References
- H. Qian and E. S. Greenhalgh, M. S. Shaffer and A.-J. Bismarck: ‘Carbon nanotube-based hierarchical composites: a review’, J. Mater. Chem., 2010, 20, 4751–4762.
- S. A. Urvanov, Yu L Alshevskiy, A. R. Karaeva, V. Z. Mordkovich, D. N. Chernenko and N Yu Beyilina: ‘Carbon fiber modified with carbon nanotubes and fullerenes for fibrous composite application’, J. Mater. Sci. Eng., 2013, 3, 725–731.
- K. Naito, J.-M. Yang, Y. Tanaka and Y. Kagawa: ‘Tensile properties of carbon nanotubes grown on ultrahigh strength polyacrylonitrile-based and ultrahigh modulus pitch-based carbon fibers’, Appl. Phys. Let., 2008, 92, 231912.
- R. B. Mathur, S. Chatterjee and B. P. Singh: ‘Growth of carbon nanotubes on carbon fibre sub-strates to produce hybrid/phenolic composites with improved mechanical properties’, Compos. Sci. Technol., 2008, 68, 1608–1615.
- P. Agnihotri, S. Basu and K. K. Kar: ‘Effect of carbon nanotube length and density on the prop-erties of carbon nanotube-coated carbon fiber/polyester composites’, Carbon, 2011, 49, 3098–3106.
- F. An, Ch. Lu, Y. Li, J. Guo, X. Lu, H. Lu, S. He and Y. Yang: ‘Preparation and characterization of carbon nanotube-hybridized carbon fiber to reinforce epoxy composite’, Mater. Design, 2012, 33, 197–202.
- F.-H. Zhang, R.-G. Wang, X.-D. He, C. Wang and L.-N. Ren: ‘Interfacial shearing strength and reinforcing mechanisms of an epoxy composite reinforced using a carbon nanotube/carbon fiber hybrid’, J. Mater. Sci., 2009, 44, 3574–3577.
- Q. Song, K-Zh Li, H.-L. Li, H.-J. Li and Ch Ren: ‘Grafting straight carbon nanotubes radially onto carbon fibers and their effect on the mechanical properties of carbon/carbon composites’, Carbon, 2012, 50, 3943–3952.
- E. T. Thostenson, W. Z. Li, D. Z. Wang, Z. F. Ren and T. W. Chou: ‘Carbon nanotube/carbon fiber hybrid multiscale composites’, J. Appl. Phys., 2002, 91, 6034–6037.
- Ch Wang, Y. Li, L. Tong, Q. Song, K. Li, J. Li, Q. Peng, X. He, R. Wang, W. Jiao and Sh Du: ‘The role of grafting force and surface wettability in interfacial enhancement of carbon nanotube/carbon fiber hierarchical composites’, Carbon, 2014, 69, 239–246.
- X. Du, H.-Yu. Liu, C. Zhou, S. Moody and Y.-W. Mai: ‘On the flame synthesis of carbon nanotubes grafted onto carbon fibers and the bonding force between them’, Carbon, 2012, 50, 2347–2350.
- C. C. Luhrs, D. Garcia, M. Tehrani, M. Al-Haika, M. R. Taha and J. Phillips: ‘Generation of carbon nanofilaments on carbon fibers at 550 °C’, Carbon, 2009, 47, 3071–3078.
- A. R. Suraya, S. Mazrah, R. Yunus and I. N. Azowa: ‘Growth of nanotubes on carbon fibres and the tensile properties of resulting carbon fibre reinforced polypropylene composites’, J. Eng. Sci. Tech., 2009, 4, 400–408.
- Zh Fan, Ch Wu and J. Chen: ‘Growth of carbon nanotubes on the surface of carbon fibers’, Carbon, 2008, 46, 380–383.
- F. An, C. Lu, J. Guo and H. Lu: ‘Preparation of CNT-hybridized carbon fiber by aerosol-assisted chemical vapor deposition’, J. Mater. Sci., 2012, 47, 3327–3333.
- Q. Zhang, J. Liu, R. Sager, L. Dai and J. Baur: ‘Effect of carbon nanotubes on the interfacial shear strength of T650 carbon fiber in an epoxy matrix’, J. Compos. Sci. Technol., 2009, 69, 898–904.
- M. J. Thornton and G. S. Walker: ‘Catalytic carbon deposition on three-dimensional carbon fiber preforms using alkane gas feedstocks’, New Carbon Materials, 2009, 24, 251–259.
- N. De Greef, A. Magrez, E. Couteau, J.-P. Locquet, L. Forro and J. W. Seo: ‘Growth of carbon nanotubes on carbon fibers without strength degradation’, Phys. Stat. Solidi B, 2012, 249, 2420–2423.
- S. Rahmanian, A. R. Suraya, R. Zahari and E. S. Zainudin: ‘Synthesis of vertically aligned carbon nanotubes on carbon fiber’, Appl. Surf. Sci., 2010, 271, 424–428.
- N. De Greef, L. Zhang and A. Magrez, L. Forr´o, J.-P. Locquet, I. Verpoest and J. W. Seo: ‘Direct growth of carbon nanotubes on carbon fibers: effect of the CVD parameters on the degradation of mechanical properties of carbon fibers’, Diamond Relat. Mater., 2015, 51, 39–48.
- K. J. Kim, W.-R. Yu, J. H. Youk and J. Lee: ‘Degradation and healing mechanisms of carbon fibers during the catalytic growth of carbon nanotubes on their surfaces’, Appl. Mater. Interfaces, 2012, 4, 2250–2258.
- V. G. de Resende, E. F. Antunes, L. A. de Oliveira, V. J. Trava-Airoldi and E. J. Corat: ‘Growth of carbon nanotube forests on carbon fibers with an amorphous silicon interface’, Carbon, 2010, 48, 3655–3658.
- P. Lv, Y.-Y. Feng, P. Zhang, H.-M. Chen, N. Zhao and W. Feng: ‘Increasing the interfacial strength in carbon fiber/epoxy composites by controlling the orientation and length of carbon nanotubes grown on the fibers’, Carbon, 2011, 49, 4665–4673.
- A. Y. Boroujeni, M. Tehrani, A. J. Nelson and M. Al-Haik: ‘Hybrid carbon nanotube–carbon fiber composites with improved in-plane mechanical properties’, Compos. Part B: Eng., 2014, 66, 475–483.
- H. Liu, Y. Zhang, D. Arato, R. Li, P. Merel and X. Sun: ‘Aligned multi-walled carbon nanotubes on different substrates by floating catalyst chemical vapor deposition: critical effects of buffer layer’, Surf. Coat. Tech., 2008, 202, 4114–4120.
- H. E. Unalan and M. Chhowalla: ‘Investigation of single-walled carbon nanotube growth parameters using alcohol catalytic chemical vapour deposition’, Nanotechnology, 2005, 16, 2153–2163.
- D. Y. Kim, J. B. Yoo, A. S. Berdinsky, Ch Y Park, I. T. Han, J. E. Jung, Y. W. Jin and J. M. Kim: ‘Preparation of uniformly dispersed iron-acetate nanoparticles using freeze-drying method for the growth of carbon nanotubes’, Diamond Relat. Mater., 2005, 14, 810–814.