References
- Agarwal, A., A. Tyagi, A. Ahuja, N. Kumar, N. De, and H. Bhutani. 2014. “Corrosion Aspect of Dental Implants – An Overview and Literature Review.” (2014 February): 56–60. doi:https://doi.org/10.1089/fpd.2014.1826.
- Ahuir-torres, J. I., M. A. Arenas, W. Perrie, and J. De Damborenea. 2018. “Influence of Laser Parameters in Surface Texturing of Ti6Al4V and AA2024-T3 Alloys.” Optics and Lasers in Engineering 103 (December 2017): 100–109. doi:https://doi.org/10.1016/j.optlaseng.2017.12.004.
- Amanov, A., R. Tsuboi, O. Hironobu, and S. Sasaki. 2013. “The Influence of Bulges Produced by Laser Surface Texturing on the Sliding Friction and Wear Behavior.” Tribology International60: 216–223.
- Arslan, A., H. H. Masjuki, M. A. Kalam, M. Varman, R. A. Mufti, M. H. Mosarof, L. S. Khuong, et al. 2016. “Critical Reviews in Solid State and Materials Sciences Surface Texture Manufacturing Techniques and Tribological Effect of Surface Texturing on Cutting Tool Performance: A Review Surface Texture Manufacturing Techniques and Tribological Effect of Surface.” Critical Reviews in Solid State and Materials Sciences 41 (6): 447–481. doi:https://doi.org/10.1080/10408436.2016.1186597.
- Authors, F. 2016. “Tribological Behavior of Femtosecond Laser Textured Surfaces of 20CrNiMo/Beryllium Bronze Tribo-Pairs.” Industrial Lubrication and Tribology. doi:https://doi.org/10.1108/ILT-03-2015-0042.
- Babnik, A., and J. Moz. 2009. “Tribology International Surface Texturing by Pulsed Nd: YAG Laser.” Tribology International42: 1496–1504. doi:https://doi.org/10.1016/j.triboint.2009.06.003.
- Bharatish, A., H. N. Narasimha Murthy, G. Aditya, B. Anand, B. S. Satyanarayana, and M. Krishna. 2015. “Optics & Laser Technology Evaluation of Thermal Residual Stresses in Laser Drilled Alumina Ceramics Using Micro-Raman Spectroscopy and COMSOL Multiphysics.” Optics & Laser Technology70: 76–84. doi:https://doi.org/10.1016/j.optlastec.2015.01.009.
- Bhardwaj, V., R. K. Pandey, and V. K. Agarwal. 2017. “Experimental Investigations for Tribo-Dynamic Behaviours of Conventional and Textured Races Ball Bearings Using Fresh and MoS2blended Greases.” Tribology International 113 (November 2016): 149–168. doi:https://doi.org/10.1016/j.triboint.2016.12.028.
- Boetcher, S. K. S., H. D. Vora, S. Santhanakrishnan, and S. P. Harimkar. 2012. “Evolution of Surface Topography in One- Dimensional Laser Machining of Structural Alumina.” Journal of the European Ceramic Society 32: 4205–4218. doi:https://doi.org/10.1016/j.jeurceramsoc.2012.06.015.
- Borjali, A., J. Langhorn, K. Monson, and B. Raeymaekers. 2017. “Using a Patterned Microtexture to Reduce Polyethylene Wear in Metal-on-Polyethylene Prosthetic Bearing Couples.” Wear 392–393 (July): 77–83. doi:https://doi.org/10.1016/j.wear.2017.09.014.
- Caslaru, R., Michael P. Sealy, Y. B. Guo, and S. C. Chen. 2009. “Fabrication and Characterization of Micro Dent Array Produced by Laser Shock Peening on Aluminum Surfaces.” Transactions of Namri/sme 37: 159–166. http://schen.ucsd.edu/pdf/Guo_NAMRC37.pdf.
- Caslaru, R., Michael P. Sealy, Y. B. Guo, and S. C. Chen. 2009. “Fabrication and Characterization of Micro Dent Array Produced by Laser Shock Peening on Aluminum Surfaces.” TRANSACTIONS OF NAMRI/SME 37 (313): 159–166.
- Charee, W., and V. Tangwarodomnukun. 2018. “Dynamic Features of Bubble Induced by a Nanosecond Pulse Laser in Still and Flowing Water.” Optics & Laser Technology100: 230–243.
