References
- Antony, J. 2000. “Multi-response Optimization in Industrial Experiments Using Taguchi’s Quality Loss Function and Principal Component Analysis.” Quality and Reliability Engineering International 16: 3–8. doi:https://doi.org/10.1002/(ISSN)1099-1638.
- Becht IV, C. 2000. “Fatigue of Bellows, a New Design Approach.” International Journal of Pressure Vessels and Piping 77: 843–850. doi:https://doi.org/10.1016/S0308-0161(00)00078-8.
- Becht IV, C. 2002. “An Evaluation of EJMA Stress Calculations for Unreinforced Bellows.” Journal of Pressure Vessel Technology, Transactions of the ASME 124: 124–129. doi:https://doi.org/10.1115/1.1426405.
- Belyaev, A. K., T. V. Zinovieva, and K. K. Smirnov. 2017. “Theoretical and Experimental Studies of the Stress-strain State of Expansion Bellows as Elastic Shells.” St. Petersburg Polytechnic University Journal Physics and Mathematics 3: 7–14. doi:https://doi.org/10.1016/j.spjpm.2017.03.003.
- EJMA. 2008. Standards of Expansion Joint Manufacturers Association. 9th ed. New York. http://www.ejma.org/EJMAStandards.htm
- Gawande, S. H. 2018. “A Combined Numerical and Experimental Study on Metal Expansion Bellows for STHE.” Journal of the Brazilian Society of Mechanical Sciences and Engineering 40: 1–14. doi:https://doi.org/10.1007/s40430-018-1382-3.
- Gawande, S. H., and N. D. Pagar. 2015. “Numerical Investigations on Characteristics of Stresses in U-Shaped Metal Expansion Bellows.” International Journal of Metals 2015: 1–9. doi:https://doi.org/10.1155/2015/957925.
- Girish, B. M., H. S. Siddesh, and B. M. Satish. 2019. “Taguchi Grey Relational Analysis for Parametric Optimization of Severe Plastic Deformation Process.” SN Applied Sciences 1: 937. doi:https://doi.org/10.1007/s42452-019-0982-6.
- Hashemi, R. 2014. “Analysis of Necking in Tube Hydroforming by Means of Extended Forming Limit Stress Diagram.” Engineering Solid Mechanics 2: 73–82. doi:https://doi.org/10.5267/j.esm.2014.2.004.
- Hsiao, Y. F., Y. S. Tarng, and W. J. Huang. 2008. “Optimization of Plasma Arc Welding Parameters by Using the Taguchi Method with Grey Relational Analysis.” Materials and Manufacturing Processes 23: 51–58. doi:https://doi.org/10.1080/10426910701524527.
- Huadong, L. U., and Y. L. Weiqiang. 2012. “Failure Analysis of a Bellows Expansion Joint of Inconel625 Alloy.” Advanced Materials Research 500: 580–585. 10.4028/www.scientific.net/AMR.500.580.
- Jangra, K., S. Grover, and A. Aggarwal. 2011. “Simultaneous Optimization of Material Removal Rate and Surface Roughness for WEDM of WC-Co Composite Using Grey Relational Analysis along with Taguchi Method.” International Journal of Industrial Engineering Computations 2 (3): 479–490. doi:https://doi.org/10.5267/j.ijiec.
- Kaushik, N., and S. Singhal. 2018. “Hybrid Combination of Taguchi-GRA-PCA for Optimization of Wear Behavior in AA6063/SiCp Matrix Composite.” Production & Manufacturing Research 6 (1): 171–189. doi:https://doi.org/10.1080/21693277.2018.1479666.
- Ko, B. G., G. J. Park, and W. I. Lee. 1995. “Mechanical Behavior of U –shaped Bellows and Shape Optimal Design Using Multiple Objective Optimization Method.” KSME Journal 9: 91–101. doi:https://doi.org/10.1007/BF02954357.
- Kumar, J. P., J. S. Kumar, J. R. K. Sarathi, Venkatesh, M., Christopher, A. S. and Ganesh, K. C. 2017. “Effect of Design Parameters on the Static Mechanical Behavior of Metal Bellows Using Design of Experiment and Finite Element Analysis.” International Journal on Interactive Design and Manufacturing 11 (3): 535–545. doi:https://doi.org/10.1007/s12008-016-0306-7.
- Li, N., Y. J. Chen, and D. D. Kong. 2019. “Multi-response Optimization of Ti-6Al-4V Turning Operations Using Taguchi-based Grey Relational Analysis Coupled with Kernel Principal Component Analysis.” Advanced Manufacturing 7 (2): 142–154. doi:https://doi.org/10.1007/s40436-019-00251-8.
- Li, Y. 1990. “Strength Analysis and Structural Optimization of U-shaped Bellows.” International Journal of Pressure Vessels and Piping 42: 33–46. doi:https://doi.org/10.1016/0308-0161(90)90053-K.
- Manjunath Patel, G. C., K. Prasad, and M. B. Parappagoudar. 2016. “Modelling and Multi Objective Optimization of Squeeze Casting Process Using Regression Analysis and Genetic Algorithm.” Australian Journal of Mechanical Engineering 14 (3): 182–198. doi:https://doi.org/10.1080/14484846.2015.1093231.
- Mehat, N. M., S. Kamaruddin, and A. R. Othman. 2014. “Hybrid Integration of Taguchi Parametric Design, Grey Relational Analysis, and Principal Component Analysis Optimization for Plastic Gear Production.” Chinese Journal of Engineering Article ID 351206: 1–11. doi:https://doi.org/10.1155/2014/351206.
