. T., C. Del Gaudio, P. Ricci, and G. M. Verderame. 2018. In-plane behaviour and damage assessment of masonry infills with hollow clay bricks in RC frames. Engineering Structures 168: 257–75. doi: https://doi.org/10.1016/j.engstruct.2018.04.065.
- De Risi, M. T., P. Ricci, and G. M. Verderame. 2017. Modelling exterior unreinforced beam‐column joints in seismic analysis of non‐ductile RC frames. Earthquake Engineering & Structural Dynamics 46 (6): 899–923. doi: https://doi.org/10.1002/eqe.v46.6.
- De Risi, M. T., P. Ricci, G. M. Verderame, and G. Manfredi. 2016. Experimental assessment of unreinforced exterior beam-column joints with deformed bars. Engineering Structures 112: 215–32. doi: https://doi.org/10.1016/j.engstruct.2016.01.016.
- Del Gaudio, C., M. T. De Risi, P. Ricci, and G. M. Verderame. 2019. Empirical drift-fragility functions and loss estimation for infills in reinforced concrete frames under seismic loading. Bulletin of Earthquake Engineering 17 (3): 1285–330. doi: https://doi.org/10.1007/s10518-018-0501-y.
- Di Cesare, A., F. C. Ponzo, M. Vona, M. Dolce, A. Masi, M. R. Gallipoli, and M. Mucciarelli. 2014. Identification of the structural model and analysis of the global seismic behaviour of a RC damaged building. Soil Dynamics and Earthquake Engineering 65: 131–41. doi: https://doi.org/10.1016/j.soildyn.2014.06.005.
- Di Trapani, F., G. Macaluso, L. Cavaleri, and M. Papia. 2015. Masonry infills and RC frames interaction: Literature overview and state of the art of macromodeling approach. European Journal of Environmental and Civil Engineering 19 (9): 1059–95. doi: https://doi.org/10.1080/19648189.2014.996671.
- Dolšek, M., and P. Fajfar. 2008. The effect of masonry infills on the seismic response of a four-storey reinforced concrete frame – A deterministic assessment. Engineering Structures 30 (7): 1991–2001. doi: https://doi.org/10.1016/j.engstruct.2008.01.001.
- EERI. 2000. 1999 Kocaeli, Turkey earthquake reconnaissance report. Earthquake Spectra 16 (S1): 237–79.
- Elwood, K. J. 2004. Modelling failures in existing reinforced concrete columns. Canadian Journal of Civil Engineering 31 (5): 846–59. doi: https://doi.org/10.1139/l04-040.
- Elwood, K. J., and J. P. Moehle. 2005. Drift capacity of reinforced concrete columns with light transverse reinforcement. Earthquake Spectra 21 (1): 71–89. doi: https://doi.org/10.1193/1.1849774.
- Fardis, M. N., and T. B. Panagiotakos. 1997. Seismic design and response of bare and infilled reinforced concrete buildings – Part II: Infilled structures. Journal of Earthquake Engineering 1 (3): 473–503.
- Genesio, G. 2012. Seismic assessment of RC exterior beam-column joints and retrofit with haunches using post-installed anchors. Ph.D. Thesis, University of Stuttgart, Stuttgart, Germany.
- Ghannoum, W. M., and J. P. Moehle. 2012. Dynamic collapse analysis of a concrete frame sustaining column axial failures. ACI Structural Journal 109 (3): 403–12.
- Hak, S., P. Morandi, G. Magenes, and T. J. Sullivan. 2012. Damage control for clay masonry infills in the design of RC frame structures. Journal of Earthquake Engineering 16 (sup1): 1–35. doi: https://doi.org/10.1080/13632469.2012.670575.
- Jeon, J. S. 2014. Shafieezadeh A and DesRoches R. Statistical models for shear strength of RC beam‐column joints using machine‐learning techniques. Earthquake Engineering & Structural Dynamics 43 (14): 2075–95. doi: https://doi.org/10.1002/eqe.2437.
