174
Views
1
CrossRef citations to date
0
Altmetric
Research Article

Design and experimental investigation of an internal mixing twin-fluid atomiser for the generation of test aerosol particles

, ORCID Icon, ORCID Icon, , , & show all
Pages 73-84 | Received 05 May 2020, Accepted 23 Aug 2020, Published online: 23 Oct 2020

References

  • Arefin, A. M. E., M. H. Masud, M. U. H. Joardder, and M. S. Akhter. 2017. “A Monodisperse-aerosol Generation System: Design, Fabrication and Performance.” Particuology 118-125, doi: 10.1016/j.partic.2017.03.005.
  • Ashgriz, N. 2011. Handbook of Atomization and Sprays. Vol. 11. New York: Springer.
  • Barroso, J., A. Lozano, F. Barreras, and E. Lincheta. 2014. “Analysis and Prediction of the Spray Produced by an Internal Mixing Chamber Twin-fluid Nozzle.” Fuel Processing Technology 128: 1–9. doi:10.1016/j.fuproc.2014.06.027.
  • Broniarz-Press, L., M. Ochowiak, J. Rozanski, and S. Woziwodzki. 2009. “The Atomization of Water–Oil Emulsions.” Experimental Thermal and Fluid Science 33 (6): 955–962. doi:10.1016/j.expthermflusci.2009.04.002.
  • Broniarz-Press, L., M. Ochowiak, J. Różański, W. Szaferski, and S. Woziwodzki. 2010. The Gas-Liquid–Liquid Three-Phase Flow in the Spray Nozzles. Publ. House Pozn. Univ. Technol. Poznań.
  • Broniarz-Press, L., T. R. Sosnowski, M. Matuszak, M. Ochowiak, and K. Jabłczyńska. 2015. “The Effect of Shear and Extensional Viscosities on Atomization of Newtonian and non-Newtonian Fluids in Ultrasonic Inhaler.” International Journal of Pharmaceutics 485 (1): 41–49. doi:10.1016/j.ijpharm.2015.02.065.
  • Crowe, C. T. 2005. Multiphase Flow Handbook. Vol. 59.  Boca Raton (Florida): CRC press.
  • Esfarjani, S. A., and A. Dolatabadi. 2009. “A 3D Simulation of Two-phase Flow in an Effervescent Atomizer for Suspension Plasma Spray.” Surface and Coatings Technology 203 (15): 2074–2080. doi:10.1016/j.surfcoat.2008.10.024.
  • García, J. A., A. Lozano, J. Alconchel, E. Calvo, F. Barreras, and J. L. Santolaya. 2017. “Atomization of Glycerin with a Twin-fluid Swirl Nozzle.” International Journal of Multiphase Flow 92 (June): 150–160. doi:10.1016/j.ijmultiphaseflow.2017.03.010.
  • Hashiguchi, K., F. Yamane, H. Fujii, K. Sato, and K. Nishida. 2019. “Development of Internal-mixing Twin-fluid Atomizer with Multiple Exit Ports for Heavy Oil-fired Boilers.” Atomization and Sprays 29 (2): 161–176. doi:10.1615/AtomizSpr.2019029456.
  • Hede, P. D., P. Bach, and A. D. Jensen. 2008. “Two-fluid Spray Atomisation and Pneumatic Nozzles for Fluid Bed Coating/agglomeration Purposes: A Review.” Chemical Engineering Science 63 (14): 3821–3842. doi:10.1016/j.ces.2008.04.014.
  • Huang, X., X. S. Wang, and G. X. Liao. 2011. “Characterization of an Effervescent Atomization Water Mist Nozzle and Its Fire Suppression Tests.” Proceedings of the Combustion Institute 33 (2): 2573–2579. doi:10.1016/j.proci.2010.06.001.
  • Jolodar, A. J., M. M. Akbarnejad, M. Taghizadeh, and M. A. Marvast. 2005. “Laser-based Flow Measurement in Performance Assessment of FCC Atomizer.” Chemical Engineering Journal 108 (1): 109–115. doi:10.1016/j.cej.2005.01.009.
  • Karnawat, J., and A. Kushari. 2006. “Controlled Atomization Using a Twin-fluid Swirl Atomizer.” Experiments in Fluids 41 (4): 649. doi:10.1007/s00348-006-0191-0.