- Choudhury, D., D. Rebenda, S. Sasaki, P. Hekrle, M. Vrbka, and M. Zou. 2018. “Journal of the Mechanical Behavior of Biomedical Materials Enhanced Lubricant Fi Lm Formation through Micro-Dimpled Hard-on-Hard Arti Fi Cial Hip Joint: An in-Situ Observation of Dimple Shape E Ff Ects.” Journal of the Mechanical Behavior of Biomedical Materials 81 (October 2017): 120–129. doi:https://doi.org/10.1016/j.jmbbm.2018.02.014.
- Chyr, A., M. Qiu, J. W. Speltz, R. L. Jacobsen, A. P. Sanders, and B. Raeymaekers. 2014. “A Patterned Microtexture to Reduce Friction and Increase Longevity of Prosthetic Hip Joints.” Wear 315 (1–2): 51–57. doi:https://doi.org/10.1016/j.wear.2014.04.001.
- Coblas, D. G., A. Fatu, A. Maoui, and M. Hajjam. 2014. “Manufacturing textured surfaces: State of art and recent developments” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology Manufacturing Textured Surfaces. 229: 3–29. doi:https://doi.org/10.1177/1350650114542242.
- Costil, S., A. Lamraoui, C. Langlade, O. Heintz, and R. Oltra. 2014. “Applied Surface Science Surface Modifications Induced by Pulsed-Laser Texturing – Influence of Laser Impact on the Surface Properties.” Applied Surface Science288: 542–549.
- Cui, C., X. Cui, L. Xiaodong, K. Luo, L. Jinzhong, X. Ren, J. Zhou, C. Fang, R. Farkouh, and L. Yongfeng. 2018. “Plastic-Deformation-Driven SiC Nanoparticle Implantation in an Al Surface by Laser Shock Wave: Mechanical Properties, Microstructure Characteristics, and Synergistic Strengthening Mechanisms.” International Journal of Plasticity 102 (December 2017): 83–100. doi:https://doi.org/10.1016/j.ijplas.2017.12.004.
- Dai, F., Z. Zhang, X. Ren, L. Jinzhong, and S. Huang. 2018a. “Effects of Laser Shock Peening with Contacting Foil on Micro Laser Texturing Surface of Ti6Al4V.” Optics and Lasers in Engineering101 (October 2017): 99–105.
- Dai, F. Z., D. P. Wen, Y. K. Zhang, J. Z. Lu, X. D. Ren, and J. Z. Zhou. 2015. “Micro-Dimple Array Fabricated on Surface of Ti6Al4V with a Masked Laser Ablation Method in Air and Water.” Materials & Design84: 178–184. doi:https://doi.org/10.1016/j.matdes.2015.06.137.
- Dai, F. Z., J. Geng, W. S. Tan, X. D. Ren, J. Z. Lu, and S. Huang. 2018b. “Friction and Wear on Laser Textured Ti6Al4V Surface Subjected to Laser Shock Peening with Contacting Foil.” Optics & Laser Technology103: 142–150.
- Dai, F. Z., J. Z. Lu, Y. K. Zhang, D. P. Wen, X. D. Ren, and J. Z. Zhou. 2014. “Surface Integrity of Micro-Dent Arrays Fabricated by a Novel Laser Shock Processing on the Surface of ANSI 304 Stainless Steel.” Vacuum106: 69–74. doi:https://doi.org/10.1016/j.vacuum.2014.03.015.
- Davis, T., L. Pinzhi, L. Shangwu, D. Grzina, J. Cao, and Q. J. Wang. 2013. “Surface Texturing of Drill Bits for Adhesion Reduction and Tool Life Enhancement.” Tribology Letters113–122. doi:https://doi.org/10.1007/s11249-013-0198-7.
- Demir, A. G., B. Previtali, and N. Lecis. 2013. “Development of Laser Dimpling Strategies on TiN Coatings for Tribological Applications with a Highly Energetic Q-Switched Fibre Laser.” Optics and Laser Technology 54: 53–61. doi:https://doi.org/10.1016/j.optlastec.2013.05.007.
- Denkena, B., J. Köhler, A. Turger, P. Helmecke, T. Correa, and C. Hurschler. 2013. “Manufacturing Conditioned Wear of All-Ceramic Knee Prostheses.” Procedia CIRP5: 179–184. doi:https://doi.org/10.1016/j.procir.2013.01.036.
- Devor, R. E. 2004. “Modeling of Forces for Drills with Chip-Breaking Grooves.” Journal of Manufacturing Science and Engineering Journal Style126 (August 2004): 555–564. doi:https://doi.org/10.1115/1.1763183.
