Mechanical properties of Al–Si–Cu alloys produced by the continuous casting process with heating process

References

• Hertzberg RW. Deformation and fracture mechanics of engineering materials. 4th ed. New York, NY: Wiley; 1996. p. 562–566.
   Google Scholar
• Haga T, Tkahashi K, Ikawaand M, et al. Twin roll casting of aluminum alloy strips. J Mater Proc Technol. 2004;153–154:42–47.10.1016/j.jmatprotec.2004.04.018
   Web of Science ®Google Scholar
• Yubo Z, Jianzhong C, Zhihao Z, et al. Effect of low frequency electromagnetic field on casting crack during DC casting superhigh strength aluminum alloy ingots. Mater Sci Eng A. 2005;406:286–292.10.1016/j.msea.2005.07.001
   Web of Science ®Google Scholar
• Haga T, Takahashi K, Ikawaand M, et al. Twin roll casting of aluminum alloy strips. J Mater Proc Technol. 2004;42–47:153–154.
   Google Scholar
• Kleiner S, Beffort O, Wahlen A, et al. Microstructure and mechanical properties of squeeze cast and semi-solid cast Mg–Al alloys. J Light Met. 2002;2:277–280.10.1016/S1471-5317(03)00012-9
   Google Scholar
• Ohno A. Solidification. 1st ed. Germany: Springer; 1987. p. 113–118.10.1007/978-3-642-95537-2
   Google Scholar
• Zhang ZM, Lu T, Xu GJ, et al. Microstructure of binary Mg-Al eutectic alloy wires produced by the Ohno continuous casting process. Acta Metall Sin. 2008;21:275–281.10.1016/S1006-7191(08)60049-6
   Google Scholar
• Okayasu M, Takeuchi S, Yamamoto M, et al. Precise analysis of microstructural effects on mechanical properties of cast ADC12 aluminum alloy. Metall Mater Trans A. 2015;46A:1597–1609.10.1007/s11661-015-2747-1
   Web of Science ®Google Scholar
• Okayasu M, Takeuchi S, Go S, et al. Effects of Sb, Sr and Bi on the material properties of cast Al–Si–Cu alloys produced by the heated mold continuous casting. J Mech Sci Technol. 2016;30:1139–1147.
   Web of Science ®Google Scholar
• Wang QG, Apelian D, Lados DA. Fatigue behavior of A356-T6 aluminum cast alloys. Part I. Effect of casting defects. J Light Met. 2001;1:73–84.10.1016/S1471-5317(00)00008-0
   Google Scholar
• Akhter R, Ivanchev L, Burger HP. Effect of pre/post T6 heat treatment on the mechanical properties of laser welded SSM cast A356 aluminium alloy. Mater Sci Eng A. 2007;447:192–196.10.1016/j.msea.2006.10.148
   Web of Science ®Google Scholar
• Cerri E, Evangelista E, Spigarelli S, et al. Effects of thermal treatments on microstructure and mechanical properties in a thixocast 319 aluminum alloy. Mater Sci Eng A. 2000;284:254–260.10.1016/S0921-5093(00)00748-6
   Web of Science ®Google Scholar
• Okayasu M, Go S. Precise analysis of effects of aging on mechanical properties of cast ADC12 aluminum alloy. Mater Sci Eng A. 2015;638:208–218.10.1016/j.msea.2015.04.072
   Web of Science ®Google Scholar
• Okayasu M, Yoshifuji S, Mizuno M, et al. Comparison of mechanical properties of die cast aluminium alloys: cold v. hot chamber die casting and high v. low speed filling die casting. Int J Cast Met Res. 2009;22:374–381.10.1179/174313309X380413
   Web of Science ®Google Scholar
• Okayasu M, Ohkura Y, Takeuchi S, et al. A study of the mechanical properties of an Al–Si–Cu alloy (ADC12) produced by various casting processes. Mater Sci Eng A. 2012;543:85–192.
   Web of Science ®Google Scholar
• Okayasu M, Sakai K, Takasu S. Material properties of long term naturally aged die cast Al–Si–Cu alloys. Int J Cast Met Res. 2011;24:286–298.10.1179/1743133611Y.0000000001
   Web of Science ®Google Scholar
• Okayasu M, Ota K, Takeuchi S, et al. Influence of microstructural characteristics on mechanical properties of ADC12 aluminum alloy. Mater Sci Eng A. 2014;592:189–200.10.1016/j.msea.2013.10.098
   Web of Science ®Google Scholar
• Jian X, Xu H, Meek TT, et al. Effect of power ultrasound on solidification of aluminum A356 alloy. Mater Lett. 2005;59:190–193.10.1016/j.matlet.2004.09.027
   Web of Science ®Google Scholar
• Okayasu M, Takeuchi S. Crystallization characteristics of cast aluminum alloys during a unidirectional solidification process. Mater Sci Eng A. 2015;633:112–120.10.1016/j.msea.2015.03.001
   Web of Science ®Google Scholar
• Okayasu M, Yoshie S. Mechanical properties of Al–Si13–Ni1.4–Mg1.4–Cu1 alloys produced by the Ohno continuous casting process. Mater Sci Eng A. 2010;527:3120–3126.10.1016/j.msea.2010.01.071
   Web of Science ®Google Scholar
• Hu X, Jiang F, Ai F, et al. Effects of rare earth Er additions on microstructure development and mechanical properties of die-cast ADC12 aluminum alloy. J Alloy Comp. 2012;538:21–27.10.1016/j.jallcom.2012.05.089
   Web of Science ®Google Scholar
• Saeki E, Sugisawa M, Yamaguchi T, et al. Mechanical properties of low yield point steels. J Mater Civil Eng. 1998;10:143–152.10.1061/(ASCE)0899-1561(1998)10:3(143)
   Web of Science ®Google Scholar
• Ueji R, Tsuji N, Minamino Y, et al. Effect of rolling reduction on ultrafine grained structure and mechanical properties of low-carbon steel thermomechanically processed from martensite starting structure. Sci Technol Adv Mater. 2004;5:153–162.10.1016/j.stam.2003.10.017
   Web of Science ®Google Scholar
• Shiozawa K, Tohda Y, Sun SM. Crack initiation and small fatigue crack growth behaviour of squeeze-cast Al–Si aluminium alloys. Fatigue Eng Mater Struct. 1997;20:237–247.10.1111/j.1460-2695.1997.tb00281.x
   Web of Science ®Google Scholar
• Miao WF, Laughlin DE. Effects of Cu content and preaging on precipitation characteristics in aluminum alloy 6022. Metall Mater Trans A. 2000;31:361–371.10.1007/s11661-000-0272-2
   Web of Science ®Google Scholar
• Li Z, Samuel AM, Samuel FH, et al. Effect of alloying elements on the segregation and dissolution of CuAl2 phase in Al–Si–Cu 319 alloys. J Mater Sci. 2003;38:1203–1218.10.1023/A:1022857703995
   Web of Science ®Google Scholar