References
- Abrams, D. P. 1987. Influence of axial force variations on flexural behaviour of reinforced concrete columns. ACI Structural Journal 84 (3): 246–254.
- ACI Committee 318. 2014. Building code requirements for structural concrete (ACI 318M-14) and commentary (ACI 318RM-14). Farmington Hills, MI: American Concrete Institute.
- ACI ITG-5.1-07. 2008. Acceptance criteria for special unbonded post‐tensioned precast structural walls based on validation testing and commentary. Farmington Hills, MI: American Concrete Institute.
- Bechtoula, H., S. Kono, and F. Watanabe. 2005. Experimental and analytical investigations of seismic performance of cantilever reinforced concrete columns under varying transverse and axial Loads. Journal of Asian Architecture and Building Engineering 4 (2): 467–74. doi: https://doi.org/10.3130/jaabe.4.467.
- Bousias, S. N., G. Verzeletti, M. N. Fardis, and E. Gutierrez. 1995. Load-path effects in column biaxial bending with axial force. Journal of Engineering Mechanics 121 (5): 596–605. doi: https://doi.org/10.1061/(ASCE)0733-9399(1995)121:5(596).
- Calvi, G. M., P. Ceresa, C. Casarotti, D. Bolognini, and F. Auricchio. 2004. Effects of axial force variation in the seismic response of bridges isolated with friction pendulum systems. Journal of Earthquake Engineering 8: 187–224. doi: https://doi.org/10.1080/13632460409350525.
- Di Ludovico, M., G. M. Verderame, A. Prota, G. Manfredi, and E. Cosenza. 2013. Experimental behaviour of nonconforming RC columns with plain bars under constant axial load and biaxial bending. Journal of Structural Engineering 139 (6): 897–914. doi: https://doi.org/10.1061/(ASCE)ST.1943-541X.0000703.
- Di Sarno, L., A. S. Elnashai, and G. Manfredi. 2010. Seismic response of RC members subjected to the 2009 L’Aquila (Italy) near-field earthquake ground motions. Report No.01-2010, Mid-America Earthquake Center, University of Illinois at Urbana-Champaign, USA.
- ElMandooh, G. K., and A. Ghobarah. 2003. Flexural and shear hysteretic behaviour of reinforced concrete columns with variable axial load. Engineering Structures 25 (11): 1353–67. doi: https://doi.org/10.1016/S0141-0296(03)00111-1.
- Esmaeily, A., and Y. Xiao. 2004. Behaviour of reinforced concrete columns under variable axial loads. ACI Structural Journal 101 (1): 124–32.
- Esmaeily, A., and Y. Xiao. 2005. Behaviour of reinforced concrete columns under variable axial loads: Analysis. ACI Structural Journal 102 (5): 736–744.
- Farahi, M., and S. Erfani. 2017. Developing representative dual loading protocols for the columns of steel special moment frames based on the seismic demands on these members. Journal of Earthquake Engineering 21 (8): 1283–304. doi: https://doi.org/10.1080/13632469.2016.1211564.
- Farsangi, E. N., and A. A. Tasnimi. 2016. The influence of coupled horizontal–vertical ground excitations on the collapse margins of modern RC-MRFs. International Journal of Advanced Structural Engineering 8: 169–92. doi: https://doi.org/10.1007/s40091-016-0122-0.
- Filippou, F. C., E. P. Popov, and V. V. Bertero. 1983. Effects of bond deterioration on hysteretic behaviour of reinforced concrete joints. Report EERC 83-19, Earthquake Engineering Research Center, University of California, Berkeley.
- Giuffrè, A., and P. E. Pinto. 1970. Il comportamento del cemento armato per sollecitazioni cicliche diforte intensità. Giornale del Genio Civile.
- Hashemi, M. J., -H.-H. Tsang, Y. Al-Ogaidi, J. L. Wilson, and R. Al-Mahaidi. 2017. Collapse assessment of reinforced concrete building columns through multi-axis hybrid simulation. ACI Materials Journal 114 (2): 437–50.
- Hashemi, M. J., R. Al-Mahaidi, R. Kalfat, and G. Burnett. 2015. Development and validation of multi-axis substructure testing system for full-scale experiments. Australian Journal of Structural Engineering 16 (4): 302–15. doi: https://doi.org/10.1080/13287982.2015.1092692.
