Internal Pounding between Structural Parts of Seismically Isolated Buildings

References

• Abdel Raheem, S. E., M. Y. M. Fooly, A. G. A. Abdel Shafy, A. M. Taha, Y. A. Abbas, and M. M. S. Abdel Latif. 2019. Numerical simulation of potential seismic pounding among adjacent buildings in series. Bulletin of Earthquake Engineering 17: 439–71.
   Web of Science ®Google Scholar
• Acunzo, G., A. Pagliaroli, and G. Scasserra. 2014. In-Spector: Un software di supporto alla selezione di accelerogrammi naturali spettrocompatibili per analisi geotecniche e strutturali. In Proceedings of 33rd conference of GNGTS, Bologna, Italy.
   Google Scholar
• Agarwal, V. K., J. M. Niedzwecki, and J. W. van de Lindt. 2007. Earthquake induced pounding in friction varying base isolated buildings. Engineering Structures 29: 2825–32.
   Web of Science ®Google Scholar
• Anagnostopoulos, S. A. 1988. Pounding of buildings in series during earthquakes. Earthquake Engineering & Structural Dynamics 16 (3): 443–56.
   Web of Science ®Google Scholar
• Anagnostopoulos, S. A., and K. V. Spiliopoulos. 1992. An investigation of earthquake induced pounding between adjacent buildings. Earthquake Engineering & Structural Dynamics 21 (4): 289–302.
   Web of Science ®Google Scholar
• Athanasiou, A. 2015. Dynamic identification of the Augusta hybrid base isolated building using data from full scale push and sudden release tests. Dissertation submitted in partial satisfaction of the requirements for the degree of Doctor of Philosophy in Structural and Geotechnical Engineering, University of Catania.
   Google Scholar
• Baker, J. W. 2007. Quantitative classification of near-fault ground motions using wavelet analysis. Bulletin of the Seismological Society of America 97 (5): 1486–501.
   Web of Science ®Google Scholar
• Bommer, J. J., and A. B. Acevedo. 2004. The use of real earthquake accelerograms as input to dynamic analysis. Journal of Earthquake Engineering 8 (1): 43–91.
   Web of Science ®Google Scholar
• Buckle, I. G., and J. M. Kelly. 1986. Properties of slender elastomeric isolation bearings during shake table studies of a large-scale model bridge deck. Special Publication 94:247–70.
   Google Scholar
• Charleson, A. W., and N. J. Allaf. 2012 . Costs of base-isolation and earthquake insurance in New Zealand. Procs. of the 2012 New Zealand Society for Earthquake Engineering (NZSEE) Annual Conference, Christchurch, paper 041, 1-8.
   Google Scholar
• Chioccarelli, E., and I. Iervolino. 2010. Near-source seismic demand and pulse-like records: A discussion for L’Aquila earthquake. Earthquake Engineering and Structural Dynamics 39 (9): 1039–62.
   Web of Science ®Google Scholar
• Constantinou, M., A. Mokha, and A. Reinhorn. 1990. Teflon bearings in base isolation. II: Modeling. Journal of Structural Engineering 116 (2): 455–74.
   Web of Science ®Google Scholar
• D’Amato, M., R. Laguardia, and R. Gigliotti. 2020. Seismic retrofit of an existing rc building with isolation devices applied at base. Frontiers in Built Environment 6 (article): 82.
   Google Scholar
• EC8 (Eurocode 8). 2004. Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings. C.E.N. European Committee for Standardization.
   Google Scholar
• FEMA (Federal Emergency Management Agency). 2009. NEHRP Recommended Seismic Provisions: Design Examples. P-751. National Earthquake Hazards Reduction Program.
   Google Scholar
• FIP Industriale S.r.l. Elastomeric isolators - Series SI. 2018. Accessed May 5, 2020. https://www.fipindustriale.it/index.php?area=106&menu=67&page=167.
   Google Scholar
• Gandelli, E., M. Penati, V. Quaglini, G. Lomiento, E. Miglio, and G. M. Benzoni. 2018. A novel OpenSees element for single curved surface sliding isolators. Soil Dynamics and Earthquake Engineering. doi: 10.1016/j.soildyn.2018.01.044ssss.
   Web of Science ®Google Scholar
• Gesualdi, G., D. Cardone, and G. Rosa. 2018. Finite element model updating of base-isolated buildings using experimental results of in-situ tests. Soil Dynamics and Earthquake Engineering. doi: 10.1016/j.soildyn.2018.02.003.
   Web of Science ®Google Scholar
• Guo, A., L. Cui, and H. Li. 2012. Impact stiffness of the contact-element models for the pounding analysis of highway bridges: Experimental evaluation. Journal of Earthquake Engineering 16 (8): 1132–60.
   Web of Science ®Google Scholar
• Han, X., C. A. Kelleher, G. P. Warn, and T. Wagener. 2013. Identification of the controlling mechanism for predicting critical loads in elastomeric bearings. Journal of Structural Engineering 139: 04013016-1-04013016-13.
