Characteristics of Thermally Sprayed Alumina-Titania Ceramic Coatings obtained from Conventional and Nanostructured Powders - A Review

References

• Akella Srikanth, G., B. B. Mohammed Thalib., and Venkateshwarlu B. 2020. „A Brief Review on Cold Spray Coating Process „, Materials Today: Proceedings.” 22 (4): 1390–1397.
   Google Scholar
• Amin, S., and A. Hemant Panchal. 2016. “Review on Thermal Spray Coating Process.” International Journal of Current Trends in Engineering and Research Vol.2 (Issue 4): pp.556–563.
   Google Scholar
• Ananthapadmanabhana, P. V., T. K. Thiyagarajana, K. P. Sreekumara, R. U. Satputea, N. Venkatramania, and K. Ramachandran. 2003. “Co-spraying of Alumina– Titania: Correlation of Coating Composition and Properties with Particle Behaviour in the Plasma Jet.” Surface & Coatings Technology Volume168 (2–3): p.231–240. doi:10.1016/S0257-8972(03)00006-9.
   Web of Science ®Google Scholar
• Ariharan, S., N. Ambreen Nisar, S. T. Balaji, and K. B. Aruna. 2017. “Carbon Nanotubes Stabilize High Temperature Phase and Toughen Al2O3-based Thermal Barrier Coatings.” Composites Part B 124: 76–87. doi:10.1016/j.compositesb.2017.05.032.
   Web of Science ®Google Scholar
• Asgarzadeh, H., S.-H. Joo, and H. S. Kim. 2014. “Consolidation of Carbon Nanotube Reinforced Aluminum Matrix Composites by High-pressure Torsion”. Metallurgical and Materials Transactions no. 9. doi:10.1007/s11661-0140235406.
   Web of Science ®Google Scholar
• Asgharzadeh, H. S., and Kim. 2017. “Microstructure and Mechanical Properties of Al-2vol% CNT Nanocomposites Processed by High Pressure Torsion.” Archives of Metallurgy and Materials 62 (2B): 1109–1112. doi:10.1515/amm-2017-0161.
   Google Scholar
• Asiq Rahman, O. S., S. Mathiyalagan, B. Mukherjee, and T. Laha. 2017. “Synergistic Effect of Hybrid Carbon Nanotube and Graphene Nanoplatelets Reinforcement on Processing, Microstructure, Interfacial Stress and Mechanical Properties of Al2O3 Nanocomposites.” Ceramics International 10.160. https://doi.org/10.1016/j.ceramint.2017.
   Google Scholar
• Bagde, P., S. G. Sapate., R. K. Khatrikar., and N. Vashishta. 2018. “Friction and Abrasive Wear Behavior of Al2O3-13wt%TiO2+Ni Graphite Coatings.” Tribology International 121: 353–372. doi:10.1016/j.triboint.2018.01.067.
   Web of Science ®Google Scholar
• Balan, K. N., T. N. Valarmathi, A. Nuttaki, V. R. Arani Sai, K. M. K. S. Jammalamadaka, and M. A. Natahanael. 2016. “A Study of Thermal Spray Coated Surface with Nano Composite Powder of CNT+WC14Co, IOP Conf. Series.” Materials Science and Engineering 149. 012097.
   Google Scholar
• Balani, K., and A. Agarwal. 2008. “Process Map for Plasma Sprayed Aluminum Oxide-Carbon Nanotube Nanocomposite Coatings.” Journal of Surface and Coatings. Technology 202 (17): 4270–4277. doi:10.1016/j.surfcoat.2008.03.024.
   Web of Science ®Google Scholar
• Ben Ghorbal, G., A. Tricoteaux, A. Thuault, H. Ageorges, F. Roudet, and D. Chicot. 2020. “Mechanical Properties of Thermally Sprayed Porous Alumina Coating by Vicker’s and Knoop Indentation”. Ceramics International no. 12. doi:10.1016/j.ceramint.2020.05.039.
   Web of Science ®Google Scholar
• Benea, M. L., and L. P. Benea. ““Characterisation of the TiO2 Coatings Deposited by Plasma Spraying”, International Conf. On Applied Sciences 2015, IOP Conf.series: Materials Science and Engineering”. Vol.106. 2016. page. 012024, doi:10.1088/1757-899x/106/1/012024
   Google Scholar
• Berger, L.-M., K. Sempf, Y. J. Sohn, and R. Yaben. 2018. “Influence of Feedstock Powder Modification by Heat Treatments on the Properties of APS-Sprayed Al2O3-40wt%TiO2 Coatings.” Journal of Thermal Spray Technology 27 (4): 654–666. doi:10.1007/s11666-018-0716-0.