  • Krawczyk, P., and K. Badyda. 2014. “Numerical Analysis of the Impact of Parameters of Urea Solution Injection on Reajent Penetration inside the Combustion Chamber of a WR 25 Boiler.” Rynek Energii 6 (115): 139–145.
  • Lal, S., A. Kushari, M. Gupta, J. C. Kapoor, and S. Maji. 2010. “Experimental Study of an Air Assisted Mist Generator.” Experimental Thermal and Fluid Science 34 (8): 1029–1035. doi:10.1016/j.expthermflusci.2010.03.006.
  • Lefebvre, A. 1988. Atomization and Sprays. Vol. 1040, no. 2756. CRC press
  • Lefebvre, A. H. 1996. “Some Recent Developments in Twin‐fluid Atomization.” Particle & Particle Systems Characterization 13 (3): 205–216. doi:10.1002/ppsc.19960130307.
  • Lefebvre, A. H. 2014. “A Novel Method of Atomization with Potential Gas Turbine Applications.” Defence Science Journal 38 (4): 353–362. doi:10.14429/dsj.38.5869.
  • Li, S. Y., X. Y. Yang, C. Fu, T. Y. Li, and Y. Gao. 2018. “Experimental Investigation on Near-field Breakup Characteristics of Hybrid-mixed Twin-fluid Atomizer.” Atomization and Sprays 28 (10): 901–914. doi:10.1615/AtomizSpr.2018027298.
  • Liu, H. 1999. Science and Engineering of Droplets:: Fundamentals and Applications. Norwich, New York, USA: William Andrew.
  • Liu, H.-F., W.-F. Li, X. Gong, X.-K. Cao, J.-L. Xu, X.-L. Chen, Y.-F. Wang et al. 2006. “Effect of Liquid Jet Diameter on Performance of Coaxial Two-fluid Airblast Atomizers.” Chemical Engineering and Processing: Process Intensification 45 (4): 240–245. doi:10.1016/j.cep.2005.08.003.
  • Loebker, D. W., and H. L. Empie Jr. 1998. Effervescent Spraying: A New Approach to Spraying High Solids Black Liquor.
  • Mansour, A., and N. Chigier. 1995. “Air-blast Atomization of non-Newtonian Liquids.” Journal of Non-Newtonian Fluid Mechanics 58 (2–3): 161–194. doi:10.1016/0377-0257(95)01356-Z.
  • Masud, M. H., M. Mourshed, A. M. E. Arefin, M. T. Islam, and M. S. Akhter. 2018. “Inhalation Risk of Indoor Aerosol Spray Products Commercially Available in Bangladesh.” International Journal of Environmental Studies 75 (5, September): 732–739. doi:10.1080/00207233.2018.1440104.
  • Masud, M. H., M. M. Noor, and M. S. Akhter. 2014. “Design and Construction of a Wind Tunnel with Microcontroller Based Isokinetic Probe for Sampling Aerosol Particle.” Global Journal of Research in Engineering 13: 10.
  • Murugan, R., P. S. Kolhe, and K. C. Sahu. 2020. “A Combined Experimental and Computational Study of Flow-blurring Atomization in A Twin-fluid Atomizer.” European Journal of Mechanics - B/Fluids 84 (July): 528–541. doi:10.1016/j.euromechflu.2020.07.008.
  • Murugan, R., S. Balusamy, and P. Kolhe. 2020. “Experimental Study of Liquid Spray Mode of Twin Fluid Atomizer Using Optical Diagnostic Tool.” Flow, Turbulence and Combustion 1–29. July. d o i:1 0.1 007/s10494-020-00195-1.
  • Ochowiak, M. 2013. “The Experimental Study on the Viscosity Effect on the Discharge Coefficient for Effervescent Atomizers.” Experimental Thermal and Fluid Science 50: 187–192. doi:10.1016/j.expthermflusci.2013.06.008.
  • Ochowiak, M., M. Matuszak, S. Włodarczak, A. Krupińska, M. Markowska, A. Gościniak, T. Szulc, et al. 2018. “The Concept Design and Study of Twin-fluid Effervescent Atomizer with Air Stone Aerator.” Chemical Engineering and Processing - Process Intensification 124: 24–28. February. doi:10.1016/j.cep.2017.11.020.