- Hashemi, M. J., Y. Al-Ogaidi, R. Al-Mahaidi, R. Kalfat, -H.-H. Tsang, and J. L. Wilson. 2016. Application of hybrid simulation for collapse assessment of post-earthquake CFRP-repaired RC columns. Journal of Structural Engineering 143 (1): 04016149.
- He, R., Y. Yang, and L. H. Sneed. 2015. Seismic repair of reinforced concrete bridge columns: Review of research findings. Journal of Bridge Engineering 20 (12): 04015015. doi: https://doi.org/10.1061/(ASCE)BE.1943-5592.0000760.
- Kim, T.-H., Y.-J. Kim, and H. M. Shin. 2007. Seismic performance assessment of reinforced concrete bridge columns under variable axial load. Magazine of Concrete Research 59 (2): 87–96. doi: https://doi.org/10.1680/macr.2007.59.2.87.
- Kuramoto, H., T. Kabeyasawa, and F. H. Shen. 1995. Influence of axial deformation on ductility of high-strength reinforced-concrete columns under varying triaxial forces. ACI Structural Journal 92 (5): 610–18.
- LeBorgne, M. R., and W. M. Ghannoum. 2014. Analytical element for simulating lateral-strength degradation in reinforced concrete columns and other frame members. Journal of Structural Engineering 140 (7): 04014038. doi: https://doi.org/10.1061/(ASCE)ST.1943-541X.0000925.
- Li, K.-N., S. Otani, and H. Aoyama. 1988. Reinforced concrete columns under varying axial load and bi-directional lateral load reversals. Proceedings of Ninth World Conference on Earthquake Engineering, Tokyo, Japan.
- Li, X. 1994. Reinforced concrete columns under seismic lateral force and varying axial load. PhD diss., Department of Civil Engineering,University of Canterbury, Christchurch, New Zealand
- Low, S., and J. P. Moehle. 1987. Experimental study of reinforced concrete columns subject to multiaxial cyclic loading. Earthquake Engineering Research Centre, Rep. No UCB/EERC 87-14, University of California, Berkeley.
- Ma, Y., and J.-X. Gong. 2018. Probability identification of seismic failure modes of reinforced concrete columns based on experimental observations. Journal of Earthquake Engineering 22 (10): 1881–99. doi: https://doi.org/10.1080/13632469.2017.1309603.
- McKenna, F., G. L. Fenves, M. H. Scott, and B. Jeremie. 2000. Open system for earthquake engineering simulation. OpenSees, University of California, Berkeley, CA.
- Menegon, S. J., -H.-H. Tsang, E. Lumantarna, N. T. K. Lam, J. L. Wilson, and E. F. Gad. 2019. Framework for seismic vulnerability assessment of reinforced concrete buildings in Australia. Australian Journal of Structural Engineering 20 (2): 143–58. doi: https://doi.org/10.1080/13287982.2019.1611034.
- Menegon, S. J., J. L. Wilson, Lam, and P. McBean. 2018. RC walls in Australia: Seismic design and detailing to AS 1170.4 and AS 3600. Australian Journal of Structural Engineering 19 (1): 67–84. doi: https://doi.org/10.1080/13287982.2017.1410309.
- Menegon, S. J., J. L. Wilson, N. T. K. Lam, and E. F. Gad. 2017. RC walls in Australia: Reconnaissance survey of industry and literature review of experimental testing. Australian Journal of Structural Engineering 18 (1): 24–40. doi: https://doi.org/10.1080/13287982.2017.1315207.
- Menegotto, M., and P. E. Pinto. 1973. Method of analysis for cyclically loaded reinforced concrete plane frames including changes in geometry and non-elastic behaviour of elements under combined normal force and bending. IABSE Symposium of Resistance and Ultimate Deformability of Structures Acted on by Well-Defined Repeated Loads, International Association of Bridge and Structural Engineering, Libson, Portugal, vol. 13, 15–22.
- Motter, C. J., E. Opabola, K. J. Elwood, and R. S. Henry. 2019. Seismic behaviour of nonductile reinforced concrete beam-column frame subassemblies. Journal of Structural Engineering 145 (12): 04019157. doi: https://doi.org/10.1061/(ASCE)ST.1943-541X.0002438.
- NZS 3101-1. 2006. Concrete structures standard—The design of concrete structures. Wellington: Standards New Zealand.