- Dougherty, P. S. M., G. Srivastava, O. Recep Onler, B. Ozdoganlar, and C. Fred Higgs. 2015. “Lubrication Enhancement for UHMWPE Sliding Contacts through Surface Texturing.” Tribology Transactions 58 (1): 79–86. doi:https://doi.org/10.1080/10402004.2014.933935.
- Etsion, I., and E. Sher. 2009. “Tribology International Improving Fuel Efficiency with Laser Surface Textured Piston Rings.” Accounts of Chemical Research 42: 542–547. doi:https://doi.org/10.1016/j.triboint.2008.02.015.
- Ezhilmaran, V., L. Vijayaraghavan, N. J. Vasa, S. Ganesan, and N. K. Cherian. 2016. “Pulsed Nd 3 + : YAG Laser Assisted Micro-Dimple Formation in Chromium Films under Different Ambient Conditions.” Journal of Laser Micro/Nano engineering11 (2): 179–184. doi:https://doi.org/10.2961/jlmn.2016.02.000.
- Ezhilmaran, V., N. J. Vasa, and L. Vijayaraghavan. 2018. “Surface & Coatings Technology Investigation on Generation of Laser Assisted Dimples on Piston Ring Surface and in Fl Uence of Dimple Parameters on Friction.” Surface & Coatings Technology335 (July 2017): 314–326. doi:https://doi.org/10.1016/j.surfcoat.2017.12.052.
- Fang, S., C. J. Hsu, S. Klein, L. Llanes, D. Bähre, and F. Mücklich. 2018a. “Influence of Laser Pulse Number on the Ablation of Cemented Tungsten Carbides (Wc-coni) with Different Grain Size †.” Lubricants 6: 11. doi:https://doi.org/10.3390/lubricants6010011.
- Fang, S., R. Lima, D. Sandoval, D. Bähre, and L. Llanes. 2018b. “Ablation Investigation of Cemented Carbides Using Short-Pulse Laser Beams.” Procedia CIRP 68 (April): 172–177. doi:https://doi.org/10.1016/j.procir.2017.12.042.
- Fisher, J. 1994. “Wear of Ultra High Molecular Weight Polyethylene in Total Artificial Joints.” Current Orthopaedics 8: 164–169. doi:https://doi.org/10.1016/0268-0890(94)90048-5.
- Furlan, V., A. Gökhan, and B. Previtali. 2015. “Optics & Laser Technology Micro and Sub-Micron Surface Structuring of AZ31 by Laser Re-Melting and Dimpling.” Optics & Laser Technology75: 164–172.
- Gökhan, A., B. Previtali, and N. Lecis. 2013. “Optics & Laser Technology Development of Laser Dimpling Strategies on TiN Coatings for Tribological Applications with a Highly Energetic Q-Switched Fi Bre Laser.” Optics and Laser Technology 54: 53–61. doi:https://doi.org/10.1016/j.optlastec.2013.05.007.
- Gökhan, A., K. Pangovski, W. O. Neill, and B. Previtali. 2014. “Surface & Coatings Technology Laser Micromachining of TiN Coatings with Variable Pulse Durations and Shapes in Ns Regime.” Surface & Coatings Technology 258: 240–248. doi:https://doi.org/10.1016/j.surfcoat.2014.09.021.
- Grabon, W., P. Pawlus, S. Wos, W. Koszela, and M. Wieczorowski. 2017. “Tribology International E Ff Ects of Honed Cylinder Liner Surface Texture on Tribological Properties of Piston Ring-Liner Assembly in Short Time Tests.” Tribiology International 113 (August 2016): 137–148. doi:https://doi.org/10.1016/j.triboint.2016.11.025.
- Greco, A., Q. Wang, A. Greco, and Q. Jane Wang. 2009. “Surface Texturing of Tribological Interfaces Using the Vibromechanical Texturing Method Surface Texturing of Tribological Vibromechanical Texturing.” Journal of Manufacturing Science and Engineering131: 061005–1. doi:https://doi.org/10.1115/1.4000418.
- Greco, A., Q. Wang, P. Taylor, C. Lin, and Q. J. Wang. 2010. “Rolling Contact Fatigue Performance of Vibro- Mechanical Textured Surfaces.” Tribology Transactions 53 (March 2016): 610–620. doi:https://doi.org/10.1080/10402000903518861.
- Gropper, D., L. Wang, and T. J. Harvey. 2016. “Tribology International Hydrodynamic Lubrication of Textured Surfaces : A Review of Modeling Techniques and Key Fi Ndings.” Tribology International94: 509–529. doi:https://doi.org/10.1016/j.triboint.2015.10.009.
