References
- Akbarzadeh, A., J. Enferadi, and M. Sharifnia. 2013. “Dynamics Analysis of a 3-RRP Spherical Parallel Manipulator Using the Natural Orthogonal Complement.” Multibody System Dynamics 29 (4): 361–380.
- Altuzarra, O., A. Zubizarreta, I. Cabanes, and C. Pinto. 2009. “Dynamics of a Four Degrees-of-freedom Parallel Manipulator with Parallelogram Joints.” Mechatronics 19: 1269–1279. doi:https://doi.org/10.1016/j.mechatronics.2009.08.003.
- Cheng, G., J.-L. Yu, and W. Gu. 2012. “Kinematic Analysis of 3SPS+1PS Bionic Parallel Test Platform for Hip Joint Simulator Based on Unit Quaternion.” Robotics and Computer-integrated Manufacturing 28: 257–264. doi:https://doi.org/10.1016/j.rcim.2011.09.007.
- Clavel, R. 1988. “Delta, a Fast Robot with Parallel Geometry, In: Proceedings of the 18th International Symposium on Industrial Robots (ISIR).” Sydney (Australia) 91–100.
- Dasgupta, B., and T. S. Mruthyunjaya. 1998. “A Newton-Euler Formulation For The Inverse Dynamics Of The Stewart Platform Manipulator.” Mechanism and Machine Theory 33 (8): 1135–1152. doi:https://doi.org/10.1016/S0094-114X(97)00118-3.
- Enferadi, J., and A. Shahi. 2015. “A Closed-form Solution for the Position Analysis of A Novel Fully Spherical Parallel Manipulator.” Robotica 33 (10): 2114–2136. doi:https://doi.org/10.1017/S0263574715000752.
- Enferadi, J., and A. Shahi. 2016. “On the Position Analysis of a New Spherical Parallel Robot with Orientation Applications.” Robotics and Computer-integrated Manufacturing 37: 151–161. doi:https://doi.org/10.1016/j.rcim.2015.09.004.
- Gallardo, J., J. M. Rico, and A. Frisoli. 2003. “Dynamics of Parallel Manipulators by Means of Screw Theory.” Mechanism and Machine Theory 38 (11): 1113–1131. doi:https://doi.org/10.1016/S0094-114X(03)00054-5.
- Gan, D., J. S. Dai, J. Dias, R. Umer, and L. Seneviratne. 2015. “Singularity-Free Workspace Aimed Optimal Design of a 2T2R Parallel Mechanism for Automated Fiber Placement.” Journal of Mechanisms and Robotics 7: 041022. doi:https://doi.org/10.1115/1.4029957.
- Guo, H. B., and H. R. Li. 2006. “Dynamic Analysis and Simulation of a Six Degree of Freedom Stewart Platform Manipulator.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 220. doi:https://doi.org/10.1243/095440605X32075.
- Innocenti, C. M., and V. Parenti-Castelli. 1993. “Echelon Form Solution of Direct Kinematics for the General Fully Parallel Spherical Wrist.” Mechanism and Machine Theory 28 (4): 553–561. doi:https://doi.org/10.1016/0094-114X(93)90035-T.
- Li, Y., and Q. Xu. 2009. “Dynamic Modeling and Robust Control of a 3-PRC Translational Parallel Kinematic Machine.” Robotics and Computer-integrated Manufacturing 25: 630–640. doi:https://doi.org/10.1016/j.rcim.2008.05.006.
- Liu, X., Y. Xu, J. Yao, J. Xu, S. Wen, and Y. Zhao. 2015. “Control-faced Dynamics with Deformation Compatibility for a 5-DOF Active Over-constrained Spatial Parallel Manipulator 6PUS–UPU.” Mechatronics 30: 107–115. doi:https://doi.org/10.1016/j.mechatronics.2015.06.014.
- Liu, X.-J., and J. Kim. 2005. “A New Spatial Three-DoF Parallel Manipulator with High Rotational Capability.” IEEE/ASME Transactions On Mechatronics 10 (5). doi:https://doi.org/10.1109/TMECH.2005.856219.
- Liu, X.-J., J. Wang, and G. Pritschow. 2005. “A New Family of Spatial 3-DoF Fully-parallel Manipulators with High Rotational Capability.” Mechanism and Machine Theory 40: 475–494. doi:https://doi.org/10.1016/j.mechmachtheory.2004.10.001.
- Lopez, M., E. Castillo, G. Garcıa, and A. Bashir. 2006. “Delta Robot: Inverse, Direct, and Intermediate Jacobians.” Proceedings of the Institution of Mechanical Engineers, PartC: Journal of Mechanical Engineering Science 220 (1): 103–109.
- Salgado, O., O. Altuzarra, V. Petuya, and A. Hernández. 2008. “Synthesis and Design of a Novel 3T1R Fully-Parallel Manipulator.” Journal of Mechanical Design 130: 042305. doi:https://doi.org/10.1115/1.2839005.
- Song, Y., H. Gao, T. N. Sun, G. Dong, B. Lian, and Y. Qi. 2014. “Kinematic Analysis and Optimal Design of a Novel 1T3R Parallel Manipulator with an Articulated Travelling Plate.” Robotics and Computer-integrated Manufacturing 30: 508–516. doi:https://doi.org/10.1016/j.rcim.2014.03.006.
