References
- Asai, T., C.-M. Chang, and B. F. Spencer. 2015. Real-time hybrid simulation of a smart base-isolated building. Journal of Engineering Mechanics 141 (3): 04014128. doi:https://doi.org/10.1061/(ASCE)EM.1943-7889.0000844.
- Barone, S., G. M. Calvi, and A. Pavese. 2019. Experimental dynamic response of spherical friction-based isolation devices. Journal of Earthquake Engineering 23 (9): 1465–84. doi: https://doi.org/10.1080/13632469.2017.1387201.
- Bhuiyan, A. R., and M. S. Alam. 2013. Seismic performance assessment of highway bridges equipped with superelastic shape memory alloy-based laminated rubber isolation bearing. Engineering Structures 49: 396–407. doi: https://doi.org/10.1016/j.engstruct.2012.11.022.
- Braga, F., and M. Laterza. 2004. Field testing of low-rise base isolated building. Engineering Structures 26 (11): 1599–610. doi: https://doi.org/10.1016/j.engstruct.2004.06.002.
- Castaldo, P., G. Amendola, and B. Palazzo. 2017. Seismic fragility and reliability of structures isolated by friction pendulum devices: Seismic reliability-based design (SRBD). Earthquake Engineering & Structural Dynamics 46 (3): 425–46. doi: https://doi.org/10.1002/eqe.2798.
- Chen, J. B., W. Q. Liu, Y. B. Peng, and J. Li. 2007. Stochastic seismic response and reliability analysis of base-isolated structures. Journal of Earthquake Engineering 11 (6): 903–24. doi: https://doi.org/10.1080/13632460701242757.
- Chen, P. C., S. C. Hsu, Y. J. Zhong, and S. J. Wang. 2019. Real-time hybrid simulation of smart base-isolated raised story systems for high-tech industry. Smart Structures and Systems 23 (1): 91–106.
- Chu, S. Y., T. T. Soong, and A. M. Reinhorn. 2005. Active, hybrid and semi-active structural control. New York: John Wiley & Sons.
- Constantinou, M., A. Mokha, and A. Reinhorn. 1990. Teflon bearings in base isolation II: Modeling. Journal of Structural Engineering 116 (2): 455–74. doi: https://doi.org/10.1061/(ASCE)0733-9445(1990)116:2(455).
- Conte, M., and A. Igartua. 2012. Study of PTFE composites tribological behavior. Wear 296 (1–2): 568–74. doi: https://doi.org/10.1016/j.wear.2012.08.015.
- Dezfuli, F. H., and M. S. Alam. 2013. Shape memory alloy wire-based smart natural rubber bearing. Smart Materials and Structures 22 (4): 045013. doi: https://doi.org/10.1088/0964-1726/22/4/045013.
- Dolce, M., D. Cardone, and F. Croatto. 2005. Frictional behavior of steel-PTFE interfaces for seismic isolation. Bulletin of Earthquake Engineering 3 (1): 75–99. doi: https://doi.org/10.1007/s10518-005-0187-9.
- Dolce, M., D. Cardone, and G. Palermo. 2007. Seismic isolation of bridges using isolation systems based on flat sliding bearings. Bulletin of Earthquake Engineering 5 (4): 491–509. doi: https://doi.org/10.1007/s10518-007-9044-3.
- Fenz, D. M., and M. C. Constantinou Mechanical behavior of multi-spherical sliding bearings. MCEER Report No. 08-0007, 2008, pp. 100.
- Housner, G. W., L. A. Bergman, T. K. Caughey, A. G. Chassiakos, R. O. Claus, S. F. Masri, R. E. Skelton, T. T. Soong, B. F. Spencer Jr, and T. P. Yao James. 1997. Structural control: Past, present, and future. ASCE Journal of Engineering Mechanics 123 (9): 897–971. doi: https://doi.org/10.1061/(ASCE)0733-9399(1997)123:9(897).
- Huang, N. E., Z. Shen, S. R. Long, M. C. Wu, H. H. Shih, Q. Zheng, N. C. Yen, C. C. Tung, and H. H. Liu. 1998. The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis. Proceedings of the Royal Society of London. Series A 454 (1971): 903–95. doi: https://doi.org/10.1098/rspa.1998.0193.
- Hwang, J. S., and T. Y. Hsu. 2000. Experimental study of isolated building under triaxial ground excitations. Journal of Structural Engineering 126 (8): 879–86. doi: https://doi.org/10.1061/(ASCE)0733-9445(2000)126:8(879).