- Guo, Y. B., and R. Caslaru. 2011. “Journal of Materials Processing Technology Fabrication and Characterization of Micro Dent Arrays Produced by Laser Shock Peening on Titanium Ti-6Al-4V Surfaces Focal Lens Water Ablative Material LSP Dent.” Journal of Materials Processing Technology 211 (4): 729–736. doi:https://doi.org/10.1016/j.jmatprotec.2010.12.007.
- Hao, M., X. Daochun, F. Wei, and L. Qingqing. 2018. “Tribology International Quantitative Analysis of Frictional Behavior of Cupronickel B10 at the Tool-Chip Interface during Dry Cutting.” Tribology International 118 (July 2017): 163–169. doi:https://doi.org/10.1016/j.triboint.2017.09.033.
- Helena, P., T. De Oliveira, A. Gonçalves, and A. Janssen. 2015. “Effect of Solid-State Laser Parameters on the Surface's Topography Formation during Texturization of Hard Metal Cutting Tools.” Journal of Aerospace Technology and Management7: 63–69. doi:https://doi.org/10.5028/jatm.v7i1.411.
- Hu, J., and X. Hebing. 2016. “Tribology International Friction and Wear Behavior Analysis of the Stainless Steel Surface Fabricated by Laser Texturing Underwater.” Tribology International102: 371–377.
- Hu, T., H. Litian, and Q. Ding. 2012. “The Effect of Laser Surface Texturing on the Tribological Behavior of Ti-6Al-4V.” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology226: 1–10. doi:https://doi.org/10.1177/1350650112450801.
- Hu, T., Y. Zhang, and H. Litian. 2012. “Tribological Investigation of MoS 2 Coatings Deposited on the Laser Textured Surface.” Wear 278–279: 77–82. doi:https://doi.org/10.1016/j.wear.2012.01.001.
- Hussain, M., M. Sufyan, N. Abbas, H. Ahmad, F. M. Joyia, M. Noman, M. M. Ahsan, et al. 2019. “Influence of Laser Processing Conditions for Texturing on Ultra-High-Molecular-Weight-Polyethylene (UHMWPE) Surface.” Case Studies in Thermal Engineering 14 (April): 100491. doi:https://doi.org/10.1016/j.csite.2019.100491.
- Iordanova, I., V. Antonov, and S. Gurkovsky. 2002. “Changes of Microstructure and Mechanical Properties of Cold-Rolled Low Carbon Steel Due to Its Surface Treatment by Nd: Glass Pulsed Laser.” Surface and Coatings Technology 153: 267–275. doi:https://doi.org/10.1016/S0257-8972(01)01668-1.
- Ippolito, C., Y. Sufujiang, Y. J. Lai, and T. Bryant. 2017. “Process Parameter Optimization for Hot Embossing Uniformly Textured UHMWPE Surfaces for Orthopedic Bearings.” Procedia CIRP 65: 163–167. doi:https://doi.org/10.1016/j.procir.2017.04.039.
- Jianxin, D., S. Wenlong, and Z. Hui. 2009. “International Journal of Machine Tools & Manufacture Design, Fabrication and Properties of a Self-Lubricated Tool in Dry Cutting.” International Journal of Machine Tools & Manufacture Design49: 66–72. doi:https://doi.org/10.1016/j.ijmachtools.2008.08.001.
- Jianxin, D., S. Wenlong, Z. Hui, Y. Pei, and L. Aihua. 2011. “Friction and Wear Behaviors of the Carbide Tools Embedded with Solid Lubricants in Sliding Wear Tests and in Dry Cutting Processes.” Wear 270 (9–10): 666–674. doi:https://doi.org/10.1016/j.wear.2011.01.031.
- Ã, X. W., W. Liu, F. Zhou, and Z. Di. 2009. “Preliminary Investigation of the Effect of Dimple Size on Friction in Line Contacts.” Tribology International42: 1118–1123. doi:https://doi.org/10.1016/j.triboint.2009.03.012.
- Jones, K., and S. R. Schmid. 2016. “Experimental Investigation of Laser Texturing and Its Effect on Friction and Lubrication.” Procedia Manufacturing5: 568–577. doi:https://doi.org/10.1016/j.promfg.2016.08.047.
- Joshi, B., K. Tripathi, G. Gyawali, and S. Wohn. 2016. “Progress in Natural Science : Materials International the Effect of Laser Surface Texturing on the Tribological Performance of Different Sialon Ceramic Phases.” Progress in Natural Science : Materials International26: 415–421.