   Web of Science ®Google Scholar
• Bo, L., J. Jia, M. Han, Y. Gao, W. Wang, and L. Cong. 2017. “Microstructure, Mechanical and Tribological Properties of Plasma-sprayed NiCrAlY-Mo-Ag Coatings from Conventional and Nanostructured Powders „, Surface & Coatings Technology.” Vol.324: 552–559.
   Google Scholar
• Bolelli, G., V. Cannillo, L. Lusvarghi, and T. Manfredini. 2006. “Wear Behaviour of Thermally Sprayed Ceramic Oxide Coatings.” Wear Vol.261 (11–12): 1298–1315. doi:10.1016/j.wear.2006.03.023.
   Web of Science ®Google Scholar
• Bolleddu, V., V. Racherla, and P. P. Bandhyopadyay. 2014. “Mechanical and Tribological Characterization of Air Plasma Sprayed Nanostructured Alumina-Titania Coatings Deposited with Nitrogen and Argon as Primary Plasma Gases.” Materials & Design 59: 252–263. doi:10.1016/j.matdes.2014.02.040.
   Web of Science ®Google Scholar
• Budinski, K. G. 1988. Surface Engg. For Wear Resistance. Publisher: Englewood Cliffs, N.J., USA.
   Google Scholar
• Cem, O. S. 2005. “Microstructural and Mechanical Characterization of Plasma Sprayed Al2O3 – TiO2 Composite Ceramic Coating on Mo/cast Iron Substrates.” Materials Letters Volume59: p. 2314–3220.
   Google Scholar
• Chellaganesh, D., M. Adam Khan, and J. T. Winowlin Jappes. 2019. “High Temperature Oxidation Behavior of Thermally Sprayed Alumina-titania Coatings on Nickel Based Super-alloys.” Materials Research Express, IOP Publishing, Vol.6, No.8 MRX-113629.R2 doi:10.1088/2053-1591/ab1c39.
   Google Scholar
• Chen, Y.-D., and Y. Yang. 2018. “Hen-hua Chu, Xue-Guang Chen, Lei Wang, Zhe Liu, Microstructure and Properties of Al2O3-ZrO2 Composite Coatings Prepared by Air Plasma Spraying.” Applied Surface Science 431: 93–100. doi:10.1016/j.apsusc.2017.04.073.
   Web of Science ®Google Scholar
• Dejang, N., A. Watcharapasorn, S. Wirojupatump, P. Niranatlumpong, and S. Jiansirisomboon. 1651-1657. “Fabrication and Properties of Plasma-sprayed Al2O3/TiO2 Composite Coatings: A Role of Nano-sized TiO2 Addition.” Surface & Coatings Technology 204: 2010.
   Google Scholar
• Dhakar, B., S. Chatterjee, and K. Sabiruddin. 2016. “Measuring Mechanical Properties of Plasma-sprayed Coating by Nano-indentation Technique.” Materials Science and Technology. doi:10.1080/02670836.2016.1195643.
   Google Scholar
• Erfanifar, E., M. A. Raei, H. F. Nabavi, and A. S. Rouhaghadam. 2017. “Growth Kinetics and Morphology of Micro-arc Oxidation Coating on Titanium.” Surface & Coatings Technology doi:10.1016/j/surfcoat.2017.03.002.
   Web of Science ®Google Scholar
• GhobeitiHasab, M., and K. Rasnuei, “Comparison of Oxidation Resistance of YSZ and YSZ-Al2O3 Coating on Ni-based Super Alloy.” (2012), Scientific paper, Association of Metallurgical Engineers of Serbia. UDC: 667.613:621.791.48.
   Google Scholar
• Goyal, R., B. S. Sidhu, and V. Chawla. 2017. “Characterization of Plasma-sprayed Carbon Nanotube (CNT) Reinforced Alumina Coatings on ASME-SA213-T11 Boiler Tube Steel”. International Journal of Manufacturing Technology no. 9–12. doi:10.1007/s00170-017-0405.
