Effect of adding TiO₂ nanoparticles on the impact toughness for welding joints of mild steel

References

• American, A., and N. Standard 2007. Standard Methods for Mechanical Testing of Welds.
   Google Scholar
• AWS board of directors. (2003). Specification for carbon steel electrodes for shielded metal arc welding. American National standards institute. American Welding Society Inc. USA
   Google Scholar
• Babu, S. S. 2004. “The Mechanism of Acicular Ferrite in Weld Deposits.” Current Opinion in Solid State and Materials Science 8 (3–4): 267–278. doi:10.1016/j.cossms.2004.10.001.
   Web of Science ®Google Scholar
• Byun, J. S., J. H. Shim, and Y. W. Cho. 2003. “Influence of Mn on Microstructural Evolution in Ti-killed C–Mn Steel.” Scripta Materialia 48 (4): 449–454. doi:10.1016/S1359-6462(02)00437-2.
   Web of Science ®Google Scholar
• Byun, J. S., J. H. Shim, J. Y. Suh, Y. J. Oh, Y. W. Cho, J. D. Shim, and D. N. Lee. 2001. “Inoculated Acicular Ferrite Microstructure and Mechanical Properties.” Materials Science and Engineering: A 319: 326–331. doi:10.1016/S0921-5093(00)02014-1.
   Web of Science ®Google Scholar
• Diaz-Fuentes, M., A. Iza-Mendia, and I. Gutierrez. 2003. “Analysis of Different Acicular Ferrite Microstructures in Low-carbon Steels by Electron Backscattered Diffraction. Study of Their Toughness Behavior.” Metallurgical and Materials Transactions A 34 (11): 2505–2516. doi:10.1007/s11661-003-0010-7.
   Google Scholar
• Fattahi, M., N. Nabhani, M. R. Vaezi, and E. Rahimi. 2011. “Improvement of Impact Toughness of AWS E6010 Weld Metal by Adding TiO2 Nanoparticles to the Electrode Coating.” Materials Science and Engineering: A 528 (27): 8031–8039. doi:10.1016/j.msea.2011.07.035.
   Web of Science ®Google Scholar
• Gianetto, J. A., N. J. Smith, J. T. McGrath, and J. T. Bowker. 1992. “Effect of Composition and Energy Input on Structure and Properties of High-strength Weld Metals.” Welding Journal-new York- 71: 407–s.
   Web of Science ®Google Scholar
• Gourgues, A.-F., H. M. Flower, and T. C. Lindley. 2000. “Electron Backscattering Diffraction Study of Acicular Ferrite, Bainite, and Martensite Steel Microstructures.” Materials Science and Technology 16 (1): 26–40. doi:10.1179/026708300773002636.
   Web of Science ®Google Scholar
• Grong, O., T. A. Siewert, G. P. Martins, and D. L. Olson. 1986. “A Model for the Silicon-manganese Deoxidation of Steel Weld Metals.” Metallurgical and Materials Transactions A 17 (10): 1797–1807. doi:10.1007/BF02817277.
   Web of Science ®Google Scholar
• Hofmann, H. 2009. “Advanced Nanomaterials, Course Support.” Powder technology laboratory, IMX, EPFL.
   Google Scholar
• Kiviö, M., L. Holappa, and T. Iung. 2010. “Addition of Dispersoid Titanium Oxide Inclusions in Steel and Their Influence on Grain Refinement.” Metallurgical and Materials Transactions B 41 (6): 1194–1204. doi:10.1007/s11663-010-9416-y.
   Web of Science ®Google Scholar
• Nedjad, S. H., and A. Farzaneh. 2007. “Formation of Fine Intragranular Ferrite in Cast Plain Carbon Steel Inoculated by Titanium Oxide Nanopowder.” Scripta Materialia 57 (10): 937–940. doi:10.1016/j.scriptamat.2007.07.016.
   Web of Science ®Google Scholar
• Pal, T. K., and U. K. Maity. 2011. “Effect of Nano Size TiO2 Particles on Mechanical Properties of AWS E11018M Type Electrode.” Materials Sciences and Applications 2 (9): 1285. doi:10.4236/msa.2011.29173.
   Google Scholar
• Por chelvan. https://www.academia.edu/4225801/PREPARATION_AND_ESTIMATION_OF_NANOFLUID,2015
   Google Scholar
• Ramkumar, K. R., and S. Natarajan. 2018. “Investigations on Microstructure and Mechanical Properties of TiO2 Nanoparticles Addition in Al 3003 Alloy Joints by Gas Tungsten Arc Welding.” Materials Science and Engineering: A 727: 51–60. doi:10.1016/j.msea.2018.04.111.
   Web of Science ®Google Scholar
• Roy, J., R. N. Rai, and S. C. Saha. 2018. “Effect of TiO2 Enriched Fluxes on the Bead Geometry, Grain Size and Hardness in Submerged Arc Welds.” International Journal of Materials and Product Technology 56 (4): 313–325. doi:10.1504/IJMPT.2018.092073.
   Web of Science ®Google Scholar
• St-Laurent, S., and G. L’Espérance. 1992. “Effects of Chemistry, Density and Size Distribution of Inclusions on the Nucleation of Acicular Ferrite of C-Mn Steel Shielded-metal-arc-welding Weldments.” Materials Science and Engineering: A 149 (2): 203–216. doi:10.1016/0921-5093(92)90381-A.
   Web of Science ®Google Scholar
• Wetzel, B., P. Rosso, F. Haupert, and K. Friedrich. 2006. “Epoxy Nanocomposites–fracture and Toughening Mechanisms.” Engineering Fracture Mechanics 73 (16): 2375–2398. doi:10.1016/j.engfracmech.2006.05.018.
   Web of Science ®Google Scholar
• Yang, J., S. Mei, and J. M. Ferreira. 2001. “Hydrothermal Synthesis of Nanosized Titania Powders: Influence of Tetraalkyl Ammonium Hydroxides on Particle Characteristics.” Journal of the American Ceramic Society 84 (8): 1696–1702. doi:10.1111/j.1151-2916.2001.tb00901.x.
   Web of Science ®Google Scholar
• Zhang, D., H. Terasaki, and Y. I. Komizo. 2010. “In Situ Observation of the Formation of Intragranular Acicular Ferrite at Non-metallic Inclusions in C–Mn Steel.” Acta Materialia 58 (4): 1369–1378. doi:10.1016/j.actamat.2009.10.043.
   Web of Science ®Google Scholar
• Zhang, R., and L. Gao. 2001. “Effect of Peptization on Phase Transformation of TiO2 Nanoparticles.” Materials Research Bulletin 36 (11): 1957–1965. doi:10.1016/S0025-5408(01)00674-2.
   Web of Science ®Google Scholar