References
- Shorowordi KM, Laoui T, Haseeb ASMA, et al. Microstructure and interface characteristics of B4C, SiC and Al2O3 reinforced Al matrix composites: a comparative study. J Process Technol. 2003;142:738–743.
- Michael Rajan HB, Dinaharan I, Rambalan S, et al. Influence of friction stir processing on microstructure and properties of AA7075/TiB2 in situ composite. J Alloys Compd. 2016;657:250–260.
- Umanath K, Palanikumar K, Selvamani ST. Analysis of dry sliding wear behavior of Al6061- SiC –al2O3 hybrid metal matrix composites. Compos Part B. 2013;53:159–168.
- Mohanavel V, Rajan K, Ravichandran M. Synthesis, characterization and properties of stir cast AA6351 aluminium nitride (AlN) composites. J Mater Res. 2016;31(2):3824–3831.
- Manjunatha LH, Dinesh P. Development and study on microstructure, hardness and wear properties of as cast, heat treated and extruded cnt- reinforced with 6061al metal matrix composites. Int J Mech Eng Technol. 2012;3:583–598.
- Madeva Nagaral VA, Kori SA. Microstructure and mechanical properties of Al6061-graphite composites fabricated by stir-casting process. Appl Mech Mater. 2015;308–314.
- Harti J, Prasad TB, Nagaral M, et al. Hardness and Tensile behavior of Al2219-TiC metal matrix composites. J Mech Eng Autom. 2016;6(5A):8–12.
- Sharma SC, Seah KHW, Girish BM. Corrosion characteristics of ZA-27 graphite particulate composites. Corros Sci. 1997;39(1):1–7.
- Wei JN, Cheng HF, Zhang YF, et al. Effects of macroscopic graphite particulates on the damping behavior of commercially pure aluminum. Mat Sci Eng. 2002;A325:444-453.
- Hashim JLL, Hashmi MSJ. Metal matrix composites: production by the stir casting method. J Mater Process Technol. 1999;92-93:1–7.
- Liu Z, Guoyin Z, Luo H, et al. Influence of Mg addition on graphite particle distribution in the Al alloy matrix composites. J Mater Sci. 2010;26(3);244-250.
- Sharma SC, Seah KHW, Satish BM, et al. Effect of short glass fibers on the mechanical properties of cast ZA-27 alloy composites. Mater Des. 1996;17:245–250.
- Sharma P, Paliwal K, Garg RK, et al. A study on wear behaviour of Al/6101/graphite composites. J Asia Ceram Soc. 2017.
- Basavaraja P, Nagaral M, Vidyashankar S, et al. Evaluation of Mechanical properties of Al2219-SiC-Graphite reinforced hybrid Composites. Int J Appl Eng Res. 2015
- Kumar A, Gautam RK, Tyagi R. Dry sliding wear characteristics of in situ synthesized Al-TiC composites. Compos Interfaces. 2016.
- Ramakoteswara V, Ramanaiah N, Sarcar MMM. Dry sliding wear behaviour of TiC-AA7075 Metal Matrix Composte. Int J Appl Sci Eng. 2016;14,1:27–37.
- Suresh S, Shenbaga Vinayaga Moorthi N, Vittivel SC, et al. Effect of Graphite addition on mechanical behavior of Al6061/TiB2 hybrid composite using acoustic emission. Mat Sci Eng A. 2014;612:16–27.
- Kataiah GS, Girish DP. The mechanical properties & fractography of aluminium 6061 – tiO2 composites. Int J Pharm Stud Res. 2010;1:17–25.
- Baradeswaran A, Elaya Perumal A. Effect of graphite on mechanical and tribological properties of AA7075 Composites. Tribol Trans. 2015;58:1–6.
- Kumar M, Megalingam Murugan A. Tribological characterization of Al6061/alumina/graphite/redmud hybrid composite for brake rotor application. Part Sci Technol. 2017;1–48.
- Seah KHW, Sharma SC, Girish BM. Mechanical properties of cast ZA-27/Graphite particulate composites. Mater Des. 1995;16(5, 277) ;271-275.
- Jeyasimman D, Gurunathan K, Narayanasamy R. Dry sliding wear behavior of AA6061 -MWCNT nanocomposites prepared by mechanical alloying. IOSR J Mech Civil Eng. 2016;46–53.
- Santhosh Kumar BM, Girish DP. Friction and wear behaviour of tungsten carbide and E glass fibre reinforced Al7075 based hybrid composites. IOP Conf Series Mat Sci Eng. 2018;390 ;1-6.
- Rao RN, Das S, Mondal DP, et al. Dry sliding wear behavior of cast high strength aluminium alloy (Al–zn–mg) and hard particle composites. Wear. 2009;267. ;1688-1695.
- Leng JF, Xing ZH, Huo DJ, et al. Effect of graphite particles on machinability of SiC/Gr/Al composites. Mater Res Innovations. 2015;19.