162
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Mechanism of AlP modifying the morphology of Si in Al-20Si alloys based on experimental studies and first-principles calculations

, ORCID Icon, , , &
Pages 56-64 | Received 04 Jul 2022, Accepted 11 Apr 2023, Published online: 17 Apr 2023

References

  • Tisza M, Lukacs ZS, High strength aluminum alloys in car manufacturing. 37th Annual Conference of the International-Deep-Drawing-Research-Group; Univ Waterloo, Waterloo, CANADA. 2018;418:012033.
  • Zhang ZF, Xu J, Bai YL, et al. Semisolid forging of hypereutectic Al-Si Alloy for automobile AC compressor components. Solid State Phenom. 2013;192-193:551–555.
  • Matsuura K, Kudoh M, Kinoshita H, et al. Precipitation of Si particles in a super-rapidly solidified Al–Si hypereutectic alloy. Mater Chem Phys. 2003;81(2–3):393–395.
  • Liao HC, Su NY, Sun G. Correlation between mechanical properties and amount of dendritic α-Al phase in as-cast near-eutectic Al–11.6% Si alloys modified with strontium. Materials Science & Engineering A. 2002;335(1–2):62–66.
  • Al-Helal K, Stone IC, Fan Z. Simultaneous primary si refinement and eutectic modification in Hypereutectic Al–Si Alloys. Trans Indian Inst Met. 2012;65(6):663–667.
  • Hekmat-Ardakan A, Ajersch F. Thermodynamic evaluation of hypereutectic Al–Si (A390) alloy with addition of Mg. Acta Materialia. 2010;58(9):3422–3428.
  • Abdelrahman MS, Abdu MT, Khalifa W. Assessment of eutectic modification Level in Al–Si Alloys via Thermal Analysis. Light Metals. 2017;885–895. 2017.
  • Robles Hernandez FC, Sokolowski JH. Comparison among chemical and electromagnetic stirring and vibration melt treatments for Al–Si hypereutectic alloys. J Alloys Compd. 2006;426(1–2):205–212.
  • Ha TK, Park WJ, Ahn S, et al. Fabrication of spray-formed hypereutectic Al-25Si alloy and its deformation behavior. J Mater Process Technol. 2002;130(131):691–695.
  • Feng HK, Yu SR, Li YL, et al. Effect of ultrasonic treatment on microstructures of hypereutectic Al–Si alloy. J Mater Process Technol. 2008;208(1–3):330–335.
  • Zhang Q, Liu XF, Dai HS. Re-formation of AlP compound in Al–Si melt. J Alloys Compd. 2009;480(2):376–381.
  • Shabestari S, Ghodrat S. Assessment of modification and formation of intermetallic compounds in aluminum alloy using thermal analysis. Materials Science & Engineering A. 2007;467(1–2):150–158.
  • Ho CR, Cantor B. Heterogeneous nucleation of solidification of Si in Al-Si and Al-Si-P alloys. Acta Metallurgica et Materialia. 1995;43(8):3231–3246.
  • Nogita K, McDonald SD, Tsujimoto K. Aluminium phosphide as a eutectic grain nucleus in hypoeutectic Al-Si alloys. Journal of Electron Microscopy. 2004;53(4):361–369.
  • Han YF, Dai YB, Wang J, et al. First-principles calculations on Al/AlB2 interfaces. Appl Surface Sci. 2011;257(17):7831–7836.
  • Han YF, Dai YB, Shu D, et al. First-principles calculations on the stability of Al∕TiB2 interface. Appl Phys Lett. 2006;89(14):144107.
  • Sun JY, Li C, Liu XF, et al. Investigation on AlP as the heterogeneous nucleus of Mg2Si in Al-Mg2Si alloys by experimental observation and first-principles calculation. Results Phys. 2018;8:146–152.
  • Han YF, Li K, Wang J, et al. Influence of high-intensity ultrasound on grain refining performance of Al–5Ti–1B master alloy on aluminium. Materials Science & Engineering A. 2005;405(1–2):306–312.
  • Clark SJ, Segall MD, Pickard CJ, et al. First principles methods using CASTEP. Zeitschrift für Kristallographie - Crystalline Materials. 2005;220(5–6):567–570.
  • Segall MD, Lindan PJD, Probert MJ, et al. First-principles simulation: ideas, illustrations and the CASTEP code. J Phys-Condens Matter. 2002;14(11):2717–2744.
  • Hohenberg P, Kohn W. Inhomogeneous electron gas. Phys Rev B. 1964;136(3B):864–871.
  • Broyden CG. The convergence of a class of double-rank minimization algorithms 1. general considerations. Ima Journal of Applied Mathematics. 1970;6(1):76–90.
  • Bramfitt BL. The effect of carbide and nitride additions on theHeterogeneous Nucleation Behavior of Liquid Iron. Metall Trans. 1970;1(7):1987–1995.
  • Dai HS, Du J, Wang L. First-principle study of the Si/AlP interfacial adhesion. Physica B. 2010;405(2):573–578.
  • Perdew JP, Burke K, Ernzerhof M. Generalized gradient approximation made simple. Phys Rev Lett. 1996;77(18):3865–3868.
  • Kumar KUM. Electronic band structure and complex dielectric function of zb-AlP: a first principles study. Acta Phys Polonica A. 2019;136(3):486–489.
  • Nielsen OH, Martin RM. First-principles calculation of stress. Phys Rev Lett. 1983;50(9):697–700.
  • Yao JG, Pan RK, Yin DF, et al. Microstructures and characteristics of Ti/Al interface with segregated Si element. Chin J Phys. 2019;62:296–303.
  • Fiorentini V, Methfessel M. Extracting convergent surface energies from slab calculations. J Phys. 1996;8(36):6525–6542.
  • Siegel DJ, Hector Jr LG, Adams JB. Adhesion, stability, and bonding at metal/metal-carbide interfaces: al/WC. Surf Sci. 2002;498(3):321–336.
  • Jiang PP, Record M-C, Boulet P. First-principles calculations on CuInSe 2 /AlP heterostructures. J Mater Chem C. 2020;8(14):4732–4742.
  • Liu R, Yin XM, Feng KX. First-principles calculations on Mg/TiB 2 interfaces. Comput Mater Sci. 2018;149:373–378.
  • Li J, Yang YQ, Luo X. First-principles study of the Al(001)/Al3Ti(001) interfacial properties. Comput Mater Sci. 2012;62:136–141.
  • Stiffler SR, Thompson MO, Peercy PS. Supercooling and nucleation of silicon after laser melting. Phys Rev Lett. 1988;60(24):2519–2522.
  • Sediako D, Kasprzak W. Neutron diffraction analysis of solidification phase precipitation in solidification of hypereutectic Al-Si alloy with addition of Cu and Mg. Light Metals. 2012;355–364.
  • Wang S, Fu M, Li XZ, et al. Microstructure and mechanical properties of Al-Si eutectic alloy modified with Al-3P master alloy. J Mater Process Technol. 2018;255:105–109.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.