   PubMed Web of Science ®Google Scholar
• Grimm, M., S. Conze, L.-M. Beger, G. Paczkowski, T. Lindner, and T. Lampke. 2020. “Microstructure and Sliding Wear Resistance of Plasma Sprayed Al2O3-Cr2O3-TiO2 Ternary Coatings from Blends of Single Oxides.” Coatings no. 6: 10,42. doi:10.3390/coatings10060560.
   Google Scholar
• Gualtieri, M. L., M. Prudenziati, and A. F. Gualtieri. 2006. “Quantitative Determination of the Amorphous Phase in Plasma Sprayed Alumina Coatings Using the Rietveld Method.” Surface &Coatings Technology 201 (6): 2984–2989. doi:10.1016/j.surfcoat.2006.06.009.
   Web of Science ®Google Scholar
• Guilemany, J. M., J. Nutting, and M. J. Dougan. 1997. “A Transmission Electron Microscopy Study of the Microstructures Present in Alumina Coatings Produced by Plasma Spraying.” Journal of Thermal Spray Technology 6 (4): 425–429. doi:10.1007/s11666-997-0025-5.
   Web of Science ®Google Scholar
• Hazra, S., K. Sabiruddin, and P. P. Bandyopadhyay. 2012. “Chrome Replacement Solution.” Surface Engineering 28 (1): 37–43. doi:10.1179/1743294410Y.0000000009.
   Web of Science ®Google Scholar
• Heiman, R. B. 1996. Plasma Spray Coating, Principle and Application. pp.100/104,164/167. Weinheim, Germany: VCH.
   Google Scholar
• Hou, G., A. Yulong, X. Zhao, H. Zhou, J. Chen, L. I. Shuangjian, X. Liu, and W. Deng. 2017. “Improving Interfacial Mechanical and Tribological Properties of Alumina Coatings on Al Alloy by Plasma Arc Heat-treatment of Susbtrate.” Applied Surface Science 411: 53–66. doi:10.1016/j.apsusc.2017.03.170.
   Web of Science ®Google Scholar
• Ibrahim, A., Z. A. Hamid, and A. A. Aal. 2010. “Investigation of Nanostructured and Conventional Alumina-titania Coatings Prepared by Air Plasma Spray Process.” Material Science and Engineering A Vol. 527 (No. 1): pp. 663–668. doi:10.1016/j.msea.2009.08.054.
   Google Scholar
• Jambagi, S. C. 2017. “Scratch Adhesion Strength of Plasma Sprayed Carbon Nanotube Reinforced Ceramic Coatings.” Journal of Alloys and Compounds 728: 126–137. doi:10.1016/j.jallcom.2017.08.262.
   Web of Science ®Google Scholar
• Jambagi, S. C., A. Agarwal, N. Sarkar, and P. P. Bandyopadhyay. 2018. “Plasma-sprayed Ti and Al Coatings Obtained from Feedstocks Prepared by Heterocoagulation with 1wt% of CNT.” Journal of Materials Engineering and Performance Vol.27 (5): pp.2364–2372. doi:10.1007/s11665-018-3319-5.
   Web of Science ®Google Scholar
• Jambagi, S. C., and P. P. Bandyopadhyay. 2017. “Plasma Sprayed Carbon Nanotube Reinforced Splats and Coatings.” Journal of the European Ceramic Society 37 (5): 2235–2244. doi:10.1016/j.jeurceramsoc.2017.01.028.
   Web of Science ®Google Scholar
• Jambagi, S. C., S. Kar, P. Brodard, and P. P. Bandyopadhyay. 2016. “Characteristics of Plasma Sprayed Coatings Produced from Carbon Nanotube Doped Ceramic Powder Feedstock.” Materials & Design 112: 392–401. doi:10.1016/j.matdes.2016.09.095.
   Web of Science ®Google Scholar
• Jambagi, S. C., and P. P. B. Nilmoni Sarkar. 2015. “Preparation of Carbon Nanotube Doped Ceramic Powders for Plasma Spraying Using Heterocoagulation Method.” Journal of the European Ceramic Society 35: 989–1000.
   Web of Science ®Google Scholar
• Jaworski, R., L. Pawlowski, F. Roudet, S. Kozerski, and F. Petit. 2008. “Characterization of Mechanical Properties of Suspension Plasma Sprayed TiO2 Coatings Using Scratch Test.” Surface & Coatings Technology 202 (12): 2644–2653. doi:10.1016/j.surfcoat.2007.09.044.
