Power Loss in the Lubricating Gap between Cylinder Block and Valve Plate of Swash Plate Type Axial Piston Machines

References

• Baker, J. 2008. Power Losses in the Lubricating Gap between Cylinder Block and Valve Plate of Swash Plate Type Axial Piston Machines, MS thesis, Purdue University.
   Google Scholar
• Baker, J. and Ivantysynova, M. 2008. Investigation of Power Losses in the Lubricating Gap between Cylinder Block and Valve Plate of Axial Piston Machines, Proc. 5^th Fluid Power Net International PhD Symposium, Krakow, Poland, pp. 302–19.
   Google Scholar
• Baker, J. and Ivantysynova, M. 2009. Advanced Surface Design for Reducing Power Losses in Axial Piston Machines, Proc. 11^th Scandinavian International Conference on Fluid Power, Linköping, Sweden, Vol. 10 (2009), No. 2, pp. 15–30.
   Google Scholar
• Bergada, J. M., Watton, J. and Kumar, S. 2008. Pressure, Flow, Force and Torque Between the Barrel and Port Plate in an Axial Piston Pump, Journal of Dynamic Systems, Measurement and Control, Vol. 130, pp. 011011-1-011011-16.
   Web of Science ®Google Scholar
• Berthe, D. and Godet, M. 1973. A More General Form of Reynolds' Equation-Application to Rough Surfaces. Wear, Vol. 27, pp. 345–57.
   Web of Science ®Google Scholar
• Burton, R. A. 1963. Effects of Two-dimensional, Sinusoidal Roughness on the Load Support Characteristics of a Lubricant Film. Transactions of the ASME, Journal of Basic Engineering, Vol. 85, pp. 258–64.
   Google Scholar
• Dowson, D. and Ehret, P. 1999. Past, Present and Future Studies in Elastohydrodynamics. Proceedings of the Institution of Mechanical Engineers, PT.J. Journal of Engineering Tribology, Vol. 213, No. J5, pp. 317–33.
   Google Scholar
• Fatu, A., Hajjam, M. and Bonneau, D. 2005. An EHD Model to Predict the Interdependent Behavior of Two Dynamically Loaded Hybrid Journal Bearings. Journal of Tribology, Vol. 127, No. 2, pp. 416–24.
   Web of Science ®Google Scholar
• Fredrickson, A. 2008. A Study of the Piston and Cylinder Interface of an Axial piston Pump Using an Advanced Computer Model. MS thesis, Purdue University.
   Google Scholar
• Hamrock, B. J., Schmid, S. R. and Jacobson, B. O. 2004. Fundamentals of Fluid Film Lubrication, 2nd Edition. Marcel Dekker, Inc. New York.
   Google Scholar
• Hargreaves, D. J. 1991. Surface Waviness Effects on the Load-carrying Capacity of Rectangular Slider Bearings. Wear, Vol. 145, pp. 137–151.
   Web of Science ®Google Scholar
• Harris, M. R., Edge, K. A. and Tilley, D. G. 1993. Predicting the Behaviour of Slipper Pads in Swash- plate-Type Axial Piston Pumps. ASME Winter Annual Meeting, New Orleans, Louisiana. 93-WA/FPST-3.
   Google Scholar
• Huang, C. and Ivantysynova, M. 2003. A New Approach to Predict the Load Carrying Ability of the Gap Between Valve Plate and Cylinder Block. Bath Workshop of Power Transmission and Motion Control PTMC 2003, Bath, UK, pp. 225–39.
   Google Scholar
• Ivantysyn, J. and Ivantysynova, M. 2001. Hydrostatic Pumps and Motors. Academic Books International, New Delhi.
   Google Scholar
• Ivantysynova, M. 2001. Energy Losses of Modern Displacement Machines—A new approach of Modelling. Seventh Scandinavian International Conference on Fluid Power, Linköping, Sweden, pp. 377–95.
   Google Scholar
• Ivantysynova, M. 1999. A New Approach to the Design of Sealing and Bearing Gaps of Displacement Machines. Fourth JHPS International Symposium on Fluid Power, Tokyo ′99, pp. 45–50.