- Kruusing, A. 2004. “Underwater and Water-Assisted Laser Processing: Part 1 – General Features, Steam Cleaning and Shock Processing.” Optics and Lasers in Engineering41: 307–327.
- Kumari, R., T. Scharnweber, W. Pfleging, H. Besser, and J. Dutta. 2015. “Applied Surface Science Laser Surface Textured Titanium Alloy (Ti – 6Al – 4V) – Part II – Studies on Bio-Compatibility.” Applied Surface Science357: 750–758.
- Kümmel, J., D. Braun, J. Gibmeier, J. Schneider, C. Greiner, V. Schulze, and A. Wanner. 2015. “Journal of Materials Processing Technology Study on Micro Texturing of Uncoated Cemented Carbide Cutting Tools for Wear Improvement and Built-up Edge Stabilisation.” Journal of Materials Processing Technology215: 62–70. doi:https://doi.org/10.1016/j.jbiotec.2015.05.001.
- Kümmel, J., J. Gibmeier, E. Müller, R. Schneider, V. Schulze, and A. Wanner. 2014. “Detailed Analysis of Microstructure of Intentionally Formed Built-up Edges for Improving Wear Behaviour in Dry Metal Cutting Process.” Wear311: 21–30.
- Kurella, A., and N. B. Dahotre. 2005. “Review Paper: Surface Modification for Bioimplants: The Role of Laser Surface Engineering.” Journal of Biomaterials Applications 20: 5–50. doi:https://doi.org/10.1177/0885328205052974.
- Kustandi, T. S., J. H. Choo, H. Y. Low, and S. K. Sinha. 2010. “Texturing of UHMWPE Surface via NIL for Low Friction and Wear Properties.” Journal of Physics D: Applied Physics 43: 1. doi:https://doi.org/10.1088/0022-3727/43/1/015301.
- Lei, S., S. Devarajan, Z. Chang, and R. Ford. 2008. “A Study of Micropool Lubricated Cutting Tool in Machining of Mild Steel.” Journal of Materials Processing Technology9: 1612–1620. doi:https://doi.org/10.1016/j.jmatprotec.2008.04.024.
- Li, K., Z. Yao, H. Yongxiang, and G. Weibin. 2014. “Tribology International Friction and Wear Performance of Laser Peen Textured Surface under Starved Lubrication.” Tribology International77: 97–105.
- Li, Z., J. Bai, and J. Tang. 2018. “Applied Surface Science Micro-EDM Method to Fabricate Three-Dimensional Surface Textures Used as SERS-Active Substrate.” Applied Surface Science 458 (July): 810–818. doi:https://doi.org/10.1016/j.apsusc.2018.07.132.
- Liu, X., Y. Liu, L. Lei, and Y. Tian. 2019. “Performances of Micro-Textured WC-10Ni3Al Cemented Carbides Cutting Tool in Turning of Ti6Al4V.” International Journal of Refractory Metals and Hard Materials 84: 104987. doi:https://doi.org/10.1016/j.ijrmhm.2019.104987.
- Liu, Y., J. Deng, W. Wang, R. Duan, R. Meng, G. Dongliang, and L. Xuemu. 2018. “Effect of Texture Parameters on Cutting Performance of Fl Ank-Faced Textured Carbide Tools in Dry Cutting of Green Al 2 O 3 Ceramics.” Ceramics International 44 (11): 13205–13217. doi:https://doi.org/10.1016/j.ceramint.2018.04.146.
- Luo, K. Y., C. Y. Wang, Y. M. Li, M. Luo, S. Huang, X. J. Hua, and J. Z. Lu. 2014. “Applied Surface Science Effects of Laser Shock Peening and Groove Spacing on the Wear Behavior of Non-Smooth Surface Fabricated by Laser Surface Texturing.” Applied Surface Science313: 600–606. doi:https://doi.org/10.1016/j.apsusc.2014.06.029.
- Luo, Y., S. Ge, Z. Jin, and J. Fisher. 2008. “Effect of Surface Modification on Surface Properties and Tribological Behaviours of Titanium Alloys.” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology223: 311–316. doi:https://doi.org/10.1243/13506501JET488.
- Mao, Y. S., L. Wang, K. M. Chen, S. Q. Wang, and X. H. Cui. 2013. “Tribo-Layer and Its Role in Dry Sliding Wear of Ti-6Al-4V Alloy.” Wear 297 (1–2): 1032–1039. doi:https://doi.org/10.1016/j.wear.2012.11.063.
