Experimental Analysis and Theoretical Modelling of Polyurethane Effects on 1D Wave Propagation through Sand-Polyurethane Specimens

References

• Ahmed, M., S. H. Lodi, and M. M. Rafi. 2019. Probabilistic seismic hazard analysis based zoning map of Pakistan. Journal of Earthquake Engineering 1–36. doi: 10.1080/13632469.2019.1684401.
   Web of Science ®Google Scholar
• Anastasiadis, A., K. Senetakis, and K. Pitilakis. 2012. Small-strain shear modulus and damping ratio of sand/rubber and gravel/rubber mixtures. Geotechnical and Geological Engineering 30 (2): 363–82. doi: 10.1007/s10706-011-9473-2.
   Google Scholar
• Banović, I., J. Radnić, and N. Grgić. 2018. The use of limestone sand for the seismic base isolation of structures. Advances in Civil Engineering 2018: 1–12. doi: 10.1155/2018/9734283.
   Web of Science ®Google Scholar
• Banović, I., J. Radnić, and N. Grgić. 2019. Geotechnical seismic isolation system based on sliding mechanism using stone pebble layer: Shake-table experiments. Shock and Vibration 2019: 1–26. doi: 10.1155/2019/9346232.
   Web of Science ®Google Scholar
• Barone, S., G. M. Calvi, and A. Pavese. 2019. Experimental dynamic response of spherical friction-based isolation devices. Journal of Earthquake Engineering 23 (9): 1465–84. doi: 10.1080/13632469.2017.1387201.
   Web of Science ®Google Scholar
• Bayer, O. 1947. Polyurethanes. Modern. Plastics 24: 149–52.
   Google Scholar
• Berardengo, M., G. Busca, S. Grossi, S. Manzoni, and M. Vanali. 2017. The monitoring of Palazzo Lombardia in Milan. Shock and Vibration 2017 (3): 1–13. doi: 10.1155/2017/8932149.
   Google Scholar
• Beschi, C., A. Meda, and P. Riva. 2011. Column and joint retrofitting with high performance fiber reinforced concrete jacketing. Journal of Earthquake Engineering 15 (7): 989–1014. doi: 10.1080/13632469.2011.552167.
   Web of Science ®Google Scholar
• Beskos, D., B. Dasgupta, and I. G. Vardoulakis. 1986. Vibration isolation using open and filled trenches. Computational Mechanics 1: 43–63. doi: 10.1007/BF00298637.
   Google Scholar
• Brandt, A. 2011. Noise and vibration analysis: Signal analysis and experimenal procedures. New York: John Wiley & Sons, Inc.
   Google Scholar
• Brandt, A., M. Berardengo, S. Manzoni, and A. Cigada. 2017. Scaling of mode shapes from operational modal analysis using harmonic forces. Journal of Sound and Vibration 407: 128–43. doi: 10.1016/j.jsv.2017.06.033.
   Web of Science ®Google Scholar
• Brandt, A., M. Berardengo, S. Manzoni, M. Vanali, and A. Cigada. 2019. Global scaling of operational modal analysis modes with the OMAH method. Mechanical Systems and Signal Processing 117: 52–64. doi: 10.1016/j.ymssp.2018.07.017.
   Web of Science ®Google Scholar
• Brunet, S., J. C. de la Llera, and E. Kausel. 2016. Non-linear modeling of seismic isolation systems made of recycled tire-rubber. Soil Dynamics and Earthquake Engineering 85: 134–45. doi: 10.1016/j.soildyn.2016.03.019.
   Web of Science ®Google Scholar
• Buzzi, O., S. Fityus, Y. Sasaki, and S. Sloan. 2008. Structure and properties of expanding polyurethane foam in the context of foundation remediation in expansive soil. Mechanics of Materials 40 (12): 1012–21. doi: 10.1016/j.mechmat.2008.07.002.
   Web of Science ®Google Scholar
• Buzzi, O., S. Fityus, Y. Sasaki, and S. Sloan. 2010. Use of expanding polyurethane resin to remediate expansive soil foundation. Canadian Geotechnical Journal 47 (6): 623–34. doi: 10.1139/T09-132.
   Web of Science ®Google Scholar
• Calvi, G. M. 2013. Choices and criteria for seismic strengthening. Journal of Earthquake Engineering 17 (6): 769–802. doi: 10.1080/13632469.2013.781556.