   Google Scholar
• Ivantysynova, M., Huang, C. and Behr, R. 2005. Measurements of Elastohydro-Dynamic Pressure Field in the Gap Between Piston and Cylinder. Bath Workshop on Power Transmission and Motion Control PTMC 2005, Bath, UK, pp. 451–465.
   Google Scholar
• Jouini, N. and Ivantysynova, M. 2008. Valve Plate Surface Temperature Prediction in Axial Piston Machines. Proc. 5^th Fluid Power Net International PhD Symposium, Krakow, Poland, pp. 95–110.
   Google Scholar
• Lasaar, R. and Ivantysynova, M. 2005. An Investigation into Micro- and Macrogeometric Design of Piston/Cylinder Assembly of Swash Plate Machines. International Journal of Fluid Power, Vol. 5, No. 1, pp. 23–36.
   Google Scholar
• Lebeck, A. O., Teale, J. L., and Pierce, R. E. 1978. Hydrodynamic Lubrication and Wear in Wavy Contacting Face Seals. Journal of Lubrication Technology, Vol. 100, pp. 81–91.
   Web of Science ®Google Scholar
• Lebeck, A. O. and Young, L. A. 1989. Wavy-Tilt-Dam Seal Ring. US Patent 4836561.
   Google Scholar
• Manring, N. D. 2000. Tipping the Cylinder Block of an Axial-Piston Swash-Plate Type Hydrostatic Machine. Journal of Dynamic Systems, Measurement and Control, Vol. 122, pp. 216–221.
   Web of Science ®Google Scholar
• Patir, N. and Cheng, H. S. 1978. An Average Flow Model for Determining Effects of Three Dimensional Roughness on Partial Hydrodynamic Lubrication. ASME Journal of Lubrication Technology, Vol. 100, pp. 12–17.
   Web of Science ®Google Scholar
• Pelosi, M. and Ivantysynova, M. 2009. A Novel Fluid-Structure Interaction Model for Lubricating Gaps of Piston Machines. Proceedings of the Fifth Fluid Structure Interaction Conference, Crete. pp. 13–24.
   Google Scholar
• Rasheed, H. 1998. Effect of Surface Waviness of the Hydrodynamic Lubrication of a Plain Cylindrical Sliding Element Bearing. Wear, Vol. 223, pp. 1–6.
   Web of Science ®Google Scholar
• Roccatello, A., Mancò, S. and Nervegna, N. 2007. Modelling a Variable Displacement Axial Piston Pump in a Multibody Simulation Environment. Journal of Dynamic Systems, Measurement and Control, Vol. 129, pp. 456–468.
   Web of Science ®Google Scholar
• Ruddy, A. V., Dowson, D. and Taylor, C. M. 1982. The Prediction of Film Thickness in a Mechanical Face Seal with Circumferential Waviness on both the Face and the Seat, Journal Mechanical Engineering Science, Vol. 24, No. 1, pp. 37–43.
   Google Scholar
• Vaidya, A. and Sadeghi, F. 2008. Hydrodynamic Lubrication of Scroll Compressor Thrust Bearing with Grooves and Circular Pockets. Proc. ASHRAE Annual Meeting, Salt Lake City, USA.
   Google Scholar
• Yu, T. H. and Sadgehi, F. 2001. Groove Effects on Thrust Washer Lubrication. Journal of Tribology, Vol. 123, pp. 295–304.
   Web of Science ®Google Scholar
• Wieczorek, U. and Ivantysynova, M. 2002. Computer Aided Optimization of Bearing and Sealing Gaps in Hydrostatic Machines—The Simulation Tool CASPAR. International Journal of Fluid Power, Vol. 3, No. 1, pp. 7–20.
   Google Scholar
• Wohlers, A. and Murrenhoff, H. 2007. Tribological Simulation of a Hydrostatic Swash Plate Bearing in an Axial Piston Pump. Bath Workshop on Power Transmission and Motion Control PTMC 2007, Bath, UK, pp. 129–141.
   Google Scholar
• Zhao, H., Choy, F. K. and Braun, M. J. 2005. Dynamic Characteristics and Stability Analysis of a Wavy Thrust Bearing. Tribology Transactions, 48:1, pp. 133–139.
   Web of Science ®Google Scholar