- Materials, H., L. Liang, J. Yuan, L. Xiaoqiang, F. Yang, and L. Jiang. 2018. “Wear Behavior of the Micro-Grooved Texture on WC-Ni 3 Al Cermet Prepared by Laser Surface Texturing.” International Journal of Refractory Metals & Hard Materials 72: 211–222. doi:https://doi.org/10.1016/j.ijrmhm.2017.12.023.
- Ming, Q., Z. Yong-zhen, Y. Jian-heng, and Z. Jun. 2006. “Microstructure and Tribological Characteristics of Ti-6Al-4V Alloy against GCr15 under High Speed and Dry Sliding.” Materials Science and Engineering: A434: 71–75. doi:https://doi.org/10.1016/j.msea.2006.07.043.
- Niketh, S., and G. L. Samuel. 2017. “Surface Texturing for Tribology Enhancement and Its Application on Drill Tool for the Sustainable Machining of Titanium Alloy.” Journal of Cleaner Production 167: 253–270. doi:https://doi.org/10.1016/j.jclepro.2017.08.178.
- Niketh, S., and G. L. Samuel. 2018. “Drilling Performance of Micro Textured Tools under Dry, Wet and MQL Condition.” Journal of Manufacturing Processes32: 254–268.
- Obikawa, T., A. Kamio, H. Takaoka, and A. Osada. 2011. “International Journal of Machine Tools & Manufacture Micro-Texture at the Coated Tool Face for High Performance Cutting.” International Journal of Machine Tools and Manufacture 51 (12): 966–972. doi:https://doi.org/10.1016/j.ijmachtools.2011.08.013.
- Palmer, R. 2014. “Implants.” British Dental Journal 187: 3. doi:https://doi.org/10.1038/sj.bdj.4800222.
- Puls, H., F. Klocke, and D. Lung. 2014. “Experimental Investigation on Friction under Metal Cutting Conditions.” Wear 310 (1–2): 63–71. doi:https://doi.org/10.1016/j.wear.2013.12.020.
- Qiu, M., A. Chyr, A. P. Sanders, and B. Raeymaekers. 2014. “Designing Prosthetic Knee Joints with Bio-Inspired Bearing Surfaces.” Tribology International 77: 106–110. doi:https://doi.org/10.1016/j.triboint.2014.04.025.
- Ranjan, P., and S. S. Hiremath. 2019. “Role of Textured Tool in Improving Machining Performance: A Review.” Journal of Manufacturing Processes 43 (April): 47–73. doi:https://doi.org/10.1016/j.jmapro.2019.04.011.
- Razavi, S. M. J., P. Ferro, and F. Berto. 2017. “Fatigue Assessment of Ti-6Al-4V Circular Notched Specimens Produced by Selective Laser Melting.” Metals 7: 291. doi:https://doi.org/10.3390/met7080291.
- Roychowdhury, A., S. Gupta, P. E. C. Vidyasagara, and S. Pal. 2004. “Wear Studies of Frequently Used Implant Materials.” Trend Biomater. Artif. Organs17 (2): 135–140.
- Sankar, M. R., S. Tarun Kumar, K. K. Gajrani, J. Swaminathan, and U. S. Dixit. 2014. “Experimental Investigations on CO 2 Laser Micro Texturing on Near- Titanium Alloy (IMI 834)”. 5th International & 26th All India Manufacturing Technology, Design and Research Conference(Aimtdr 2014): 1–6.
- Sasi, R., K. Subbus, and I. A. Palani. 2017. “Surface & Coatings Technology Performance of Laser Surface Textured High Speed Steel Cutting Tool in Machining of al7075-t6 Aerospace Alloy.” Surface & Coatings Technology 313: 337–346. doi:https://doi.org/10.1016/j.surfcoat.2017.01.118.
- Schulz, W., and W. Schulz. 2013. “Review on Laser Drilling I. Fundamentals, Modeling, and Simulation Review on Laser Drilling I. Fundamentals, Modeling, and Simulation.” Journal of Laser Applications25: 012006. doi:https://doi.org/10.2351/1.4773837.
- 2013. “Sciverse, Oxygen-free High Conductivity, and Introduction Micro-dimple.” Optics & Laser Technology 48: 216–225. doi: https://doi.org/10.1016/j.optlastec.2012.09.015
- Sealy, M. P., Y. B. Guo, M. P. Sealy, and Y. B. Guo. 2009. “International Journal for Computational Methods in Fabrication and Finite Element Simulation of Micro-Laser Shock Peening for Micro Dents Fabrication and Finite Element Simulation of Micro-Laser Shock Peening for Micro Dents.” International Journal for Computational Methods in in Engineering Science and Mechanics2287: 2–11. doi:https://doi.org/10.1080/15502280802665975.