   Web of Science ®Google Scholar
• Iervolino, I., C. Galasso, and E. Cosenza. 2009. REXEL: Computer aided record selection for code-based seismic structural analysis. Bulletin of Earthquake Engineering 8 (2): 339–62.
   Web of Science ®Google Scholar
• Iizuka, M. 2000. A macroscopic model for predicting large-deformation behaviors of laminated rubber bearings. Engineering Structures 22 (4): 323–34.
   Web of Science ®Google Scholar
• Ishii, K., M. Kikuchi, T. Nishimura, and C. J. Black. 2017. Coupling behavior of shear deformation and end rotation of elastomeric seismic isolation bearings. Earthquake Engineering & Structural Dynamics 46 (4): 677–94.
   Web of Science ®Google Scholar
• Ismail, M. 2014. An isolation system for limited seismic gaps in near-fault zones. Earthquake Engineering & Structural Dynamics 44 (7): 1115–37.
   Web of Science ®Google Scholar
• Jankowski, R. 2005. Non-linear viscoelastic modelling of earthquake-induced structural pounding. Earthquake Engineering & Structural Dynamics 34 (6): 595–611.
   Web of Science ®Google Scholar
• Kikuchi, M., T. Nakamura, and I. D. Aiken. 2010. Three-dimensional analysis for square seismic isolation bearings under large shear deformations and high axial loads. Earthquake Engineering & Structural Dynamics 39 (13): 1513–31.
   Web of Science ®Google Scholar
• Komodromos, P., P. Polycarpou, L. Papaloizou, and M. C. Phocas. 2007. Response of seismically isolated buildings considering poundings. Earthquake Engineering and Structural Dynamics 36: 1605–22.
   Web of Science ®Google Scholar
• Kumar, M., A. S. Whittaker, and M. C. Constantinou. 2014. An advanced numerical model of elastomeric seismic isolation bearings. Earthquake Engineering & Structural Dynamics 43: 1955–74.
   Web of Science ®Google Scholar
• Licari, M., S. Sorace, and G. Terenzi. 2015. Nonlinear modeling and mitigation of seismic pounding between r/c frame buildings. Journal of Earthquake Engineering 19: 431–60.
   Web of Science ®Google Scholar
• Malhotra, P. K. 1997. Dynamics of seismic impacts in base-isolated buildings. Earthquake Engineering & Structural Dynamics 26: 797–813.
   Web of Science ®Google Scholar
• Markou, A. A., N. D. Oliveto, and A. Athanasiou. 2017. Modeling of high damping rubber bearings. In Dynamic response of infrastructure to environmentally induced loads, Vol. 2, A. Sextos and G. Manolis, ed., 115–38. Cham: Springer.
   Google Scholar
• Masroor, A., and G. Mosqueda. 2012. Experimental simulation of base-isolated buildings pounding against moat wall and effects on superstructure response. Earthquake Engineering & Structural Dynamics 41 (14): 2093–109.
   Web of Science ®Google Scholar
• Matsagar, V. A., and R. S. Jangid. 2003. Seismic response of base-isolated structures during impact with adjacent structures. Engineering Structures 25 (10): 1311–23.
   Web of Science ®Google Scholar
• Mazza, F. 2014. Modelling and nonlinear static analysis of reinforced concrete framed buildings irregular in plan. Engineering Structures 80: 98–108.
   Web of Science ®Google Scholar
• Mazza, F. 2017. Lateral-torsional response of base-isolated buildings with curved surface sliding system subjected to near-fault earthquakes. Mechanical Systems and Signal Processing 92: 64–85.
   Web of Science ®Google Scholar
• Mazza, F. 2018a. Advanced shear and axial laws of bearings in the nonlinear seismic analysis of r.c. buildings. Paper presented at the Eleventh U.S. National Conference on Earthquake Engineering, Los Angeles, California, June 25-29.
   Google Scholar
• Mazza, F. 2018b. Seismic demand of base-isolated irregular structures subjected to pulse-type earthquakes. Soil Dynamics and Earthquake Engineering 108: 111–29.
   Web of Science ®Google Scholar
• Mazza, F., and A. Vulcano. 2012. Effects of the near-fault ground motions on the nonlinear dynamic response of base-isolated r.c. framed buildings. Earthquake Engineering and Structural Dynamics 41 (2): 211–32.
   Web of Science ®Google Scholar
• Mazza, F., and M. Mazza. 2010. Nonlinear analysis of spatial framed structures by a lumped plasticity model based on the Haar–Kàrmàn principle. Computational Mechanics 45 (6): 647–64.
   Web of Science ®Google Scholar
• Mazza, F., and M. Mazza. 2012. Nonlinear modeling and analysis of r.c. framed buildings located in a near-fault area. The Open Construction & Building Technology Journal 6: 346–54.
   Google Scholar
• Mazza, F., and R. Labernarda. 2017. Structural and non-structural intensity measures for the assessment of base-isolated structures subjected to pulse-like near-fault earthquakes. Soil Dynamics and Earthquake Engineering 96: 115–27.
   Web of Science ®Google Scholar
• Nagarajaiah, S., and K. Ferrell. 1999. Stability of elastomeric seismic isolation bearings. Journal of Structural Engineering 125 (9): 946–54.
