References
- L.J.D. Sully, “The thermal interface between castings and moulds”, AFS Trans., 1976, p. 735–744.
- K. Ho, R.D. Pehlke, “Metal-mould interfacial heat transfer”, Met. Trans. B, 1985, p. 585–594.
- K. Ho, R.D. Pehlke, “Transient methods for determination of metal-mould interfacial heat transfer”, AFS Trans., 1983, p. 689–698.
- J. Isaac, G.P. Reddy, and G.K. Sharma, “Variations of heat transfer coefficients during solidification of castings in metallic moulds”, The British Foundryman, 1985, p. 465–468.
- W.D. Griffiths. “The heat transfer coefficient during the unidirectional solidification of an Al-Si alloy casting”, Metallurgical and materials transactions B, 1999, volume 30 B, p. 473–482.
- K.N. Prabhu, and J. Campbell, “Investigation of casting/chill interfacial heat transfer during solidification of Al-11%Si alloy by inverse modelling and real time X-ray imaging”, Int. J. Cast Metals Res., 1999, vol. 12, p. 137–143.
- B.P. Winter, R.D. Pehlke, “Volumetric shrinkage and gap formation during solidification of copper-base alloys”, AFS Trans., 1983, p. 81–88.
- K. Ho, R.D. Pehlke, “Mechanisms of heat transfer at a metal-mold interface”, AFS Trans., 1984, p. 587–598.
- J.G. Henzel, Jr., J. Keverian, “Gap formation in permanent mold castings”, Transactions of the American Foundrymen's Society, 1960, vol. 68, p. 373–379.
- Y. Nishida, W. Droste, S. Engler, “The air gap formation process at the casting-mould interface and the heat transfer mechanism through the gap”, Met. Trans. B, 1986, p. 833–844.
- M. Bellet, F. Decultieux, F. Bay, C. Levaillant, J-L. Chenot, P. Schmidt, and I.L. Svensson, “Thermomechanics of the cooling stage in casting processes: three dimensional finite element analysis and experimental validation”, Metallurgical and Materials Transactions B, 1996, vol. 27 B, p. 81–99.
- F. Decultieux, M. Menai, F. Bay, C. Levaillant, P. Schmidt, I. L. Svensson, M. Bellet, ASM International, Modelling in Welding, Hot Powder Forming and Casting, USA, 1997, pp. 131–158.
- M. Trovant, S.A. Argyropoulos, “The implementation of a mathematical model to characterize mould metal interface effects in metal casting”, Canadian Metallurgical Quarterly, 1998, vol. 37, No. 3–4, p. 185–196.
- O. Richmond, and R. H. Tien, “Theory of thermal stresses and air-gap formation during the early stages of solidification in a rectangular mould”, J. Mech. Solids, 1971, vol. 19, p. 273–284.
- T. El-Benawy, H. Fredriksson, “Solidification mechanism of unmodified and strontium modified Al-Si alloys”, Materials Transactions, JIM, 2000 vol. 41, no. 4.
- C-M. Raihle, H. Fredriksson, and S. Östlund, “Modelling of heat flow and solidification process in a strip caster”, Modelling of Casting, Welding and Advanced Solidification Processes VII; London, England, Sept 10–15 1995, 817–824.
- M. Haddad-Sabzever, H. Fredriksson; “Rapid solidification of Cu-base alloys”, TRITA-MG-AVH-001, Royal Institute of Technology, 1994.
- J. Mahmoudi, H. Fredriksson, “Thermal analysis of copper-tin alloys during rapid solidification”, Journal of Materials Science, 2000 vol. 35, p. 4977–4987.
- S. Berg, J. Dahlström, and H. Fredriksson, “The influence of lattice defects on the solidification process of Al-Cu alloys”, ISIJ International, 1995, vol. 35, No. 7, p. 876–885.
- R. O. Simmons, R. W. Balluffi, “Measurements of equilibrium vacancy concentrations in aluminium”, Physical Review 117, 1960, 52.
- K. Wang, R.R. Reeber; “The perfect crystal, thermal vacancies and the thermal expansion coefficient of aluminium”, Philosophical Magazine A, 2000, vol. 80, no. 7, pp. 1629–1643.
- P. Schmidt, I.L. Svensson, “Heat transfer and air gap formation in permanent mould casting of aluminium alloys”, Trita-Mac-0541, 1994, The Royal Institute of Technology, Sweden.
- D. Gunasegaram, D. Celentano and T. Nguyen; “The effect of cooling a permanent composite mould on airgap formation and heat transfer”, Sensors and Modeling in Materials Processing: Techniques and Applications, The Minerals, Metals & Materials Society, 1997.
- T. Nguyen, D. Gunasegaram, L. Luo, and R. Esdaile; “Heat transfer in permanent mold casting”, Materials solutions Conference '98 on Aluminum Casting Technology.
- Zin-Hyoung Lee, Tae-Gyu Kim, Yun-Suk Choi; “The movement of the concave casting surface during mushy type solidification and its effect on the heat transfer coefficient”, Metallurgical and Materials Transactions B, vol 29B, October, 1998.
- GF Boiling, D. Fainstein; “Vacancy condensation and the origin of dislocations in growth from the melt”, Phil Mag. 25, 1972.
- H. Fredriksson, U. Åkerlind; “The effect of volume changings on the phase boundary kinetics during a solidification process”, Solidification, science and processing, Int. conf. Bangalore, India, Feb 17–21, 2001.
- H. Fredriksson, T. Emi; “Effect of vacancies and alloying ordering on the thermodynamics during solidification processing”, Materials Transactions, JIM, vol. 39, No. 2, 1998, pp 292–301.
- J. A. Horwath, L.F. Mondolfo; “Dendritic growth”, Acta Metallurgica, vol. 10, 1962.
- C. Gonzalez-Rivera, H. Cruz, A. Garcia H., and J. A. Juarez-Islas, “The effect of the heat transfer on local solidification kinetics of eutectic Al-Si cast alloy”, Journal of Materials Engineering and Performance, 1999, vol. 8, p. 103–110.
- J. Dahlström and H. Fredriksson; “Thermal analysis on Al, Al-Cu and Al-Sn alloys”, ISRN KTH:IMP-INR-99:6 TRITA-Mg 1999:6.
- L. Magnusson, T. El-Benawy, H. Fredriksson; “Solidification processing of Si, an experimental study on the variation of latent heat with the cooling rate”, ISRN KTH:IMP-INR-01:1 TRITA-MG 2001:1.
- C. E. Birchenall, A.F. Riechman, “Heat storage in eutectic alloys”, Met. Trans. A, 1980, vol. IIA, p. 1415–1420.
- Smithells Metals Reference Handbook,: 7th edition, 1992.
- Vargaftik, N.B., Tables of Thermophysical Properties of Liquids and Gases, 2nd ed., Hemisphere Publishing, New York, 1975.
- L.F. Mondolfo; Aluminium alloys: Structure and Properties, Butterworths, 1976