   Web of Science ®Google Scholar
• Jia, S., W. Zehua, S. Liqiong, Z. Zehua, X. Zhang, S. Jiang, and W. Gang. 2019. “The Effect of Sealing Process on the Corrosion Behavior of Al2O3-13wt%TiO2 Coating.” Ceramics Silikaty 63 (2): 185–193.
   Google Scholar
• Jose, R., B. Tavares, G. Robert, S. Sampath, C. B. Christopher, and H. Herman. 2004. “Solid Particle Erosion of Plasma Sprayed Ceramic Coatings .” Materials Research 7 (1): 147–153. doi:10.1590/S1516-14392004000100020.
   Google Scholar
• Kang, J., B. Xu, and C. Wang. 2014. “Influence of Contact Stress on Rolling Contact Fatigue Composite Ceramic Coatings Plasma Sprayed on a Steel Roller.” Tribology International 73: 47–56. doi:10.1016/j.triboint.2013.12.019.
   Web of Science ®Google Scholar
• Keshri, A., D. Lahiri, and A. Agarwal. 2011. “Carbon Nanotubes Improve the Adhesion Strength of a Ceramic Splat to the Steel Substrate.” Carbon Vol.49 (13): 06.010. doi:10.1016/j.carbon.2011.06.010.
   Web of Science ®Google Scholar
• Khosravifard, A., E. Salahinejad, A. H. Yaghtin, A. Araghi, and A. Akhbarizadeh. 2015. “Tribochemical Behavior of Alumina Coatings Deposited by High-velocity Oxy Fuel Spraying.” Ceramics International 41 (4): 5713–5720. doi:10.1016/j.ceramint.2015.01.002.
   Web of Science ®Google Scholar
• Kim, G. E., B. R. Marple, M. M. Hyland, Y. C. Lau, R. S. Lima, and J. Voyer. 2006. “Proven and Promising Applications of Thermal Sprayed Nanostructured Coatings.” Proceedings of the International Thermal Spray Conference (2006). 15-18May2006
   Google Scholar
• Knotek, O., and R. F. Bhushah, Eds. 2001. Handbook of Hard Coatings Deposition Technologies, Properties and Applications. page.92.Nayes Publications, Park Ridge New Jersey, USA, William Andrew Publishing, LLC, Norwich, New York, USA, ISBN: 0-8155-1438-7.
   Google Scholar
• Latka, L., M. Szala, M. Michalak, and T. Palka, “Impact of Atmospheric Plasma Spray Parameters on Cavitation Erosion Resistance of Al2O3-13%TiO2 Coatings.” Proceedings of the 12th International Conference Ion implantation and other applications of ions and Electrons, Kazimierz Dolny, Poland (2018). Acta Physica Polonica, Vol.136.
   Google Scholar
• Lehman, R. L. 1991. Overview of Ceramic Design and Process Engineering, Engineered Materials Handbook. 29–37. Vol. 4. Ceramic and Glasses, S.J. Schneider, Ed., ASM International.
   Google Scholar
• Lima, R., and B. Marple. 2005. “Superior Performance of High-Velocity Oxyfuel-Sprayed Nanostructured TiO2 in Comparison to Air Plasma-Sprayed Conventional Al2O3-13TiO2.” Journal of Thermal Spray Technology 14 (3): 397–404. doi:10.1361/105996305X59413.
   Web of Science ®Google Scholar
• Lima, R. S., and B. R. Marple. 2006. “From APS to HVOF Spraying of Conventional and Nanostructured Titania Feedstock Powders: A Study on the Enhancement of the Mechanical Properties.” Surface & Coatings Technology 200 (11): 3428–3437. doi:10.1016/j.surfcoat.2004.10.137.
   Web of Science ®Google Scholar
• Liscano, S., L. Gil, and M. H. Staia. 2004. “Effect of Sealing Treatment on the Corrosion Resistance of Thermal-Sprayed Ceramic Coatings.” Surface & Coatings Technology 188-189 (p): 135–139. doi:10.1016/j.surfcoat.2004.08.009.
   Google Scholar
• Little, R. L. 1979. Welding and Welding Technology. New Delhi, India: TMH Publications.
   Google Scholar
• Liu, J., M. J. Haixue Yan, and K. J. Reece. 2012. “Toughening of Zirconia/Alumina Composited by the Addition of Graphene Platelets, (2012).” Journal of the European Ceramic Society 32 (16): 4185–4193. doi:10.1016/j.jeurceramsoc.2012.07.007.
