References
- Agrawal, B. N. 1986. Design of GeosynchronousSpacecraft. NJ: Prentice-Hall Englewood Cliffs.
- Akcin, Y., S. Karakaya, and O. Soykasap. 2016. “Electrical, Thermal and Mechanical Properties of CNT Treated Prepreg CFRP Composites.” Materials Sciences and Applications 7: 465–483. [Online]. Accessed 1 September 2016. http://www.scirp.org/journal/msa
- Cobb, G. R., R. P. O’Hara, R. A. Kemnitz, V. P. Sabelkin, and B. M. Doan. 2019. “Quantifying the Effects of Ultraviolet Type C Radiation on the Mechanical and Electrical Properties of Carbon Nanotube Sheet for Space-based Applications.” Materials Today Communications 18: 7–13. doi:https://doi.org/10.1016/j.mtcomm.2018.10.016.
- CompositesWorlds. 2017. “NASA Exploring Using Carbon Nanotube for Aerospace Application.” CompositesWorlds, May
- Das, T. K., and S. Prusty. 2013. “Graphene- Based Polymer Composites and Their Applications.” Polymer-Plastics Technology and Engineering 52 (4): 319–331. [Online]. doi:https://doi.org/10.1080/03602559.2012.751410.
- Gouzman, I., E. Grossman, R. Verker, N. Atar, A. Bolker, and N. Eliaz. 2019. “Advances in Polyimide-Based Materials for Space Applications.” Advanced Materials 31: 1807738. doi:https://doi.org/10.1002/adma.201807738.
- Guedes, J. F., M. S. S. Martins, R. Martins, and N. Rocha. 2019. “Carbon Nanotube Layer for Reduction of Fiber Print-Through in Carbon Fiber Composites.” Advances in Polymer Technology: 11. Article ID 6520972. Accessed 12 June 2019. doi:https://doi.org/10.1155/2019/6520972.
- Indian Remote Sensing Missions & Payloads. 2018. “A Glance, Space Science and Ground Segment Section IRS & SSS PROGRAM MANAGEMENT OFFICE.” Doc No: ISRO-ISAC-TR-1445, January
- Jia, L.-C., Z.-H. Jiao, D.-X. Yan, and Z.-M. Li. 2017. “Octadecylamine-Grafted Graphene Oxide Helps the Dispersion of Carbon Nanotubes in Ethylene Vinyl Acetate.” Polymers 9: 397. doi:https://doi.org/10.3390/polym9090397.
- Kumar, D. B., and G. Popli. 2015. “Carbon Nanotubes and Its Applications: A Review.” International Journal for Research in Applied Science & Engineering Technology 3 (VII). [Online]. http://www.ijraset.com
- Lonjon, A., P. Demont, E. Dantras, and C. Lacabanne. 2012. “Electrical Conductivity Improvement of Aeronautical Carbon Fiber Reinforced Polyepoxy Composites by Insertion of Carbon Nanotubes.” Journal of Non-Crystalline Solids 358: 1859–1862. Accessed August 2012. [Online]. doi:https://doi.org/10.1016/j.jnoncrysol.2012.05.038.
- Martins, M., R. Gomes, L. Pina, C. Pereira, O. Reichmann, D. Teti, N. Correia, and N. Rocha. 2018. “Highly Conductive Carbon Fiber-Reinforced Polymer Composite Electronic Box: Out-of-Autoclave Manufacturing for Space Applications.” Fibers 6: 92. doi:https://doi.org/10.3390/fib604009.
- Mehdipou, A. 2011. “Advanced Carbon Fiber Composite Materials for Shielding and Antenna Applications.” a thesis in the Department of Electrical and Computer Engineering, May.
- Nicoletto, M., D. Boschetti, M. Giorcelli, and P. Savi. 2015. “MWCNTs Nanocomposites for Space Applications.” (August). [Online]. https://www.researchgate.net/publication/283343810
- Pozegic, T. R., J. V. Anguita, I. Hamerton, K. D. G. I. Jayawardena, J.-S. Chen, V. Stolojan, P. Ballocchi, et al. 2016. “Multi-Functional Carbon Fibre Composites Using Carbon Nanotubes as an Alternative to Polymer Sizing.” Scientific Reports 6 :37334. doi:https://doi.org/10.1038/srep37334.
- Prabhakaran, R. 2015. “Nano-composites for Space Applications.” [online]. https://www.researchgate.net/publication/275020661
- Rawal, S., J. Brantle, and N. Karabudak. 2013. “Development of Carbon Nanotubebased Composite for Spacecraft Component.” [Online], June. https://www.researchgate.net/publication/261493461
- Roy, S., R. S. Petrova, and S. Mitra. 2018. “Effect of Carbon Nanotube (CNT) Functionalization in Epoxy CNT Composites.” Nanotechnology Reviews 7 (6): 475–485. [online]. doi:https://doi.org/10.1515/ntrev20180068.
- Samareh, J. A., and E. J. Siochi. 2017. “Systems Analysis of Carbon Nanotubes: Opportunities and Challenges for Space Applications.” Nanotechnology 28 (37): 372001. Accessed January 2017. doi:https://doi.org/10.1088/1361-6528/aa7c5a.
- Singer, G., H. Rennhofer, G. Sinn, M. M. Unterlass, J. Wendrinsky, U. Windberger, and H. C. Lichtenegger. 2017. “Processing of Carbon Nanotubes and Carbon Nanofibers Towards High Performance Carbon Fiber Reinforced Polymers.” Key Engineering Materials 742 (July): 31–37. ISSN: 1662-9795. Accessed July 2017. http://www.www.scientific.net doi:https://doi.org/10.4028/KEM.742.31.
- Space Applications Centre SAC –ISRO. 2016. “Design Review Documents GEOSAT & Remote Sensing Payloads.”
- Tariq, F., M. Shifa, M. Tariq, S. Kazim Hasanand, and R. A. Baloch.2015. “Hybrid Nanocomposite Material for EMI Shielding in Spacecrafts.” Advanced Materials Research 1101: 46–50. [Online]. Accessed 6 January 2015. https://www.scientific.net doi:https://doi.org/10.4028/AMR.1101.46.
- Vartak, D. A. 2014. “Failure Analysis of MIC Substrate for Satellite Communication Payloads and Possible Solutions.” MTech. Indus University, Ahmedabad, India.
- Zhang, W., H. Xiong, S. Wang, M. Li, and Y. Gu. 2015. “Electromagnetic Characteristics of Carbon Nanotube Film Materials.” Chinese Journal of Aeronautics 28: 1245–1254. [online]. doi:https://doi.org/10.1016/j.cja.2015.05.002.