- Stewart, D. 1965. “A Platform with Six Degrees of Freedom, Proc.” Proceedings of the Institution of Mechanical Engineers 180 (1): 371–386. doi:https://doi.org/10.1243/PIME_PROC_1965_180_029_02.
- Sugimoto, K. 1987. “Kinematics and Dynamic Analysis of Parallel Manipulator by Means of Motor Algebra.” Journal of Mechanisms, Transmissions, and Automation in Design 109 (1): 3–7. doi:https://doi.org/10.1115/1.3258783.
- Tale Masouleh, M., and C. M. Gosselin. 2011. “Singularity Analysis of 5-RPUR Parallel Mechanisms (3T2R).” The International Journal of Advanced Manufacturing Technology 57 (9): 1107–1121. doi:https://doi.org/10.1007/s00170-011-3349-8.
- Tale Masouleh, M., C. M. Gosselin, M. H. Saadatzi, X. Kong, and H. D. Taghirad. 2011. “Kinematic Analysis of 5-RPUR (3T2R) Parallel Mechanisms.” Meccanica 46 (1): 131–146. doi:https://doi.org/10.1007/s11012-010-9393-x.
- Tsai, L.-W. 1999. “Solving the Inverse Dynamics of a Stewart-Gough Manipulator by the Principle of Virtual Work.” Journal of Mechanical Design 122 (1): 3–9. doi:https://doi.org/10.1115/1.533540.
- Wang, L., J. Wu, and J. Wang. 2010. “Dynamic Formulation of a Planar 3-DOF Parallel Manipulator with Actuation Redundancy.” Robotics and Computer-integrated Manufacturing 26: 67–73. doi:https://doi.org/10.1016/j.rcim.2009.03.001.
- Wang, L., B. Zhang, and J. Wu. 2016. “Optimum Design of a 4-PSS-PU Redundant Parallel Manipulator Based on Kinematics and Dynamics.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 230 (13): 2273-2284. doi: https://doi.org/10.1177/0954406215592440.
- Wu, G., B. Sh, and P. Hjørnet. 2016. “Architecture Optimization of a Parallel Schönflies-motion Robot for Pick-and-place Applications in a Predefined Workspace.” Mechanism and Machine Theory 106: 148–165. doi:https://doi.org/10.1016/j.mechmachtheory.2016.09.005.
- Wu, J., J. Wang, T. Li, L. Wang, and L. Guan. 2008a. “Dynamic Dexterity of a Planar 2-DOF Parallel Manipulator in a Hybrid Machine Tool.” Robotica 26: 93–98. doi:https://doi.org/10.1017/S0263574707003621.
- Wu, J., J. Wang, L. Wang, and H. Shao. 2008b. “Dimensional Synthesis and Dynamic Manipulability of a Planar Two-degree-of-freedom Parallel Manipulator.” Proceedings of the Institution of Mechanical Engineers, PartC: Journal of Mechanical Engineering Science 222 (6): 1061–1069.
- Wu, J., J.-S. Wang, L.-P. Wang, and T.-M. Li. 2007. “Dexterity and Stiffness Analysis of a Three-degree-of-freedom Planar Parallel Manipulator with Actuation Redundancy.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. doi:https://doi.org/10.1243/09544062JMES456.
- Wun, J., X. Chen, T. Li, and L. Wang. 2013. “Optimal Design of a 2-DOF Parallel Manipulator with Actuation Redundancy considering Kinematics and Natural Frequency.” Robotics and Computer-integrated Manufacturing 29: 80–85. doi:https://doi.org/10.1016/j.rcim.2012.07.005.
- Xu, Q., and Y. Li. 2007. “Design and Analysis of a New Singularity-free Three-prismatic-revolute-cylindrical Translational Parallel Manipulator.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. doi:https://doi.org/10.1243/0954406JMES267.
- Zarkandi, S. 2011. “Kinematics and Singularity Analysis of a Parallel Manipulator with Three Rotational and One Translational Dofs.” Mechanics Based Design of Structures and Machines 39: 392–407. doi:https://doi.org/10.1080/15397734.2011.559149.
- Zarkandi, S. 2018. “Kinematic and Dynamic Modeling of a Planar Parallel Manipulator Served as CNC Tool Holder.” International Journal of Dynamics and Control 6 (1): 14–28. doi:https://doi.org/10.1007/s40435-016-0292-4.
- Zarkandi, S. 2019. “Kinematics, Workspace and Optimal Design of a Novel 4RSS+PS Parallel Manipulator.” Journal of the Brazilian Society of Mechanical Sciences and Engineering 41: 474. doi:https://doi.org/10.1007/s40430-019-1981-7.
- Zhao, Y. 2013. “Dynamic Optimum Design of a Three Translational Degrees of Freedom Parallel Robot while considering Anisotropic Property.” Robotics and Computer-integrated Manufacturing 29: 100–112. doi:https://doi.org/10.1016/j.rcim.2012.11.004.
- Zhao, Y., K. Qiu, S. Wang, and Z. Zhang. 2015. “Inverse Kinematics and Rigid-body Dynamics for a Three Rotational Degrees of Freedom Parallel Manipulator.” Robotics and Computer-integrated Manufacturing 31: 40–50. doi:https://doi.org/10.1016/j.rcim.2014.07.002.