- PEER. 2013. Pacific earthquake engineering research (PEER) centre ground motion database. University of California, Berkeley, CA.
- Qiu, F. W., W. F. Li, P. Pan, and J. R. Qian. 2002. Experimental tests on reinforced concrete columns under biaxial quasi-static loading. Engineering Structures 24 (4): 419–28. doi: https://doi.org/10.1016/S0141-0296(01)00108-0.
- Raza, S., H.-H. Tsang, and J. L. Wilson. 2018. Unified models for post-peak failure drifts of normal- and high-strength RC columns. Magazine of Concrete Research 70 (21): 1081–101.
- Raza, S., M. K. I. Khan, S. J. Menegon, H.-H. Tsang, and J. L. Wilson. 2019. Strengthening and repair of reinforced concrete columns by jacketing: State-of-the-art review. Sustainability 11 (11): 3208. doi: https://doi.org/10.3390/su11113208.
- Raza, S., S. J. Menegon, H.-H. Tsang, and J. L. Wilson. 2020a. Collapse performance of limited ductile high-strength RC columns under uni-directional cyclic actions. Journal of Structural Engineering. (in press). doi: https://doi.org/10.1061/(ASCE)ST.1943-541X.0002772.
- Raza, S., S. J. Menegon, H.-H. Tsang, and J. L. Wilson. 2020b. Force-displacement behaviour of limited ductile high-strength RC columns under bidirectional earthquake actions. Engineering Structures 208: 110278. doi: https://doi.org/10.1016/j.engstruct.2020.110278.
- Rodrigues, H., A. Arêde, H. Varum, and A. G. Costa. 2013. Experimental evaluation of rectangular reinforced concrete column behaviour under biaxial cyclic loading. Earthquake Engineering and Structural Dynamics 42 (2): 239–59. doi: https://doi.org/10.1002/eqe.2205.
- Rodrigues, H., A. Furtado, and A. Arêde. 2016. Behaviour of rectangular reinforced-concrete columns under biaxial cyclic loading and variable axial loads. Journal of Structural Engineering 142 (1): 04015085. doi: https://doi.org/10.1061/(ASCE)ST.1943-541X.0001345.
- Rodrigues, H., H. Varum, A. Arêde, and A. Costa. 2012. A comparative analysis of energy dissipation and equivalent viscous damping of RC columns subjected to uniaxial and biaxial loading. Engineering Structures 35: 149–64. doi: https://doi.org/10.1016/j.engstruct.2011.11.014.
- Saadeghvaziri, M. A. 1997. Nonlinear response and modelling of RC columns subjected to varying axial load. Engineering Structures 19 (6): 417–24. doi: https://doi.org/10.1016/S0141-0296(96)00086-7.
- Saadeghvaziri, M. A., and D. A. Foutch. 1990. Behaviour of RC columns under nonproportionally varying axial load. Journal of Structural Engineering 116 (7): 1835–56. doi: https://doi.org/10.1061/(ASCE)0733-9445(1990)116:7(1835).
- Scott, B. D., R. Park, and M. J. N. Priestley. 1982. Stress–strain behaviour of concrete confined by overlapping hoops at low and high strain rates. ACI Structural Journal 79 (1): 13–27.
- Shirmohammadi, F., and A. Esmaeily. 2015. Performance of reinforced concrete columns under bi-axial lateral force/displacement and axial load. Engineering Structures 99: 63–77. doi: https://doi.org/10.1016/j.engstruct.2015.04.042.
- Standards Australia. 2018a. AS 3600: 2009Concrete structures. Sydney, NSW: Standards Australia Limited.
- Standards Australia. 2018b. Structural design actions, Part 4: Earthquake actions in Australia. AS 1170.4-2018. Sydney, NSW: Standards Australia Limited.
- Wilson, J. L., A. Wibowo, N. T. K. Lam, and E. F. Gad. 2015. Drift behaviour of lightly reinforced concrete columns and structural walls for design applications. Australian Journal of Structural Engineering 16 (1): 62–73. doi: https://doi.org/10.7158/S14-002.2015.16.1.
- Xu, G., B. Wu, D. Jia, X. Xu, and G. Yang. 2018. Quasi-static tests of RC columns under variable axial forces and rotations. Engineering Structures 162: 60–71. doi: https://doi.org/10.1016/j.engstruct.2018.02.004.