   Web of Science ®Google Scholar
• Nagarajaiah, S., and X. Sun. 2001. Base-isolated FCC building: Impact response in Northridge earthquake. Journal of Structural Engineering 127 (9): 1063–75.
   Web of Science ®Google Scholar
• NTC08 2008. Technical Regulations for the Constructions. Italian Ministry of the Infrastructures. D.M. 14- 01-2008and C.M. 2-2-2009.
   Google Scholar
• NTC18 2018. Updating of the Technical Regulations for the Constructions. Italian Ministry of the Infrastructures. D.M. 17- 01-2018.
   Google Scholar
• NZSEE 2019. Guideline for the Design of Seismic Isolation Systems for Buildings. New Zealand Society for Earthquake Engineering.
   Google Scholar
• Oliveto, G., A. Athanasiou, and M. Granata. 2013. Blind simulation of full scale free vibration tests on a three story base isolated building. In Proceedings of the 10th International Conference on Urban Earthquake Engineering, Tokyo, Japan, March 1- 2.
   Google Scholar
• Pant, D. R., and A. C. Wijeyewickrema. 2012. Structural performance of a base-isolated reinforced concrete building subjected to seismic pounding. Earthquake Engineering & Structural Dynamics 41 (12): 1709–16.
   Web of Science ®Google Scholar
• Pant, D. R., and A. C. Wijeyewickrema. 2013. Influence of near-fault ground motions on the response of base-isolated reinforced concrete buildings considering seismic pounding. Advances in Structural Engineering 16 (12): 1973–88.
   Web of Science ®Google Scholar
• PEER (Pacific Earthquake Engineering Research Center database). 2014. Accessed May 5, 2020. http://ngawest2.berkeley.edu.
   Google Scholar
• Polycarpou, P. C., and P. Komodromos. 2010. On poundings of a seismically isolated building with adjacent structures during strong earthquakes. Earthquake Engineering & Structural Dynamics 39: 933–40.
   Web of Science ®Google Scholar
• Quaglini, V., M. Bocciarelli, E. Gandelli, and P. Dubini. 2014. Heating in sliding bearings for seismic isolation. Journal of Earthquake Engineering 18: 1198–216.
   Web of Science ®Google Scholar
• Rastgoo Moghadam, S., and D. Konstantinidis. 2017. Simple mechanical models for the horizontal behavior of elastomeric bearings including the effect of support rotation. Engineering Structures 150: 996–1012.
   Web of Science ®Google Scholar
• Rawlinson, T. A., J. D. Marshall, K. L. Ryan, and H. Zargar. 2015. Development and experimental evaluation of a passive gap damper device to prevent pounding in base-isolated structures. Earthquake Engineering & Structural Dynamics 44 (11): 1661–75.
   Web of Science ®Google Scholar
• Reyes, J. C., and E. Kalkan. 2012. How many records should be used in an ASCE/SEI-7 ground motion scaling procedure? Earthquake Spectra 28 (3): 1223–42.
   Web of Science ®Google Scholar
• Shahi, S. K., and J. W. Baker. 2014. An efficient algorithm to identify strong-velocity pulses in multicomponent ground motions. Bulletin of the Seismological Society of America 104 (5): 2456–66.
   Web of Science ®Google Scholar
• Sorace, S., and G. Terenzi. 2014. Analysis, design, and construction of a base-isolated multiple building structure. Advances in Civil Engineering, Article 585429: 1–13.
   Google Scholar
• Vemuru, V. S. M., S. Nagarajaiah, A. Masroor, and G. Mosqueda. 2014. Dynamic lateral stability of elastomeric seismic isolation bearings. Journal of Structural Engineering 140 (8): A4014014.
   Web of Science ®Google Scholar
• Vemuru, V. S. M., S. Nagarajaiah, and G. Mosqueda. 2016. Coupled horizontal–vertical stability of bearings under dynamic loading. Earthquake Engineering & Structural Dynamics 45: 913–34.
   Web of Science ®Google Scholar
• Warn, G. P., A. S. Whittaker, and M. C. Constantinou. 2007. Vertical stiffness of elastomeric and lead–rubber seismic isolation bearings. Journal of Structural Engineering 133: 1227–36.
   Web of Science ®Google Scholar
• Weisman, J., and G. P. Warn. 2012. Stability of elastomeric and lead-rubber seismic isolation bearings. Journal of Structural Engineering 138 (2): 215–23.
   Web of Science ®Google Scholar
• Yamamoto, S., M. Kikuchi, M. Ueda, and I. D. Aiken. 2009. A mechanical model for elastomeric seismic isolation bearings including the influence of axial load. Earthquake Engineering & Structural Dynamics 38 (2): 157–80.
   Web of Science ®Google Scholar
• Zhu, P., M. Abe, and Y. Fujino. 2002. Modelling three-dimensional non-linear seismic performance of elevated bridges with emphasis on pounding of girders. Earthquake Engineering & Structural Dynamics 31 (11): 1891–913.
   Web of Science ®Google Scholar