References
- Alexander, B., and K. Viktor. 2010. “Proportions of Hand Segments.” International Journal of Morphology 28 (3): 755–758.
- Amouzgar, K. 2012. “Multi-Objective Optimization Using Genetic Algorithms.” Tekniska Högskolan, Product Development and Materials Engineering
- Carrozza, M. C. E., V. E. Sebastiani, G. Cappiello, S. Roccella, M. Zecca, R. Lazzarini, and P. Dario 2003. “Experimental Analysis of an Innovative Prosthetic Hand with Proprioceptive Sensors.” Proceedings of the 2003 IEEE International Conference on Robotics & Automation, Taipei, Taiwan, September, 14–19. doi:https://doi.org/10.1016/s0162-0134(03)00072-2
- Freivalds, A. 2004. Biomechanics of the Upper Limbs: Mechanics, Modeling, and Musculoskeletal Injuries. 2nd Edition, CRC Press LLC. Taylor & Francis Group.
- Jabbar, M. A. 2018. “Design and Analysis of Underactuated Robotic Finger for Grasping and Pinching Tasks.” MSc. Thesis, Mechanical Engineering Department, University of Technology.
- Jayavani, K., and G. M. Kadhar Nawaz. 2014 August. “Study of Genetic Algorithm, an Evolutionary Approach.” International Journal on Recent and Innovation Trends in Computing and Communication 2 (8). ISSN: 2321-8169. pp. 2331-2334.
- Kargov, A., C. Pylatiuk, J. Martin, S. Schulz, and L. O. Döderlein. 2004. “A Comparison of the Grip Force Distribution in Natural Hands and in Prosthetic Hands.” Disability and Rehabilitation 26: 705–711. Institute for Applied Computer Science, Disability and Rehabilitation. doi:https://doi.org/10.1080/09638280410001704278.
- Khurmi, R. S., and J. K. Gupta. 2008. “Theory of Machines.” Textbook, U. P. S. C. (Engg. Services); Section ‘B’ of A. M. I. E. (1).
- Nacy, S. M., S. S. Hassan, and S. H. Bakhy. 2009. “Geometric Optimization of Three-Phalanx Prosthesis Underactuated Fingers Using Particles Swarm Algorithm.” American Journal of Engineering and Applied Sciences 2 (2): 381–387. doi:https://doi.org/10.3844/ajeassp.2009.381.387.
- O’Toole, K. T., and M. M. McGrath. 2007. “Mechanical Design and Theoretical Analysis of a Four Fingered Prosthetic Hand Incorporating Embedded SMA Bundle Actuators.” International Journal of Mathematical, Physical and Engineering Sciences 1 (2). pp. 83-90.
- Otto Bock Orthopedic Industry GmbH. 1997. Myobock-Arm Components 1997/98. Otto Bock.
- Pons, J. L., E. Rocon, R. Ceres, D. Reynaerts, B. Saro, S. Levin, and W. Van Moorleghem. 2004. “The MANUS-HAND Dexterous Robotics Upper Limb Prosthesis.” Mechanical and Manipulation Aspects, Autonomous Robots, 16, 143–163. doi:https://doi.org/10.1023/B:AURO.0000016862.38337.f1
- Pylatiuk, C. S., M. A. Kargov, S. Schulz, and G. Bretthauer. 2004. “Progress in the Development of a Multifunctional Hand Prosthesis.” Proceedings of the 26th Annual International Conference of the IEEE EMBS, San Francisco, CA, USA, September, 1–5.
- Soud, W. A., I. A. Baqer, and M. R. Ahmed. 2019. “Experimental Study of 3D Printing Density Effect on the Mechanical Properties of the Carbon-Fiber and Polylactic Acid Specimens.” Engineering and Technology Journal 37 (Part A. 04). pp.128-132.
- Vinet, R., Y. Lozach, N. Beaudry, and G. Drouin. 1995. “Design Methodology for a Multifunctional Hand Prosthesis.” Journal of Rehabilitation Research & Development 32: 316–324. http://www.ncbi.nlm.nih.gov/pubmed/8770796.