References
- Ashtiani, H. R. R., and P. Shahsavari. 2016. “Strain-dependent Constitutive Equations to Predict the High-temperature Flow Behavior of AA2030 Aluminum Alloy.” Mechanics of Materials 100: 209–218. doi:https://doi.org/10.1016/j.mechmat.2016.06.018.
- Bobbili, R., A. Paman, and V. Madhu. 2016. “High Strain Rate Tensile Behavior of Al-4.8Cu-1.2Mg Alloy.” Materials Science and Engineering: A 651: 753–762. doi:https://doi.org/10.1016/j.msea.2015.11.030.
- Bois-Brochu, A., C. Blais, F. A. Tchitembo Goma, and D. Larouche. 2016. “Modeling of Anisotropy for Al-Li 2099 T83 Extrusions and Effect of Precipitate Density.” Materials Science and Engineering: A 673: 581–586. doi:https://doi.org/10.1016/j.msea.2016.07.081.
- Choi, S.-H., F. barlat, and J. liu. 2001. “Effect of Precipitates on Plastic Anisotropy for Polycrystalline Aluminum Alloys.” Metallurgical and Materials Transactions A, 32A, 2239–2247.
- Cyr, E. D., M. Mohammadi, R. K. Mishra, and K. Inal. 2015. “A Three Dimensional (3D) Thermo-elasto-viscoplastic Constitutive Model for FCC Polycrystals.” International Journal of Plasticity 70: 166–190. doi:https://doi.org/10.1016/j.ijplas.2015.04.001.
- Dai, Q. S., Y. L. Deng, S. S. Ou, and P. Fu. 2018. “Constitutive Model of 5083 Aluminum Alloy Based on Dynamic Material Parameters.” Journal of Central South University (Science and Technology) 49 (5): 1072–1079. doi:https://doi.org/10.11817/j.issn.1672-7207.2018.05.007.
- Duan, L. B., H. B. Jiang, A. G. Cheng, H. T. Xue, and G. Q. Geng. 2018. “Multi-objective Reliability-based Design Optimization for the VRB-VCS FLB under Front-impact Collision.” Structural and Multidisciplinary Optimization 59 (5): 1835–1851. doi:https://doi.org/10.1007/s00158-018-2142-9.
- Duan, L. B., N. C. Xiao, Z. H. Hu, G. Y. Li, and A. G. Cheng. 2016. “An Efficient Lightweight Design Strategy for Body-in-white Based on Implicit Parameterization Technique.” Structural and Multidisciplinary Optimization 55 (5): 1927–1943. doi:https://doi.org/10.1007/s00158-016-1621-0.
- Džoja, M., V. Cvitanić, M. Safaei, and L. Krstulović-Opara. 2019. “Modeling the Plastic Anisotropy Evolution of AA5754-H22 Sheet and Implementation in Predicting Cylindrical Cup Drawing Process.” European Journal of Mechanics - A/ Solids 77: 103806. doi:https://doi.org/10.1016/j.euromechsol.2019.103806.
- Fan, Z. J., L. J. Gui, and R. Y. Su. 2014. “Research and Development of Automotive Lightweight Technology.” Journal of Automotive Safety and Energy 5 (1): 1–16. doi:https://doi.org/10.3969/j.issn.1674-8484.2014.01.001.
- He, Z. B., Z. B. Wang, Y. L. Lin, and X. B. Fan. 2019. “Hot Deformation Behavior of a 2024 Aluminum Alloy Sheet and Its Modeling by Fields-Backofen Model considering Strain Rate Evolution.” Metals 9 (2): 243. doi:https://doi.org/10.3390/met9020243.
- Lee, E.-H., H. Choi, T. B. Stoughton, and J. W. Yoon. 2019. “Combined Anisotropic and Distortion Hardening to Describe Directional Response with Bauschinger Effect.” International Journal of Plasticity 122: 73–88. doi:https://doi.org/10.1016/j.ijplas.2019.07.007.
- Li, S., and O. V. Mishin. 2014. “Analysis of Crystallographic Textures in Aluminum Plates Processed by Equal Channel Angular Extrusion.” Metallurgical and Materials Transactions A 45 (4): 1689–1692. doi:https://doi.org/10.1007/s11661-014-2195-3.
