References
- J. Hutt, M. Easton, L. Hogan and D. St John, “The effect of nucleant particles and alloy chemistry on the grain structure of aluminium castings”, Proc. 4th Decennial International Conference on Solidification Processing (SP97), 1997, University of Sheffield, UK, pp. 268–272.
- G. K. Sigworth, “Theoretical and practical aspects of the modification of Al-Si alloys”, AFS Transactions, 1983, 91, pp. 7–16.
- D. Vorren, J. E. Evensen and T. B. Pederson, “Micro-structure and mechanical properties of AlSi(Mg) casting alloys”, AFS Transactions, 1984, 92, pp. 459–466.
- S. Murali, K. S. Raman and K. S. S. Murthy, ‘Effect of magnesium, iron (impurity) and solidification rates on the fracture toughness of Al-7Si-0.3Mg casting alloy”, Materials Science and Engineering, 1992, A151, pp. 1–10.
- J. Campbell, “The origin of porosity in castings”, Proc. 4th Asian Foundry Congress, 1996, Gold Coast, Queensland: Australian Foundry Institute, pp. 33–50.
- J. A. Taylor, “Metal-related castability effects in aluminium foundry alloys”, Cast Metals, 1995, 8 (4), pp. 225–252.
- M. C. Flemings, T. Z. Kattamis and B. P. Bardes, “Dendrite arm spacing in aluminum alloys”, AFS Transactions, 1991, 99, pp. 501–506.
- D. Apelian, S. Shivkumar and G. Sigworth, “Fundamental aspects of heat treatment of cast Al-Si-Mg alloys”, AFS Transactions, 1989, 97, pp. 727–742.
- J. A. Taylor, D. H. St John, J. Barresi and M. J. Couper, “The solution treatment of Al-Si-Mg casting alloys: Part 2—Solid solution composition”, Aluminum Transactions, paper prepared for submission.
- G. A. Edwards, K. Stiller, G. L. Dunlop and M. J. Couper, “The precipitation sequence in Al-Mg-Si alloys”, Acta Materialia, 1998, 46 (11), pp. 3893–3904.
- C. H. Caceres, C. J. Davidson, J.R. Griffiths, L. M. Hogan and Q. G. Wang, “Hypoeutectic Al-Si-Mg foundry alloys”, Materials Forum, 1997, 21, pp. 27–43.
- J. A. Taylor, D. H. St John, L. H. Zheng, G. A. Edwards and M. J. Couper, “The solution treatment of Al-Si-Mg casting alloys: Part I—Intermetallic phases”, Aluminum Transactions, paper prepared for submission.
- G. E. Nagel, Jr., J. P. Mouret and J. Dubruelh, “A357 type alloy with improved properties”, AFS Transactions, 1983, 91, pp. 157–160.
- S. Shivkumar, S. Ricci, Jr, B. Steenhoff, D. Apelian and G. Sigworth, “An experimental study to optimize the heat treatment of A356 alloy”, AFS Transactions, 1989, 97, pp. 791–810.
- M. Drouzy, S. Jacob and M. Richard, “Interpretation of tensile results by means of quality index and probable yield strength”, AFS Inter. Cast Metals Journal, 1980, 5, pp. 43–50.
- C. H. Caceres, “A rationale for the quality index of Al-Si-Mg casting alloys”, Inter. J. Cast Metals Research, 1998. 10(5), pp. 293–299.
- C. H. Caceres and J. R. Griffiths, “Damage by the cracking of silicon particles in an Al-7Si-0.4Mg casting alloy”, Acta Materialia, 1996, 44 (1), pp. 25–33.
- J. Barresi, M. Kerr, H. Wang and M. J. Couper, “Effect of magnesium and iron levels on the mechanical properties of Al-7Si-Mg foundry alloys”, presented at 104th AFS Casting Congress, 8–11th April 2000, Pittsburgh, PA, USA, Paper 00–117.
- C. H. Caceres and J. Barresi, “Selection of temper and Mg content to optimise the quality index of Al-7Si-Mg casting alloys”, Inter. J. Cast Metals Research, 2000, 12 (6), pp. 377–384.
- U.S. Patent 5297611, Comalco Aluminium Ltd., 03/29/94, “Casting of metal objects”.
- C. H. Caceres, C. J. Davidson, J. R. Griffiths and Q. C. Wang, “The effect of Mg on the microstructure and mechanical behavior of Al-Si-Mg casting alloys”, Metallurgical and Materials Transactions, 1999, 30A (10), pp. 2611–2618.
- A. Couture, “Iron in aluminium casting alloys—a literature survey”, AFS Inter. Cast Metals Journal, 1981, 6 (4), pp. 9–17.
- G. W. Dieter, Mechanical Metallurgy, 3rd edition, 1986, New York: McGraw-Hill Inc.
- J. A. Taylor, D. H. St John, J. Barresi and M. J. Couper, “Influence of Mg content on the microstructure and solid solution chemistry of Al-7%Si-Mg casting alloys during solution treatment”, Proc. 7th International Conference on Aluminum Alloys: ICAA7, 9–14th April 2000, Charlottesville, VA, USA, pp. 277–282.