   Web of Science ®Google Scholar
• Castelli, F., A. Cavallaro, A. Ferrero, S. Grasso, V. Lentini, and M. R. Massimino. 2018. Static and dynamic properties of soils in Catania (Italy). Annals of Geophysics 61 (2): SE221. doi: 10.4401/ag-7706.
   Web of Science ®Google Scholar
• Castelli, F., V. Lentini, and S. Grasso. 2017. Recent developments for the seismic risk assessment. Bulletin of Earthquake Engineering 15 (12): 5093–117. doi: 10.1007/s10518-017-0163-1.
   Web of Science ®Google Scholar
• Cavallaro, A., F. Castelli, A. Ferraro, S. Grasso, and V. Lentini. 2018. Site response analysis for the seismic improvement of a historical and monumental building: The case of Augusta Hangar. Bulletin of Engineering Geology and the Environment 77 (3): 1217–48. doi: 10.1007/s10064-017-1170-9.
   Web of Science ®Google Scholar
• Chopra, A. K. 2001. Dynamics of structures theory and applications to earthquake engineering. New Jersey: Prentice Hall.
   Google Scholar
• Clemente, P. 2017. Seismic isolation: Past, present and the importance of SHM for the future. Journal of Civil Structural Health Monitoring 7: 217–31. doi: 10.1007/s13349-017-0219-6.
   Web of Science ®Google Scholar
• De Domenico, D., E. Gandelli, and V. Quaglini. 2020. Effective base isolation combining low-friction curved surface sliders and hysteretic gap dampers. Soil Dynamics and Earthquake Engineering 130: 105989. doi: 10.1016/j.soildyn.2019.105989.
   Web of Science ®Google Scholar
• Dhanya, J. S., A. Boominathan, and S. Banerjee. 2020. Response of low-rise building with geotechnical seismic isolation system. Soil Dynamics and Earthquake Engineering 136: 106187. doi: 10.1016/j.soildyn.2020.106187.
   Web of Science ®Google Scholar
• Ebrahimian, H., F. Jalayer, G. Forte, V. Convertito, V. Licata, A. d’Onofrio, A. Santo, F. Silvestri, and G. Manfredi. 2019. Site-specific probabilistic seismic hazard analysis for the western area of Naples, Italy. Bulletin of Earthquake Engineering 17: 4743–96. doi: 10.1007/s10518-019-00678-1.
   Web of Science ®Google Scholar
• Eltahawy, W., K. L. Ryan, S. Cesmeci, and F. Gordaninejad. 2018. Parameters affecting dynamics of three-dimensional seismic isolation. Journal of Earthquake Engineering. doi: 10.1080/13632469.2018.1537902.
   Google Scholar
• Eröz, M., and R. DesRoches. 2013. A comparative assessment of sliding and elastomeric seismic isolation in a typical multi-span bridge. Journal of Earthquake Engineering 17 (5): 637–57. doi: 10.1080/13632469.2013.771589.
   Web of Science ®Google Scholar
• Ewins, D. J. 2000. Modal testing: Theory, practise and application. 2nd ed. New York: John Wiley & Sons, Inc.
   Google Scholar
• Flora, A., D. Lombardi, V. Nappa, and E. Bilotta. 2018. Numerical analyses of the effectiveness of soft barriers into the soil for the mitigation of seismic risk. Journal of Earthquake Engineering 22 (1): 63–93. doi: 10.1080/13632469.2016.1217802.
   Web of Science ®Google Scholar
• Forcellini, D. 2017. Assessment on geotechnical seismic isolation (GSI) on bridge configurations. Innovative Infrastructure Solutions 2 (9). doi: 10.1007/s41062-017-0057-8.
   Google Scholar
• Furukawa, S., E. Sato, Y. Shi, T. Becker, and M. Nakashima. 2013. Full-scale shaking table test of a base-isolated medical facility subjected to vertical motions. Earthquake Engineering and Structural Dynamics 42 (13): 1931–49. doi: 10.1002/eqe.2305.
   Web of Science ®Google Scholar
• Gatto, M. P. A., V. Lentini, F. Castelli, L. Montrasio, and D. Grassi. 2021. The use of polyurethane injection as a geotechnical seismic isolation method in large-scale applications: A numerical study. Geosciences 11:201. (In press). doi:10.3390/geosciences11050201.
   Web of Science ®Google Scholar
• Gatto, M. P. A., and L. Montrasio. 2018. Wave propagation in sandy soil: An experimental and numerical model. Proceeding of the 16th European conference on earthquake engineering, Thessaloniki, Greece.