- Shang, Q., Y. Aibing, W. Jianzhao, C. Shi, and W. Niu. 2017. “Crossmark.” Tribiology International 105 (October 2016): 158–165. doi:https://doi.org/10.1016/j.triboint.2016.10.008.
- Sharma, V., and P. M. Pandey. 2016. “Recent Advances in Turning with Textured Cutting Tools: A Review.” Journal of Cleaner Production 137: 701–715. doi:https://doi.org/10.1016/j.jclepro.2016.07.138.
- Steen, W. M. 2010. “Laser Material Processing.” Springer Science & Business Media.
- Stoeterau, R. L., A. Janssen, and G. Mallmann. 2016. “Analysis of Dimple Textured Surfaces on Cutting Tools.” Journal of the Brazilian Society of Mechanical Sciences and Engineering. doi:https://doi.org/10.1007/s40430-016-0692-6.
- Su, Y., L. Liang, H. Ning, and W. Zhao. 2014. “Experimental Study of Fi Ber Laser Surface Texturing of Polycrystalline Diamond Tools.” Int. Journal of Refractory Metals and Hard Materials RMHM 45: 117–124. doi:https://doi.org/10.1016/j.ijrmhm.2014.03.001.
- Sugihara, T., P Singh, and T Enomoto. 2017. “ScienceDirect Development of Novel Cutting Tools with Dimple Textured Surfaces for Dry Machining of Aluminum Alloys.” Procedia Manufacturing 14: 111–117. doi: https://doi.org/10.1016/j.promfg.2017.11.013.
- Sugihara, T., and T. Enomoto. 2017. “Performance of Cutting Tools with Dimple Textured Surfaces: A Comparative Study of Different Texture Patterns.” Precision Engineering 49: 52–60. doi: https://doi.org/10.1016/j.precisioneng.2017.01.009.
- Sun, J., Y. Zhou, J. Deng, and J. Zhao. 2016. “Effect of Hybrid Texture Combining Micro-Pits and Micro-Grooves on Cutting Performance of WC/Co-Based Tools.” The International Journal of Advanced Manufacturing Technology 86 (17923): 3383–3394. doi:https://doi.org/10.1007/s00170-016-8452-4.
- Sun, Q., H. Tianchang, H. Fan, Y. Zhang, and H. Litian. 2015. “Tribology International Dry Sliding Wear Behavior of TC11 Alloy at 500 1 C: In Fl Uence of Laser Surface Texturing.” Tribology International92: 136–145. doi: https://doi.org/10.1016/j.triboint.2015.06.003.
- Tan, Y., G. Wu, J. Yang, and T. Pan. 2004. “Laser Shock Peening on Fatigue Crack Growth Behaviour.” Bioorganicheskaia Khimiia 30: 649–656. doi:https://doi.org/10.1023/b:rubi.0000049777.07961.11.
- Uhlmann, E., S. Piltz, and U. Doll. 2005. “Machining of Micro/Miniature Dies and Moulds by Electrical Discharge Machining – Recent Development.” Journal of Materials Processing Technology167: 488–493. doi:https://doi.org/10.1016/j.jmatprotec.2005.06.013.
- Vardya, M. S. 2017. “Influence of Laser Shock Texturing on W9 Steel Surface Friction Property Influence of Laser Shock Texturing on W9 Steel Surface Friction Property.” In IOP Conference Series: Materials Science and Engineering 230: 012010. doi:https://doi.org/10.1088/1757-899X/230/1/012010.
- Viana, R., M. Sérgio, F. De Lima, W. Falco, W. Martins, and Á. Rocha. 2015. “Surface & Coatings Technology Laser Texturing of Substrate of Coated Tools – Performance during Machining and in Adhesion Tests.” Surface & Coatings Technology276: 485–501.
- Viespe, C., and D. Miu. 2017. “Repetition Rate Effects in Picosecond Laser Microprocessing of Aluminum and Steel in Water Repetition Rate Effects in Picosecond Laser Microprocessing of Aluminum and Steel in Water.” Micromachines 8: 316. doi:https://doi.org/10.3390/mi8110316.