- Ni, C. C. 2012. “Grey Relational Grade Analysis between Vickers Hardness and Fatigue Crack Growth Data of 2024-T35 Aluminium Alloy.” Advance Materials Research 2435-2439.
- Otto, K. N., and E. K. Antonsson. 1993. “Extensions to the Taguchi Method of Product Design.” Journal of Mechanical Design 115: 5–13. doi:https://doi.org/10.1115/1.2919325.
- Panda, A., A. K. Sahoo, and R. Rout. 2016. “Multi-attribute Decision Making Parametric Optimization and Modeling in Hard Turning Using Ceramic Insert through Grey Relational Analysis: A Case Study.” Decision Science Letters 5 (4): 581–592. doi:https://doi.org/10.5267/j.dsl.2016.3.001.
- Pavithraa, E., and V. S. SenthilKumar. 2018. “Experimental Investigation and Numerical Analysis on Fatigue Life of Bellows.” Materials Today Proceedings, Elsevier 5 (3): 848–856.
- Pervez, M. N., F. Shafiq, Z. Sarwar, M. Jilani, and Y. Cai. 2018. “Multi-Response Optimization of Resin Finishing by Using a Taguchi-Based Gray Relational Analysis.” Materials 11 (3): 426, 1–19. doi:https://doi.org/10.3390/ma11030426.
- Pierce, S. O., and L. E. Jeffrey. 2012. “Failure Analysis of a Metal Bellows Flexible Hose Subjected to Multiple Pressure Cycles.” Engineering Failure Analysis 22: 11–20. doi:https://doi.org/10.1016/j.engfailanal.2011.12.005.
- Pradhan, M. K. 2013. “Estimating the Effect of Process Parameters on MRR, TWR and Radial Overcut of EDMed AISI D2 Tool Steel by RSM and GRA Coupled with PCA.” International Journal of Advanced Manufacturing Technology 68: 591–605. doi:https://doi.org/10.1007/s00170-013-4780-9.
- Rajarajan, S., C. Ramesh Kannan, and S. D. Milon. 2019. “A Comparative Study of the Machining Characteristics on Turning AISI 52100 Alloy Steel in Dry and Microlubrication Condition.” Australian Journal of Mechanical Engineering 1–13. doi:https://doi.org/10.1080/14484846.2019.1710019.
- Ren, J., J. Zhou, and J. Zeng. 2015. “Analysis and Optimization of Cutter Geometric Parameters for Surface Integrity in Milling Titanium Alloy Using a Modified grey–Taguchi Method.” Journal of Engineering Manufacture, Proc IMechE Part B 230(11): 1–15.
- Sahoo, A., and B. Sahoo. 2012. “Performance Studies of Multilayer Hard Surface Coatings (Tin/ticn/al2o3/tin) of Indexable Carbide Inserts in Hard Machining: Part-II (RSM, Grey Relational and Techno Economical Approach).” Measurement 46 (8): 2868–2884. doi:https://doi.org/10.1016/j.measurement.2012.09.023.
- Senthilkumar, N., T. Ganapathy, and T. Tamizharasan. 2015. “Optimisation of Machining and Geometrical Parameters in Turning Process Using Taguchi Method.” Australian Journal of Mechanical Engineering 12 (2): 233–246. doi:https://doi.org/10.7158/M12-113.2014.12.2.
- Sibalija, T. V., and V. D. Majstorovic. 2012. “An Integrated Approach to Optimise Parameter Design of Multi-response Processes Based on Taguchi Method and Artificial Intelligence.” Journal of Intelligent Manufacturing 23: 1511–1528. doi:https://doi.org/10.1007/s10845-010-0451-y.
- Snedden, N. W. 1985. “Analysis and Design Guidance for the Lateral Stiffness of Bellows Expansion Joint.” Thin-Walled Structures 3 (2): 145–162. doi:https://doi.org/10.1016/0263-8231(85)90030-8.
- Sutono, S. B., H. A. Salwa, Z. Taha, and Subagyo. 2017. “Integration of Grey-based Taguchi Method and Principal Component Analysis for Multi-response Decision-making in Kansei Engineering.” European Journal of Industrial Engineering 11 (2): 205–228. doi:https://doi.org/10.1504/EJIE.2017.083254.
- Sylajakumari, P. A., R. Ramkrishnasamy, and G. Palaniappan. 2018. “Taguchi Grey Relational Analysis for Multi Response Optimization of Wear in Co-continuous Composite.” Materials 11: 1743,1–17.
- Takatsu, H., M. Yamamoto, M. Shimizu, and M. Ohta. 1993. “Stress Analysis Method of U-shaped Bellows and Its Experimental Verification.” Fusion Engineering and Design 22: 239–250. doi:https://doi.org/10.1016/0920-3796(93)90118-2.
- Tzeng, C., Y. Lin, Y. Yang, and M. Jeng. 2009. “Optimization of Turning Operations with Multiple Performance Characteristics Using the Taguchi Method and Grey Relational Analysis.” Journal of Material Processing Technology 209: 2753–2759. doi:https://doi.org/10.1016/j.jmatprotec.2008.06.046.
- Zhang, K., Y. Zhang, and P. Qu. 2014. “Comprehensive Multivariate Grey Incidence Degree Based on Principal Component Analysis.” Journal of Systems Engineering and Electronics 25 (5): 840–847. doi:https://doi.org/10.1109/JSEE.2014.00097.