- Jeon, J. S., J. H. Park, and R. DesRoches. 2015. Seismic fragility of lightly reinforced concrete frames with masonry infills. Earthquake Engineering and Structural Dynamics 44 (11): 1783–803. doi: https://doi.org/10.1002/eqe.2555.
- Karakostas, C., V. Lekidis, T. Makarios, T. Salonikios, I. Sous, and M. Demosthenous. 2005. Seismic response of structures and infrastructure facilities during the Lefkada, Greece earthquake of 14/8/2003. Engineering Structures 27 (2): 213–27. doi: https://doi.org/10.1016/j.engstruct.2004.09.009.
- Liauw, T. C., and K. H. Kwan. 1984. Unified plastic analysis for infilled frames. ASCE Journal of Structural Engineering 111 (7): 1427–1148. doi: https://doi.org/10.1061/(ASCE)0733-9445(1985)111:7(1427).
- Mander, J. B., M. J. N. Priestley, and R. Park. 1988. Theoretical stress-strain model for confined concrete. ASCE Journal of Structural Engineering 114 (8): 1804–26. doi: https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
- McKenna, F., G. L. Fenves, and M. H. Scott. 2010. OpenSees: Open system for earthquake engineering simulation. Berkeley, CA: Pacific Earthquake Engineering Research Center. University of California. http://opensees.berkeley.edu.
- Mehrabi, A. B., P. B. Shing, M. P. Schuller, and J. L. Noland. 1994. Performance of masonry infilled R/C frames under in-plane lateral loads. Report No. CU/SR-94/6. Department of Civil, Environmental, and Architectural Engineering, University of Colorado at Boulder, Boulder, CO.
- Mehrabi, A. B., P. B. Shing, M. P. Schuller, and J. L. Noland. 1996. Experimental evaluation of masonry-infilled RC frames. ASCE Journal of Structural Engineering 122 (3): 228–37. doi: https://doi.org/10.1061/(ASCE)0733-9445(1996)122:3(228).
- Milanesi, R. R., Morandi, P., & Magenes, G. (2018). Local effects on RC frames induced by AAC masonry infills through FEM simulation of in-plane tests. Bulletin of Earthquake Engineering, 16(9), 4053–4080.
- Model Code 2010-First complete draft-Volume 2: Model Code. fib Fédération internationale du béton, 2010.
- Panagiotakos, T. B., and M. N. Fardis. 1996. Seismic response of infilled RC frames structures. In: Proceedings of the 11th world conference on earthquake engineering, Acapulco, México. Paper No. 225.
- Park, S., and K. M. Mosalam. 2013. Simulation of reinforced concrete frames with non-ductile beam-column joints. Earthquake Spectra 29 (1): 233–57. doi: https://doi.org/10.1193/1.4000100.
- Pires, F., and E. C. Carvalho. 1992. The behaviour of infilled reinforced concrete frames under horizontal cyclic loading. Proceedings of the 10th World Conference on Earthquake Engineering, July 19-24, Madrid, Spain.
- Ricci, P., F. De Luca, and G. M. Verderame. 2011. 6th April 2009 L’Aquila earthquake, Italy: Reinforced concrete building performance. Bulletin of Earthquake Engineering 9 (1): 285–305. doi: https://doi.org/10.1007/s10518-010-9204-8.
- Ricci, P., M. T. De Risi, G. M. Verderame, and G. Manfredi. 2013. Influence of infill distribution and design typology on seismic performance of low-and mid-rise RC buildings. Bulletin of Earthquake Engineering 11 (5): 1585–616. doi: https://doi.org/10.1007/s10518-013-9453-4.
- Ricci, P., M. T. De Risi, G. M. Verderame, and G. Manfredi. 2016a. Experimental tests of unreinforced exterior beam-column joints with plain bars. Engineering Structures. doi: https://doi.org/10.1016/j.engstruct.2016.03.033.
