Advanced search
Publication Cover
International Journal of Cast Metals Research Volume 34, 2021 - Issue 3-6
Submit an article Journal homepage
127
Views
1
CrossRef citations to date
0
Altmetric
Research Article

A new ductile iron for mechanically and thermally strained rolls Part 2: material development varying Ni, Mo, Cr content using DoE

Stephanie Duwea Department of Foundry Technology, Clausthal University of Technology, Institute of Metallurgy, Clausthal-Zellerfeld, GermanyCorrespondence[email protected]
ORCID Iconhttps://orcid.org/0000-0002-2119-3716View further author information
ORCID Icon,
Martin Liepeb Institute of Manufacturing Technology and Quality Management, Otto Von Guericke Universität Magdeburg Fakulät Für MaschinenbauOtto von Guericke University Magdeburg, Magdeburg, GermanyView further author information
,
Martin Schrumpfc , Walzengießerei & Hartgußwerk Quedlinburg GmbH, Quedlinburg, GermanyView further author information
,
Babette Tonna Department of Foundry Technology, Clausthal University of Technology, Institute of Metallurgy, Clausthal-Zellerfeld, GermanyView further author information
&
Rüdiger Bährb Institute of Manufacturing Technology and Quality Management, Otto Von Guericke Universität Magdeburg Fakulät Für MaschinenbauOtto von Guericke University Magdeburg, Magdeburg, GermanyView further author information
Pages 127-134 | Received 28 May 2021, Accepted 27 Jul 2021, Published online: 07 Aug 2021

References

  • Gumienny G. Effect of the Carbides and Matrix on the Wear Resistance of Nodular Cast Iron. Arch. Foundry Eng. 2013;13(3):25–29.
  • Cui J, Zhang H, Chen L, et al. Microstructure and Mechanical Properties of a Wear-Resistant As-Cast Alloyed Bainite Ductile Iron. Acta Metall. Sin. (Engl. Lett.). 2014;27(3):476–482.
  • Voigt RC. Austempered Ductile Iron - Processing and Properties. Int. J. Cast Metal Res. 1989;2(2):71–93.
  • Moore DJ, Rouns TN, Rundman KB. The Effect of Heat Treatment, Mechanical Deformation, and Alloying Element Additions on the Rate of Bainite Formation in Austempered Ductile Irons. J. Heat Treating. 1985;4(1):7–24. .
  • Lünenbürger A. Zum Umwandlungs- und Verformungsverhalten bainitisch-austenitischer Siliziumstähle. Karlsruhe: Dissertation; 1991.
  • Saikoff E, Andersson E, Bengtsson F, et al. Cobalt in High Speed Steels. Uppsala: Independent bachelor thesis; 2018.
  • Mehl RF. The physics of hardenability. Detroit; 1938.
  • Benam AS. Effect of alloying elements on austempered ductile iron (ADI) properties and its process: Review. China Foundry. 2015;12(1):54–70.
  • Bhadeshia HKDH. 52nd Hatfield Memorial Lecture Large chunks of very strong steel. Mater. Sci. Technol. 2005;21(11):1293–1302.
  • Bunin KP, Troizkaja EP, Citrik SN. Влияние отдельных элементов на термическую устойчивость белого чугуна (Influence of individual elements on the thermal stability of white cast iron). Stal’. 1945;5:417–419.
  • Pietrowski S, Gumienny G. Bainite obtaining in cast iron with carbides castings. Arch. Foundry Eng. 2010;10(1):109–114.
  • Sandvik BPJ, Nevalainen HP. Structure-property relationships in commercial low-alloy bainitic-austenitic steel with high strength, ductility, and toughness. Met. Technol. 1981;8(1):213–220.
  • Kozeschnik E, Bhadeshia HKDH. Influence of silicon on cementite precipitation in steels. Mater. Sci. Technol. 2008;24(3):343–347.
  • Bhadeshia HKDH, Edmonds DV. Bainite in silicon steels: new composition–property approach Part 1. Metal Science. 1983;17(9):411–419.
  • Bhadeshia HKDH. Nanostructured bainite. Proc. R. Soc. A. 2010;466(2113):3–18.
  • Colás R, Ramı́rez J, Sandoval I, et al. Damage in hot rolling work rolls. Wear. 1999;230(1):56–60.
  • Gorjanoj V, Trbižan M, Mamuzić I. A contribution to the investigation of the wear resistance of iron rolls. Int. J. Cast Metal Res. 1998;11(1):43–50.
  • Liepe M, Duwe S, et al. A new Ductile Iron for mechanically and thermally strained rolls: part 1: simulation-based process characterisation of hot rolling. Int. J. Cast Metal Res. (to be published).
  • Zhou W-S, Zhou Q-D, Meng S-K. Abrasion resistance of austempered ductile iron. Int. J. Cast Metal Res. 1993;6(2):69–75.
  • Schaaber O. Über Einflussfaktoren bei der isothermen Austenitumwandlung in der Zwischenstufe (Bainitgebiet I und II). Draht; 1952. p. 7–13.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.