   Google Scholar
• Gatto, M. P. A., L. Montrasio, M. Berardengo, and M. Vanali. 2020. Experimental analysis of the effects of a polyurethane foam on geotechnical seismic isolation. Journal of Earthquake Engineering 1–22. doi: 10.1080/13632469.2020.1779871.
   Web of Science ®Google Scholar
• Gatto, M. P. A., L. Montrasio, A. Tsinaris, D. Pitilakis, and A. Anastasiadis. 2019. The dynamic behaviour of polyurethane foams in geotechnical conditions. Proceeding of the 7th international conference on earthquake geotechnical engineering, Rome, Italy.
   Google Scholar
• Giardini, D., L. Danciu, M. Erdik, K. Şeşetyan, M. B. Demircioğlu Tümsa, S. Akkar, L. Gülen, and M. Zare. 2018. Seismic hazard map of the Middle East. Bulletin of Earthquake Engineering 16: 3567–70. doi: 10.1007/s10518-018-0347-3.
   Web of Science ®Google Scholar
• Kuvat, A., and E. Sadoglu. 2020. Dynamic properties of sand-bitumen mixtures as a geotechnical seismic isolation material. Soil Dynamics and Earthquake Engineering 132. doi: 10.1016/j.soildyn.2020.106043.
   Web of Science ®Google Scholar
• Lanzano, G., L. Luzi, V. D’Amico, F. Pacor, C. Meletti, W. Marzocchi, R. Rotondi, and E. Varini. 2020. Ground motion models for the new seismic hazard model of Italy (MPS19): Selection for active shallow crustal regions and subduction zones. Bulletin of Earthquake Engineering 18: 3487–516. doi: 10.1007/s10518-020-00850-y.
   Web of Science ®Google Scholar
• Lat, D. C., N. Ali, I. B. M. Jais, N. Z. M. Yunus, R. Razali, and A. R. A. Talip. 2020. A review of polyurethane as a ground improvement method. Malaysian Journal of Fundamental and Applied Sciences 16 (1): 70–74. doi: 10.11113/mjfas.v16n1.1235.
   Web of Science ®Google Scholar
• Lat, D. C., I. B. M. Jais, K. T. Mohamed, and R. Razali. 2015. Performance comparison between polyurethane injection pile and slab system against lightweight concrete as a ground improvement using finite element analysis. Journal of Applied Sciences Research 11 (20): 11–16.
   Google Scholar
• Li, X., C. Zhai, W. Wen, and L. Xie. 2018. Ground motion prediction model for horizontal PGA, 5% damped response spectrum in Sichuan-Yunnan Region of China. Journal of Earthquake Engineering. doi: 10.1080/13632469.2018.1485600.
   Web of Science ®Google Scholar
• Li, Y., Y. Sanada, K. Maekawa, H. Katayama, H. Choi, K. Matsukawa, and S. Takahashi. 2019. Seismic strengthening and rehabilitation of RC frame structures with weak beam-column joints by installing wing walls. Bulletin of Earthquake Engineering 17: 2533–67. doi: 10.1007/s10518-018-00547-3.
   Web of Science ®Google Scholar
• Mashal, M., A. Palermo, and G. Keats. 2019. Innovative metallic dissipaters for earthquake protection of structural and non-structural components. Soil Dynamics and Earthquake Engineering 116: 31–42. doi: 10.1016/j.soildyn.2018.10.002.
   Web of Science ®Google Scholar
• Mazza, F., and D. Pucci. 2016. Static vulnerability of an existing r.c. structure and seismic retrofitting by CFRP and base-isolation: A case study. Soil Dynamics and Earthquake Engineering 84: 1–12. doi: 10.1016/j.soildyn.2016.01.010.
   Web of Science ®Google Scholar
• Meneghetti, U., A. Maggiore,and, and E. Funaioli. 2015. Lezioni di meccanica applicata alle macchine. Vol. 3. Bologna: Pàtron Editore Srl.
   Google Scholar
• Montaldo, V., C. Meletti, F. Martinelli, M. Stucchi, and M. Locati. 2007. On-line seismic hazard data for the New Italian building code. Journal of Earthquake Engineering 11 (sup1): 119–32. doi: 10.1080/13632460701280146.