- Ricci, P., M. T. De Risi, G. M. Verderame, and G. Manfredi. 2016b. Procedures for calibration of linear models for damage limitation in design of masonry-infilled RC frames. Earthquake Engineering and Structural Dynamics. doi: https://doi.org/10.1002/eqe.2709.
- Romano, F., M. Faggella, R. Gigliotti, M. Zucconi, and B. Ferracuti. 2018. Comparative seismic loss analysis of an existing non-ductile RC building based on element fragility functions proposals, Eng. Structures 177: 707–23. doi: https://doi.org/10.1016/j.engstruct.2018.08.005.
- Saneinejad, A., and B. Hobbs. 1995. Inelastic design of infilled frames. ASCE Journal of Structural Engineering 121 (4): 634–50. doi: https://doi.org/10.1061/(ASCE)0733-9445(1995)121:4(634).
- Sattar, S., and A. B. Liel. 2015a. Seismic performance of nonductile reinforced concrete frames with masonry infill walls: I. Development of a strut model enhanced by finite element models. Earthquake Spectra. doi: https://doi.org/10.1193/090914EQS139M.
- Sattar, S., and A. B. Liel. 2015b. Seismic performance of nonductile reinforced concrete frames with masonry infill walls: II. Collapse assessment. Earthquake Spectra. doi: https://doi.org/10.1193/091514EQS141M.
- Sezen, H., and J. P. Moehle. 2004. Shear strength model for lightly reinforced concrete columns. Journal of Structural Engineering 130: 11. doi: https://doi.org/10.1061/(ASCE)0733-9445(2004)130:11(1692).
- Sharma, A., R. Eligehausen, and G. R. Reddy. 2011. A new model to simulate joint shear behavior of poorly detailed beam–Column connections in RC structures under seismic loads, Part I: Exterior joints. Engineering Structures 33 (3): 1034–51. doi: https://doi.org/10.1016/j.engstruct.2010.12.026.
- Smith, B. S. 1962. Lateral stiffness of infilled frames. Journal of the Structural Division 88 (6): 183–226.
- Stavridis, A., I. Koutromanos, and P. B. Shing. 2012. Shake‐table tests of a three‐story reinforced concrete frame with masonry infill walls. Earthquake Engineering & Structural Dynamics 41 (6): 1089–108. doi: https://doi.org/10.1002/eqe.v41.6.
- Stylianidis, K. C. 1985. Experimental investigation of the behaviour of the single-story infilled R.C. frames under cyclic quasi-static horizontal loading (parametric analysis). Ph.D. Thesis, University of Thessaloniki, Thessaloniki, Greece.
- Vecchio, F. J., and M. P. Collins. 1986. The modified compression-field theory for reinforced concrete elements subjected to shear. ACI Journal 83 (2): 219–31.
- Verderame, G. M., M. T. De Risi, and P. Ricci. 2018. Experimental investigation of exterior unreinforced beam-column joints with plain and deformed bars. Journal of Earthquake Engineering 22 (3): 404–34. doi: https://doi.org/10.1080/13632469.2016.1233917.
- Verderame, G. M., P. Ricci, C. Del Gaudio, and M. T. De Risi. 2016. Experimental tests on masonry infilled gravity- and seismic-load designed RC frames. 16th International Brick and Block Masonry Conference (IBMAC 2016), June 26- 30,Padova, Italy. Paper 0311_1.
- Verderame, G. M., P. Ricci, M. Esposito, and G. Manfredi 2012. STIL v1.0 – Software per la caratterizzazione delle proprietà meccaniche degli acciai da c.a. tra il 1950 e il 2000. ReLUIS. http://www.reluis.it/
- Wood, R. H. 1978. Plastic composite action and collapse design of unreinforced shear wall panels in frames. Proceedings of the Institution of Civil Engineers, London, England, Part 2, Vol. 65, 381-411.