- Li, Y. L. 2001. “Definition and Mechanical Characteristics of True Stress-Strain.” Journal of Chongqing University(Natural Science Edition) 24 (3): 58–60.
- Liang, Z. L., and Q. Zhang. 2018. “Quasi-Static Loading Responses and Constitutive Modeling of Al-Si–Mg Alloy.” Metals 8 (10): 838. doi:https://doi.org/10.3390/met8100838.
- Lin, L., X. D. Zhi, F. Fan, S. J. Meng, and J. J. Su. 2014. “Determination of Parameters of the Johnson-Cook Model of Q235B Steel.” Journal of Vibration and Shock 33 (9): 153–158, 172.
- Odoh, D., Y. Mahmoodkhani, M. Whitney, and M. Wells. 2017. “Prediction of the Hot Flow Stress Behavior of AA6063 Including Mg2Si Dissolution.” Journal of Materials Engineering and Performance 26 (3): 1186–1194. doi:https://doi.org/10.1007/s11665-017-2557-2.
- Peng, Y., X. Z. Chen, S. Peng, C. Chen, J. H. Li, and G. W. Liu. 2018. “Strain Rate-Dependent Constitutive and Low-Stress Triaxiality Fracture Behavior Investigation of 6005 Al Alloy.” Advances in Materials Science and Engineering 2018: 1–14. doi:https://doi.org/10.1155/2018/2712937.
- Qin, F. C., H. P. Qi, Y. H. Kang, and C. Y. Liu. 2019. “Study on Constitutive Characteristic of As-Cast AA6061 Alloy under Plane Strain Compression Based on Orthogonal Analysis.” Advances in Materials Science and Engineering 2019: 1–11. doi:https://doi.org/10.1155/2019/9328630.
- Rahmaan, T., J. Noder, A. Abedini, P. Zhou, C. Butcher, and M. J. Worswick. 2020. “Anisotropic Plasticity Characterization of 6000- and 7000-series Aluminum Sheet Alloys at Various Strain Rates.” International Journal of Impact Engineering 135: 103390. doi:https://doi.org/10.1016/j.ijimpeng.2019.103390.
- Saravanan, L., and T. Senthilvelan. 2016. “Constitutive Equation and Microstructure Evaluation of an Extruded Aluminum Alloy.” Journal of Materials Research and Technology 5 (1): 21–28. doi:https://doi.org/10.1016/j.jmrt.2015.04.002.
- Tan, J. Q., M. Zhan, S. Liu, T. Huang, J. Guo, and H. Yang. 2015. “A Modified Johnson-Cook Model for Tensile Flow Behaviors of A 7050-T7451 Aluminum Alloy at High Strain Rates.” Materials Science and Engineering: A 631: 214–219. doi:https://doi.org/10.1016/j.msea.2015.02.010.
- Yang, S. L., J. Shen, X. D. Yan, X. W. Li, B. Q. Sun, and F. Zhang. 2015. “Flow Behavior and Constitutive Equations of Al-Cu-Li-Mg-Mn-Zn-Ag Alloy during Isothermal Compression.” The Chinese Journal of Nonferrous Metals 25 (8): 2083–2090. doi:https://doi.org/10.19476/j.ysxb.1004.0609.2015.08.007.
- Zhang, Y. B., S. Yao, X. Hong, and Z. G. Wang. 2017. “A Modified Johnson-Cook Model for 7N01 Aluminum Alloy under Dynamic Condition.” Journal of Central South University 24 (11): 2550–2555. doi:https://doi.org/10.1007/s11771-017-3668-5.
- Zhou, L. Z., L. M. Yang, Y. J. Peng, L. J. Fei, and X. R. Zhu. 2017. “Comparative Study on Constitutive Models to Predict Flow Stress of Fe-Cr-Ni Preform Reinforced Al-Si-Cu-Ni-Mg Composite.” Journal of the Wuhan University of Technology-Mater Science Education 32 (3): 666–676. doi:https://doi.org/10.1007/s11595-017-1651-5.