   Web of Science ®Google Scholar
• Montrasio, L., and M. P. A. Gatto. 2016. Experimental analyses on cellular polymers for geotechnical applications. Proceeding of VI Italian conference of researchers in geotechnical engineering, Bologna, Italy.
   Google Scholar
• Montrasio, L., and M. P. A. Gatto. 2017. Experimental analyses on cellular polymers in different forms for geotechnical applications. Proceedings of the 19th International Conference on Soil Mechanics and Geotechnical Engineering, Seoul.
   Google Scholar
• Murillo, C., L. Thorel, and B. Caicedo. 2009. Ground vibration isolation with geofoam barriers: Centrifuge modeling. Geotextiles and Geomembranes 27 (6): 423–34. doi: 10.1016/j.geotexmem.2009.03.006.
   Web of Science ®Google Scholar
• Nowamooz, H. 2016. Resin injection in clays with high plasticity. Comptes rendus Mécanique 344 (11): 797–806. doi: 10.1016/j.crme.2016.09.001.
   Web of Science ®Google Scholar
• Pardalopoulos, S. I., S. J. Pantazopoulou, and G. E. Thermou. 2020. Seismic rehabilitation of substandard R.C. Buildings with masonry infills. Journal of Earthquake Engineering 24 (2): 298–327. doi: 10.1080/13632469.2018.1453397.
   Web of Science ®Google Scholar
• Patil, S. J., G. R. Reddy, R. Shivshankar, R. Babu, B. R. Jayalekshmi, and B. Kumar. 2016. Seismic base isolation for structures using river sand. Earthquakes and Structures 10 (4): 829–47. doi: 10.12989/eas.2016.10.4.829.
   Web of Science ®Google Scholar
• Pourmasoud, M. M., J. B. P. Lim, I. Hajirasouliha, and D. McCrum. 2020. Multi-directional base isolation system for coupled horizontal and vertical seismic excitations. Journal of Earthquake Engineering 1–26. doi: 10.1080/13632469.2020.1713925.
   Web of Science ®Google Scholar
• Senaldi, I., G. Magenes, A. Penna, A. Galasco, and M. Rota. 2014. The effect of stiffened floor and roof diaphragms on the experimental seismic response of a full-scale unreinforced stone masonry building. Journal of Earthquake Engineering 18 (3): 407–43. doi: 10.1080/13632469.2013.876946.
   Web of Science ®Google Scholar
• Shreyasvi, C., K. Venkataramana, and S. Chopra. 2019. Local site effect incorporation in probabilistic seismic hazard analysis – A case study from southern peninsular India, an intraplate region. Soil Dynamics and Earthquake Engineering 12: 381–98. doi: 10.1016/j.soildyn.2019.04.035.
   Google Scholar
• Tsang, H. H. 2009. Geotechnical seismic isolation. In Earthquake engineering: New research, 55–87. New York, U.S.: Nova Science Publishers, Inc.
   Google Scholar
• Tsang, H. H., S. H. Lo, X. Xu, and M. Neaz Sheikh. 2012. Seismic isolation for low-to-medium-rise buildings using granulated rubber–soil mixtures: Numerical study. Earthquake Engineering and Structural Dynamics 41 (14): 2009–24. doi: 10.1002/eqe.2171.
   Web of Science ®Google Scholar
• Tsang, H. H., and K. Pitilakis. 2019. Mechanism of geotechnical seismic isolation system: Analytical modelling. Soil Dynamics and Earthquake Engineering 122: 171–84. doi: 10.1016/j.soildyn.2019.03.037.
   Web of Science ®Google Scholar
• Yegian, M. K., and M. Catan. 2004. Soil isolation for seismic protection using a smooth synthetic liner. Journal of Geotechnical and Geoenvironmental Engineering 130 (11): 1131–39. doi: 10.1061/(ASCE)1090-0241(2004)130:11(1131).
   Web of Science ®Google Scholar
• Yegian, M. K., and U. Kadakal. 2004. Foundation isolation for seismic protection using a smooth synthetic liner. Journal of Geotechnical and Geoenvironmental Engineering 130 (11): 1121–30. doi: 10.1061/(ASCE)1090-0241(2004)130:11(1121).
   Web of Science ®Google Scholar
• Zimmaro, P., and J. P. Stewart. 2017. Site-specific seismic hazard analysis for Calabrian dam site using regionally customized seismic source and ground motion models. Soil Dynamics and Earthquake Engineering 94: 179–92. doi: 10.1016/j.soildyn.2017.01.014.
   Web of Science ®Google Scholar