- Ismail, M., J. Rodellar, G. Carusone, M. Domaneschi, and L. Martinelli. 2013. Characterization, modeling and assessment of Roll-N-Cage isolator using the cable-stayed bridge benchmark. Acta Mechanica 224 (3): 525–47. doi: https://doi.org/10.1007/s00707-012-0771-4.
- Koo, J. H., D. D. Jang, M. Usman, and H. J. Jung. 2009. A feasibility study on smart base isolation systems using magneto-rheological elastomers. Structural Engineering and Mechanics 32 (6): 755–70. doi: https://doi.org/10.12989/sem.2009.32.6.755.
- Kriezis, E. E., T. D. Tsiboukis, S. M. Panas, and J. A. Tegopoulos. 1992. Eddy currents: Theory and applications. Proceedings of the IEEE 80 (10): 1559–89. doi: https://doi.org/10.1109/5.168666.
- Lin, T. W., C. C. Chern, and C. C. Hone. 1995. Experimental study of base isolation by free rolling rods. Earthquake Engineering & Structural Dynamics 24 (12): 1645–50. doi: https://doi.org/10.1002/eqe.4290241207.
- Liu, Z. J., W. Liu, and Y. B. Peng. 2016. Random function based spectral representation of stationary and non-stationary stochastic processes. Probabilistic Engineering Mechanics 45: 115–26. doi: https://doi.org/10.1016/j.probengmech.2016.04.004.
- Lomiento, G., N. Bonessio, and G. Benzoni. 2013. Friction model for sliding bearings under seismic excitation. Journal of Earthquake Engineering 17 (8): 1162–91. doi: https://doi.org/10.1080/13632469.2013.814611.
- Loutridis, S. J. 2005. Decomposition of impulse responses using complex wavelets. Journal of the Audio Engineering Society 53 (9): 796–811.
- Madden, G. J., M. D. Symans, and N. Wongprasert. 2002. Experimental verification of seismic response of building frame with adaptive sliding base-isolation system. Journal of Structural Engineering 128 (8): 1037–45. doi: https://doi.org/10.1061/(ASCE)0733-9445(2002)128:8(1037).
- Marano, G. C., and R. Greco. 2003. Efficiency of base isolated systems in structural seismic protection and energetic assessment. Earthquake Engineering & Structural Dynamics 32 (10): 1505–31. doi: https://doi.org/10.1002/eqe.286.
- Mokha, A., M. C. Constantinou, A. M. Reinhorn, and V. A. Zayas. 1991. Experimental study of friction-pendulum isolation system. Journal of Structural Engineering 117 (4): 1201–17. doi: https://doi.org/10.1061/(ASCE)0733-9445(1991)117:4(1201).
- Morgan, T. A., and S. A. Mahin. 2011. The use of base isolation systems to achieve complex seismic performance objectives. PEER Report No. 2011-06, pp. 14.
- Nagarajaiah, S., and N. Varadarajan. 2005. Short time Fourier transform algorithm for wind response control of buildings with variable stiffness TMD. Engineering Structures 27 (3): 431–41. doi: https://doi.org/10.1016/j.engstruct.2004.10.015.
- Narasimhan, S., S. Nagarajaiah, E. A. Johnson, and H. P. Gavin. 2006. Smart base-isolated benchmark building. Part I: Problem definition. Structural Control & Health Monitoring 13 (2–3): 573–88. doi: https://doi.org/10.1002/stc.99.
- Paulson, T. J., D. P. Abrams, and R. L. Mayes. 1991. Shaking table study of base isolation for masonry buildings. Journal of Structural Engineering 117 (11): 3315–36. doi: https://doi.org/10.1061/(ASCE)0733-9445(1991)117:11(3315).
- Peng, Y. B., and J. Li. 2019. Stochastic optimal control of structures. Singapore: Springer.
- Peng, Y. B., J. B. Chen, and J. Li. 2014. Nonlinear response of structures subjected to stochastic excitations via probability density evolution method. Advances in Structural Engineering 17 (6): 801–16. doi: https://doi.org/10.1260/1369-4332.17.6.801.
- Peng, Y. B., L. C. Ding, and J. B. Chen. 2019a. Performance evaluation of base‐isolated structures with sliding hydromagnetic bearings. Structural Control & Health Monitoring 26 (1): e2278. doi: https://doi.org/10.1002/stc.2278.
