Advanced search
Publication Cover
International Journal of Cast Metals Research Volume 37, 2024 - Issue 3
Submit an article Journal homepage
45
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Mechanical properties of functionally graded Al series 3000 with addition of Li 2.3 wt%

Seyed Ebrahim Vahdata Department of Engineering, Ayatollah Amoli Branch, Islamic Azad University, Amol, IranCorrespondence[email protected]
,
Amir Rezaiea Department of Engineering, Ayatollah Amoli Branch, Islamic Azad University, Amol, Iran
&
Mariusz Krolb Faculty of Mechanical Engineering, Institute of Engineering Materials and Biomaterials, Silesian University of Technology, Gliwice, Poland
Pages 167-175 | Received 09 Dec 2019, Accepted 12 Dec 2022, Published online: 15 Mar 2024

References

  • Druschitz A, Griffin R, Griffin J, et al. Metalcasting Research at the University of Alabama at Birmingham. Int J Metalcast. 2008;2(4):83–89.
  • Naebe M, Shirvanimoghaddam K. Functionally graded materials: a review of fabrication and properties. Appl Mater Today. 2016;5(Supplement C):223–245. doi: 10.1016/j.apmt.2016.10.001
  • Sobczak JJ, and Drenchev L. Formation of Graded Structure and Properties in Metal Matrix Composites by Use of Electromagnetic Field. Poland: Instytut Odlewnictwa Foundry Research Institute; 2010.
  • Metals Handbook.Casting. Vol 15. Metals Park, USA: ASM International, 2008, p. 416–522.
  • Davis JR. Aluminum and aluminum alloys. USA: ASM International; 1993.
  • Król M. Effect of grain refinements on the microstructure and thermal behaviour of mg–Li–al alloy. J Therm Anal Calorim. 2018;133(1):237–246. doi: 10.1007/s10973-018-7223-x
  • Król M, Mikuszewski T, Kuc D, et al. Thermal Assessment of Modified Ultra-Light Magnesium-Lithium Alloys. Arch Metall Mater. 2017;62(4):2433–2440.
  • Vahdat S. Tin-copper-lead alloy produced by horizontal centrifugal casting. Arch Foundry Eng. 2016;16(1):131–137. doi: 10.1515/afe-2016-0016
  • Mehditabar A, Rahimi GH, Vahdat SE. Characterization of al-al 2 Cu functionally graded material produced by using horizontal centrifugal casting. Multidiscipline Model Mater Struct. 2018;14(4):647–662. doi: 10.1108/MMMS-10-2017-0114
  • Hai-Li Y, Xiao-Hui D, Yong-Jun M, et al. First Principles Study of Al-Li Intermetallic Compounds. Chinese J Chem Phys. 2012;25(6):659.
  • Uesugi T, Takigawa Y, Higashi K. Elastic Constant of AlLi from First Principles. Mater Trans. 2005;46(6):1117–1121.
  • Westbrook JH, Fleischer RL. Intermetallic Compounds, Basic Mechanical Properties and Lattice Defects. In: Intermetallic compounds. USA: Wiley; 2000.
  • ASTM, E1251: standard test method for analysis of aluminum and aluminum alloys by spark atomic emission spectrometry. 2017, ASTM International: West Conshohocken, PA.
  • Park J-W, Kim H-J. Melt filling behaviors and primary Si particle distribution on horizontal centrifugal casting in B390 aluminum alloy. Int J Metalcast. 2017;11(4):802–811. doi: 10.1007/s40962-016-0127-2
  • ASTM, E384: standard test method for microindentation hardness of materials. 2017, ASTM International: West Conshohocken, PA.
  • ASTM:G99-17, standard test method for wear testing with a pin-on-disk apparatus. 2017, ASTM International: West Conshohocken, PA.
  • Lin X, Liu C, Xiao H. Fabrication of al–si–mg functionally graded materials tube reinforced with in situ si/Mg2Si particles by centrifugal casting. Eng. 2013;45(1):8–21. doi: 10.1016/j.compositesb.2012.09.001
  • Alam A, Johnson DD. Structural properties and relative stability of (meta)stable ordered, partially ordered, and disordered Al-Li alloy phases. Phys Rev B. 2012;85(14):144202. doi: 10.1103/PhysRevB.85.144202
  • Augustyn-Pieniążek J, Adrian H, Rzadkosz S, et al. Structure and mechanical properties of al-Li alloys as cast. Arch Foundry Eng. 2013;13(2):5. doi: 10.2478/afe-2013-0027
  • Zheng X, Luo P, Chu Z, et al. Plastic flow behavior and microstructure characteristics of light-weight 2060 Al-li alloy. Mater Sci Eng A. 2018;736:465–471. doi: 10.1016/j.msea.2018.09.010

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.