- Vijayaraghavan, V., L. Ezhilmaran, and N. J. V. Sivarama. 2018. “Influence of Pulse Width in Laser Assisted Texturing on Moly – Chrome Films.” Applied Physics A. doi:https://doi.org/10.1007/s00339-018-1582-9.
- Viteri, V., S. De, and E. Fuentes. 2013. “Titanium and Titanium Alloys as Biomaterials.” Tribology—Fundamentals and advancements. In Tech, 155–181.
- Vora, H. D., and N. B. Dahotre. 2015. “Multiphysics Theoretical Evaluation of Thermal Stresses in Laser Machined Structural Alumina.” Lasers in Manufacturing and Materials Processing 2 (1): 1–23. doi:https://doi.org/10.1007/s40516-014-0004-x.
- Wakuda, M., Y. Yamauchi, S. Kanzaki, and Y. Yasuda. 2003. “Effect of Surface Texturing on Friction Reduction between Ceramic and Steel Materials under Lubricated Sliding Contact.” Wear254: 356–363. doi:https://doi.org/10.1016/S0043-1648(03)00004-8.
- Wu, Z., J. Deng, S. Chun, C. Luo, and D. Xia. 2014. “Performance of the Micro-Texture Self-Lubricating and Pulsating Heat Pipe Self-Cooling Tools in Dry Cutting Process.” International Journal of Refractory Metals and Hard Materials 45: 238–248. doi:https://doi.org/10.1016/j.ijrmhm.2014.02.004.
- Wu, Z., Y. Xing, P. Huang, L. Liu, L. Huang, Y. Xu, Y. Han, X. Feng, and C. Qin. 2017. “Tribological Properties of Dimple-Textured Titanium Alloys under Dry Sliding Contact.” Surface & Coatings Technology309: 21–28. doi:https://doi.org/10.1007/s00403-016-1694-z.
- Xing, Y., J. Deng, Y. Zhou, and L. Shipeng. 2014. “Fabrication and Tribological Properties of Al 2 O 3/TiC Ceramic with Nano-Textures and WS 2/Zr Soft-Coatings.” Surface & Coatings Technology 258: 699–710. doi:https://doi.org/10.1016/j.surfcoat.2014.08.014.
- Yilbas, B. S., C. Karatas, A. F. M. Arif, and B. J. Abdul Aleem. 2011. “Laser Control Melting of Alumina Surfaces and Thermal Stress Analysis.” Optics and Laser Technology 43 (4): 858–865. doi:https://doi.org/10.1016/j.optlastec.2010.10.009.
- Yu, Z., M. Chunshi, A. Chengming, L. Jianzhong, and D. Guo. 2012. “Prediction of Tool Wear in Micro USM.” CIRP Annals – Manufacturing Technology 61 (1): 227–230. doi:https://doi.org/10.1016/j.cirp.2012.03.060.
- Ze, W., D. Jianxin, C. Yang, X. Youqiang, and Z. Jun. 2012. “Performance of the Self-Lubricating Textured Tools in Dry Cutting of Ti-6Al-4V.” International Journal of Advanced Manufacturing Technology 62 (9–12): 943–951. doi:https://doi.org/10.1007/s00170-011-3853-x.
- Zenebe, D., J. H. Kim, S. Geun, Y. S. Jung, and S. S. Kim. 2013. “Application of Taguchi Techniques to Study Friction and Wear Properties of MoS 2 Coatings Deposited on Laser Textured Surface.” Surface & Coatings Technology 232: 504–514. doi:https://doi.org/10.1016/j.surfcoat.2013.06.009.
- Zhang, B., W. Huang, J. Wang, and X. Wang. 2013. “Comparison of the Effects of Surface Texture on the Surfaces of Steel and UHMWPE.” Tribology International65: 138–145. doi:https://doi.org/10.1016/j.triboint.2013.01.004.
- Zhang, S., A. Rodriguez, M. Morales, X. Zeng, and E. Van Der Heide. 2015. “International Journal of Solids and Structures the Role of the Sliding Direction against a Grooved Channel Texture on Tool Steel : An Experimental Study on Tactile Friction.” International Journal of Solids and Structures57: 53–61.
- Zheng, L., C. Zhang, C. Zhang, and F. Dai. 2017. “Performance of Micro-Dent Array Fabricated by Laser Shock Peening on the Surface of A304 Stainless Steel.” Vacuum138: 93–100.
- Zhou, J., H. Shen, Y. Pan, and X. Ding. 2016. “Experimental Study on Laser Microstructures Using Long Pulse.” Optics and Lasers in Engineering78: 113–120.