- Peng, Y. B., L. C. Ding, J. B. Chen, J. T. Liu, and R. Villaverde. 2020. Shaking table test of seismic isolated structures with sliding hydromagnetic bearings. Journal of Structural Engineering. doi: https://doi.org/10.1061/(ASCE)ST.1943-541X.0002739.
- Peng, Y. B., L. C. Ding, J. B. Chen, and R. Villaverde. 2019b. Experimental study of sliding hydromagnetic isolators for seismic protection. Journal of Structural Engineering 145 (5): 04019021. doi: https://doi.org/10.1061/(ASCE)ST.1943-541X.0002300.
- Peng, Y. B., R. Ghanem, and J. Li. 2013. Generalized optimal control policy for stochastic optimal control of structures. Structural Control & Health Monitoring 20: 67–89.
- Peng, Y. B., and T. C. Huang. 2019. Sliding implant-magnetic bearings for adaptive seismic mitigation of base-isolated structures. Structural Control & Health Monitoring 26 (10): e2431. doi: https://doi.org/10.1002/stc.2431.
- Quaglini, V., P. Dubini, D. Ferroni, and C. Poggi. 2009. Influence of counterface roughness on friction properties of engineering plastics for bearing applications. Materials & Design 30 (5): 1650–58. doi: https://doi.org/10.1016/j.matdes.2008.07.025.
- Roussis, P. C., M. C. Constantinou, M. Erdik, E. Durukal, and M. Dicleli. 2003. Assessment of performance of seismic isolation system of Bolu Viaduct. Journal of Bridge Engineering 8 (4): 182–90. doi: https://doi.org/10.1061/(ASCE)1084-0702(2003)8:4(182).
- Saaed, T. E., G. Nikolakopoulos, J. E. Jonasson, and H. Hedlund. 2015. A state-of-the-art review of structural control systems. Journal of Vibration and Control 21 (5): 919–37. doi: https://doi.org/10.1177/1077546313478294.
- Smith, J. S. 2005. The local mean decomposition and its application to EEG perception data. Journal of the Royal Society Interface 2 (5): 443–54. doi: https://doi.org/10.1098/rsif.2005.0058.
- Soong, T. T. 1990. Active structural control: Theory and practice. New York: Longman Scientific & Technical.
- Soong, T. T., and G. F. Dargush. 1997. Passive energy dissipation systems in structural engineering. New York: John Wiley & Sons.
- Spencer, B. F., Jr, and S. Nagarajaiah. 2003. State of the art of structural control. Journal of Structural Engineering Forum 129 (7): 845–56. doi:https://doi.org/10.1061/(ASCE)0733-9445(2003)129:7(845).
- Toopchi-Nezhad, H., M. J. Tait, and R. G. Drysdale. 2009. Shake table study on an ordinary low-rise building seismically isolated with SU-FREIs (stable unbonded-fiber reinforced elastomeric isolators). Earthquake Engineering and Structural Dynamics 38 (11): 1335–57. doi: https://doi.org/10.1002/eqe.923.
- Tsai, C. S., W. S. Chen, T. C. Chiang, and B. J. Chen. 2010. Component and shaking table tests for full‐scale multiple friction pendulum system. Earthquake Engineering & Structural Dynamics 35 (13): 1653–75. doi: https://doi.org/10.1002/eqe.598.
- Unal, H., and A. Mimaroglu. 2003. Friction and wear behaviour of unfilled engineering thermoplastics. Materials & Design 24 (3): 183–87. doi: https://doi.org/10.1016/S0261-3069(03)00018-9.
- Villaverde, R. 2017. Base isolation with sliding hydromagnetic bearings: Concept and feasibility study. Structure & Infrastructure Engineering 13 (6): 709–21. doi: https://doi.org/10.1080/15732479.2016.1187634.
- Wu, G., K. Wang, P. Zhang, and G. Lu. 2018. Effect of mechanical degradation of laminated elastomeric bearings and shear keys upon seismic behaviors of small-to-medium-span highway bridges in transverse direction. Earthquake Engineering and Engineering Vibration 17 (1): 205–20. doi: https://doi.org/10.1007/s11803-018-0435-z.
- Yao James, T. P. 1972. Concept of structural control. ASCE Journal of Structural Division 98 (ST7): 1567–74.
- Zhang, R. Y., B. M. Phillips, S. Taniguchi, M. Ikenaga, and K. Ikago. 2017. Shake table real-time hybrid simulation techniques for the performance evaluation of buildings with inter-story isolation. Structural Control & Health Monitoring 24 (10): e1971. doi: https://doi.org/10.1002/stc.1971.