  • Pougatch, K., M. Salcudean, and J. McMillan. 2014. “Influence of Mixture Non-uniformity on the Performance of an Effervescent Nozzle.” Fuel 116: 601–607. doi:10.1016/j.fuel.2013.08.050.
  • Qian, L., J. Lin, and H. Xiong. 2011. “Modeling of non-Newtonian Suspension Plasma Spraying in an Inductively Coupled Plasma Torch.” International Journal of Thermal Sciences 50 (8): 1417–1427. doi:10.1016/j.ijthermalsci.2011.03.024.
  • Ramesh, N. R., K. Sridhara, and R. Natarajan. 1985. “Studies on the Atomization and Combustion Performance of a Twin-fluid Acoustic Atomizer.” Fuel 64 (12): 1677–1680. doi:10.1016/0016-2361(85)90393-X.
  • Risberg, M., and M. Marklund. 2009. “Visualizations of Gas-assisted Atomization of Black Liquor and Syrup/water Mixtures at Elevated Ambient Pressures.” Atomization and Sprays 957-967, D O I: 1 0.1 615/AtomizSpr.v19.i10.40.
  • Sato, K., K. Okiura, K. Shoji, and Y. Takahashi. 1991. “Spray Characteristics of CWM by a Pneumatic Internal Mixing Atomizer.” Journal of the Fuel Society of Japan 70 (11, November): 1067–1074. doi:10.3775/jie.70.11_1067.
  • Sato, K., K. Oklura, K. Shoji, I. Akiyama, and F. Funazaki. 1988. “A Study on the Optimum Atomizing Conditions of Twin-fluid Atomizers.” Transactions of the Japan Society of Mechanical Engineers Series B 54 (506, October): 2935–2940. doi:10.1299/kikaib.54.2935.
  • Schröder, J., A. Kleinhans, Y. Serfert, S. Drusch, H. P. Schuchmann, and V. Gaukel. 2012. “Viscosity Ratio: A Key Factor for Control of Oil Drop Size Distribution in Effervescent Atomization of Oil-in-water Emulsions.” Journal of Food Engineering 111 (2): 265–271. doi:10.1016/j.jfoodeng.2012.02.023.
  • Sen Guan, H., G. X. Li, and N. Y. Zhang. 2018. “Experimental Investigation of Atomization Characteristics of Swirling Spray by ADN Gelled Propellant.” Acta Astronautica 144 (December 2017): 119–125. doi:10.1016/j.actaastro.2017.12.015.
  • Sosnowski, T. R., and J. Żołądkowicz. 2011. “Charakterystyka Procesu Atomizacji Cieczy W Układach Z Wibrującą Membraną (VM) Stosowanych W Wybranych Inhalatorach Medycznych.” Inż Ap Chem 50: 100–101.
  • Sovani, S. D., P. E. Sojka, and A. H. Lefebvre. 2001. “Effervescent Atomization.” Progress in Energy and Combustion Science 27 (4): 483–521. doi:10.1016/S0360-1285(00)00029-0.
  • Tamaki, N., M. Shimizu, and H. Hiroyasu. 2005. “Atomization of High-Viscous Liquid Jet by Internal Mixing Twin-Fluid Atomizer.” Transactions of the Japan Society of Mechanical Engineers Series B 71 (712, December): 3017–3024. doi:10.1299/kikaib.71.3017.
  • Tsai, S. C., and B. Viers. 1990. “Airblast Atomization of Viscous Liquids.” Fuel 69 (11): 1412–1419. doi:10.1016/0016-2361(90)90123-8.
  • Wade, R. A., J. M. Weerts, J. P. Gore, and W. A. Eckerle. 1999. “Effervescent Atomization at Injection Pressures in the MPa Range.” Atomization and Sprays 651-667, D O I: 1 0.1 615/AtomizSpr.v9.i6.50.
  • Wrzesińska, B., R. Krzywda, T. Wąsowski, P. Krawczyk, and K. Badyda. 2015. “Technologia Selektywnej Niekatalitycznej Redukcji Tlenków Azotu Pod Kątem Zastosowania Jej W Kotłach Dla Energetyki Przemysłowej I Ciepłownictwa.” Przemysł Chemiczny 94 (4): 608–613.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.