References
- Meng S, Shusen W, Gu Z, et al. Variation of microstructure of RE-containing AlSi20Cu2Ni1RE0.6 alloy with different cobalt contents. J Alloys Compd. 2011;509:252–257.
- Abouei V, Shabestari SG, Saghafian H. Dry sliding wear behaviour of hypereutectic Al-Si piston alloys containing iron-rich intermetallics. Mater Charact. 2010;61:1089–1096.
- Průša F, Vojtěch D. Mechanical properties and thermal stability of Al-23Si-8Fe-1Cr and Al-23Si-8Fe-5Mn alloys prepared by powder metallurgy. Mater Sci Eng A. 2013;565:13–20.
- Guan RG, Zhao ZY, Chong SL, et al. Effect of wavelike sloping plate rheocasting on microstructures of hypereutectic Al-18 pct Si-5 pct Fe alloys. Metall Mater Trans B. 2012;43:337–343.
- Lin C, Wu SS, Lü SL, et al. Effects of ultrasonic vibration and manganese on microstructure and mechanical properties of hypereutectic Al-Si alloys with 2%Fe. Intermetallics. 2013;32:176–183.
- Wei D, Shusen W, Shulin L, et al. Effects of rheo-squeeze casting parameters on microstructure and mechanical properties of AlCuMnTi alloy. Mater Sci Eng A. 2012;538:320–326.
- Bakhtiyarov SI, Overfelt RA. Measurement of liquid metal viscosity by rotational technique. Acta Mater. 1999;47:4311–4319.
- Spencer DB, Mehrabian R, Flemings MC. Rheological behavior of Sn-15 pct Pb in the crystallization range. Metall Trans. 1972;3:1925–1932.
- Laxmanan V, Flemings MC. Deformation of semi-solid Sn-15 Pct Pb alloy. Metal Trans A. 1980;11:1927–1937.
- Lashkari O, Ajersch F, Charette A, et al. Microstructure and rheological behavior of hypereutectic semi-solid Al-Si alloy under low shear rates compression test. Mater Sci Eng A. 2008;492:377–382.
- Lashkari O. The implication of rheology in semi-solid metal processes: an overview. J Mater Process Technol. 2007;182:229–240.
- Fan Z. Semisolid metal processing. Int Mater Rev. 2002;47:49–85.
- Joly PA, Mehrabian R. The rheology of a partially solid alloy. J Mater Sci. 1976;11:1393–1418.
- McLelland ARA, Henderson NG, Atkinson HV, et al. Anomalous rheological behaviour of semi-solid alloy slurries at low shear rates. Mater Sci Eng A. 1997;232:110–118.
- Barman N, Dutta P. Rheology of A356 alloy during solidification under stirring. Trans Indian Inst Met. 2014;67:101–104.
- Yan M, Luo W. Effects of grain refinement on the rheological behaviors of semisolid hypoeutectic Al-Si alloys. Mater Chem Phys. 2007;104:267–270.
- Heidary DSB, Akhlaghi F. Experimental investigation on the rheological behavior of hypereutectic Al-Si alloys by a precise rotational viscometer. Metall Mater Trans A. 2010;41:3435–3442.
- Das P, Samanta SK, Bera S, et al. Microstructure evolution and rheological behavior of cooling slope processed Al-Si-Cu-Fe alloy slurry. Metall Mater Trans A. 2016;47:2243–2256.
- Taghaddos E, Hejazi MM, Taghiabadi R, et al. Effect of iron-intermetallics on the fluidity of 413 aluminum alloy. J Alloys Compd. 2009;468:539–545.
- Hirai M, Takebayashi K, Yoshikawa Y, et al. Apparent viscosity of Al-10mass%Cu semi-solid alloys. ISIJ Int. 1993;33:405–412.
- Ravi KR, Pillai RM, Amaranathan KR, et al. Fluidity of aluminium alloys and composites: a review. J Alloy Compd. 2008;456:201–210.
- Lee S, Kim B, Lee S. Prediction of solidification paths in Al-Si-Fe ternary system and experimental verification: part I. Fe-containing hypoeutectic Al-Si alloys. Mater Trans. 2011;52:1053–1062.
- Mondolfo LF. Aluminum alloys: structure and properties. London: Butterworths; 1976.
- Yang YS, Tsao CYA. Viscosity and structure variations of Al-Si alloy in the semi-solid state. J Mater Sci. 1997;32:2087–2092.
- Hekmat-Ardakan A Rheological characteristics of hypereutectic aluminum-silicon (A390) in the semi-solid state [ master’s thesis]. Montreal: Ecole Polytechnique; 2006.
- Crepeau PN. Effect of iron in Al-Si casting alloys: a critical review. AFS Trans. 1995;103:361–366.
- Narayanan LA, Samuel FH, Gruzleski JE. Crystallization behavior of iron-containing intermetallic compounds in 319 aluminum alloy. Metall Mater Trans A. 1994;25:1761–1773.
- Kim HY, Park TY, Han SW, et al. Effects of Mn on the crystal structure of α-Al(Mn,Fe)Si particles in A356 alloys. J Cryst Growth. 2006;291:207–211.