   Web of Science ®Google Scholar
• Longo, L. F. 1985. Thermal Spray Coatings. USA: ASM.
   Google Scholar
• Luo., H., P. Song., A. Khan., and Z. Feng. 2017a. “J.J, Xiong. X.P, Lu. J.G, Lu. J.S, Alternant Phase Distribution and Wear Mechanical Properties of a Al2O3-40wt% TiO2 Composite Coatings.” Ceramics International 43 (9): 7295–7304. doi:10.1016/j.ceramint.2017.03.029.
   Web of Science ®Google Scholar
• Luo., H., P. Song., A. Khan., J. Feng., J. J. Zang., X. P. Xiong., J. G. Lu., and J. S. Lu. 2017b. “Effects of Metal-ceramic Transition Region on the Mechanical Properties and Crack Propagation Behavior of an Al2O3-40wt%TiO2 Coatings.” Surface & Coatings Technology 321: 200–212. doi:10.1016/j.surfcoat.2017.04.058.
   Web of Science ®Google Scholar
• Macinauskas, L., J. S. Mathew, M. Milieska, M. Aikas, and M. Kalin. 2020. “Effect of Graphite Concentration on the Tribological Performance of Alumina Coatings.” Journal of Alloys and Compounds. doi:10.1016/j.jalcom.2020.154135.
   Web of Science ®Google Scholar
• Mahmood, I. A., W. W. Jameel, and LubnaAlaaKhaleel. 2013. “Improved Oxidation Resistance for Thermal Barrier Ceramic Coating Protect.” IJERT 1 (5): 77–86.
   Google Scholar
• Marra, F., L. Baiamonte, C. Bartuli, M. Valente, T. Valente, and G. Pulci. 2016. “Tribological Behavior or Alumina-Titania Nanostructured Coatings Produced by Air Plasma Spray Technique.” Chemical Engineering Transactions 47. doi:10.3303/CET1649013.
   Google Scholar
• Meringolo, V. 1983. Thermal Spray Coating. Atlanta, USA: Tappi Press.
   Google Scholar
• Michalak, M., L. Latka, and P. Solowski. 2019. “The Microstructure and Selected Mechanical Properties of Al2O3+3wt%TiO2 Plasma Sprayed Coatings.” Welding Technology Review 91: 6.
   Google Scholar
• Mindivan, H. 2018. “A Study on Wear and Corrosion Behavior of Thermally Sprayed Alumina-titania Composite Coatings on Aluminium Alloys.” Kovove Materialy Vol.48,203–210.
   Google Scholar
• Mizuta, H., K. Oda, Y. Shibasaki, M. Maeda, M. Michida, and K. Ohshima. 1992. “Preparation of High Strength and Translucent Alumina by Hot Isostatic Pressing.” Journal of American Ceramic Society 75 (2): pp. 469–473. doi:10.1111/j.1151-2916.1992.tb08203.x.
   Web of Science ®Google Scholar
• G. Mohammed Thalib Basha, Akella Srikanth, B. Venkateshwarlu. 2020. “A Critical Review on Nano Structured Coatings for Alumina-Titania (Al2o3-tio2) Deposited by Air Plasma Spraying Process (APS)”. Materials Today: Proceedings Volume 22 (Part 4): 1554–1562, 2214–7853.
   Google Scholar
• G. Mohammed Thalib Basha, Akella Srikanth, B. Venkateshwarlu. 2020. “A Critical Review on Nano Structured Coatings for Alumina-Titania (Al2o3-tio2) Deposited by Air Plasma Spraying Process (APS)”. Materials Today: Proceedings 20 (2): 191–194.
   Google Scholar
• Mukherjee, B., O. S. Asiq Rahman, M. Sribalaji, S. R. Bakshi, and A. K. Keshri. 2016. “Synergistic Effect of Carbon Nanotube as Sintering Aid and Toughening Agent in Spark Plasma Sintered Molybdenum Disilicide-hafnium Carbide Composite.” Materials Science Engineering A-Structural 678: 299–307.
   Web of Science ®Google Scholar
• Narulkar, V. V., S. Prakash, and K. Chandra. 2008. “Effect of Temperature on Tribological Properties of Al2O3-TiO2 Coating.” Defence Science Journal 58 (4): 582–587. doi:10.14429/dsj.58.1680.
   Web of Science ®Google Scholar
• Neumann, M., P. Gehoe, J. Kuebler, N. Dadivanyan, H. Jelitto, G. A. Schneider, and C. G. Aneziris. 2019. “Stable Crack Propagation in Free Standing Thermal Sprayed Al2O3 and Al2O3-ZrO2-TiO2 Coatings.” Ceramics International 45 (7): 8761–8766. doi:10.1016/j.ceramint.2019.01.200.
   Web of Science ®Google Scholar
• Peng-fei, H., H.-D. Wang, S.-Y. Chen, M. Guo-Zheng, M. Liu, Z.-G. Xing, Y.-W. Wang, S.-Y. Ding, D. Y. He., and X. Chen. 2019. “Interface Characterization and Scratch Resistance of Plasma Sprayed TiO2-CNTs Nano Composite Coating.” Journal of Alloys and Compounds doi:10.1016/j.jalcom.2019.15309.
   Web of Science ®Google Scholar
• Pengfie, H., M. Guozheng, H. Wang, Q. Yong, and S. Chne. 2016. “Microstructure and Mechanical Properties of a Novel Plasma-spray TiO 2 Coating Reinforced by CNTs.” Ceramic International 42 (11): 13319–13325. doi:10.1016/j.ceramint.2016.05.073.
   Web of Science ®Google Scholar
• Pfender, E. 1988. ““Fundamental Studies Associated with the Plasma Spray Process.”.” Surface &Coatings Technology Vol. 34 (1): 1. doi:10.1016/0257-8972(88)90083-7.
   Web of Science ®Google Scholar
• Pinzon, A. V., K. J. Urrego, A. Gonzalez-Hernandez, M. Rincon, and O. F. Vargas Galvis. 2018. “Corrosion Protection of Carbon Steel by Alumina-titania Ceramic Coatings Used for Industrial Applications”. Ceramics International no. 17. doi:10.1016/j.ceramint.2008.08.273.
   Web of Science ®Google Scholar
• Ramachandran, K., V. Selvarajan, P. V. Ananthapadmanabhan, and K. P. Sreekumar. 1998. “Microstructure, adhesion, Microhardness, Abrasive Wear Resistance of the Plasma Sprayed Alumina and Alumina – Titania Coatings.” Thin Solid Film Volume315 (1–2): p. 144–152. doi:10.1016/S0040-6090(97)00738-4.
   Google Scholar
• Richter, A., L. M. Berger, S. Conze, Y. J. Sohn, and R. Vaben. 2019a. “Emergence and Impact of Al2TiO5 in Al2O3-TiO2 APS Coatings”, IOP Conference Series: Materials Science and Engineering.” IOP Conf.ser. Mater.Sci.Eng no. 9: 480 012007. doi:10.1088/2515-7620/ab3d91.
   Google Scholar
• Richter, A., L.-M. Berger, Y. J. Sohn, S. Conze, K. Stempf, and R. Vaben. 2019b. “Impact of Al2O3-40wt%TiO2 Feedstock Powder Characteristics on the Sprayability, Microstructure and Mechanical Properties of Plasma Sprayed Coatings.” Journal of the European Ceramic Society 39 (16): 5391–5402. doi:10.1016/j.jeurceramsoc.2019.08.026.
   Web of Science ®Google Scholar
• Rico, A., J. Rodriguez, E. Otero, P. Zeng, and W. M. Rainforth. 2009. “Wear Behaviour of Nanostructured Alumina-titania Coatings Deposited by Atmospheric Plasma Spray.” Wear Vol. 267 (No. 1): pp. 1191–1197. doi:10.1016/j.wear.2009.01.022.
   Google Scholar
• Rosenflanz, A., M. Frey, B. Endres, T. Anderson, E. Richards, and C. Schardt. 2004. “Bulk Glasses and Ultra Hard Nanoceramic Based on Alumina and Rare-earth Oxides.” Nature 430 (7001): 761–764. doi:10.1038/nature02729.
   PubMed Web of Science ®Google Scholar
• Sabiruddin, K., J. Joardar, and P. P. Bandyopadhyay. 2010. “Analysis of Phase Transformation in Plasma Sprayed Alumina Coatings Using Rietveld Refinement.” Surface & Coatings Technology 204 (20): 3248–3253. doi:10.1016/j.surfcoat.2010.03.026.
   Web of Science ®Google Scholar
• Sanchez, E., E. Bannier, V. Cantavella, M. D. Salvador, E. Klyatskina, J. Morgiel, J. Grzonka, and A. R. Boccaccini. 2008. “Deposition of Al2O3-TiO2 Nanostructured Powders by Atmospheric Plasma Spraying.” Journal of Thermal Spray Technology 17 (3): 329–337. doi:10.1007/s11666-008-9181-5.
   Web of Science ®Google Scholar
• Santos, A., R. Guzman, and Z. Y. Ramirez. 2017. “Influence on the Wear Resistance of the Particle Size Used in Coatings of Alumina.” Journal of Physics Conference Series.786. 10.1088/1742-6596/786/1/012012
   Google Scholar
• Saremi, M., A. Afrasiabi, and A. Kobayashi. 2007. “Bond Coat Oxidation and Hot Corrosion Behavior of Plasma Sprayed YSZ Coting on Ni Superalloy.” Journal of Transaction of JWRI 36: 41.
   Google Scholar
• Sarkariya, O. 2005. “Effect of Some Parameters on Microstructure and Hardness of Alumina Coatings Prepared by the Air Plasma Spraying Process.” Journal of Surface and Coatings Technology 190 (2–3): 388–393. doi:10.1016/j.surfcoat.2004.02.007.
   Web of Science ®Google Scholar
• Sathis, S., and M. Geetha. 2016. “Comparative Study on Corrosion Behavior of Plasma Sprayed Al2O3,ZrO2, Al2O3/ZrO2 and ZrO2/Al2O3 Coatings.” Transactions of Non Ferrous Metals Society of China Vol. 26,Issue 5, 1336–1344, doi:10.1016/S1003-6326(16)64236-X.
   Google Scholar
• Shilpa, C., K. Mahesha, and K. B. S. Arjun Dey. 2019. “Damping Performance of Alumina and Zirconia-based Plasma Sprayed Coatings.” Surface Engineering , Vol.36, pp.1-6,1743–2944, doi:10.1080/02670844.2019.1662227.
   Web of Science ®Google Scholar
• Singh, L., and G. J. S. Chawla. 2012. “A Review on Detonation Gun Sprayed Coatings.” J. Minerals & Materials Charac. & Engg 11 (3): 243–265.
   Google Scholar
• Srikanth, A., and V. Bolleddu. 2020. “A Review on Characteristics of Cold Sprayed Coatings.” Australian Journal of Mechanical Engineering. doi:10.1080/14484846.2020.1794504.
   Web of Science ®Google Scholar
• Sure, J., A. C. Mallika, and U. Kamachi Mudaliar. 2016. “Corrosion Behavior of Laser Melted Alumina-40wt% Titania Coated High Density Graphite in Molten salt””. Transactions of the Indian Institute of Metals no. 9. doi:10.1007/s1266-015-0699-I.
   Web of Science ®Google Scholar
• Tekmen, C., Y. Tsunekawa, and M. Okumiya. 2008. “Effect of Plasma Spray Parameters on In-flight Particle Characteristics and In-situ Alumina Formation.” Surface & Coatings Technology 203 (3–4): 223–228. doi:10.1016/j.surfcoat.2008.08.057.
   Web of Science ®Google Scholar
• Thakare, J. G., R. S. Mulik, and M. M. Mahapatra. 2017. “Effect of Carbon Nanotubes and Aluminum Oxide on the Properties of a Plasma Sprayed Thermal Barrier Coating.” Ceramics International 44 (1): 438–451. doi:10.1016/j.ceramint.2017.09.196.
   Web of Science ®Google Scholar
• Tingaud., O., P. Bertrand., and G. Bertrand. 2010. “Microstructure and Tribological Behavior of Suspension Plasma Sprayed Al2O3 and Al2O3-YSZ Composite Coatings.” Surface & Coatings Technology 205 (4): 1004–1008. doi:10.1016/j.surfcoat.2010.06.003.
   Web of Science ®Google Scholar
• Tucker, R. C., Jr. 1995. On the Relationship between the Microstructure and the Wear Characteristics of Selected Thermal Spray Coatings, 477–482. Kobe, Japan: Proceeding of ITSC.
   Google Scholar
• Ulutan, M., K. Kilicay, E. Kaya, and İ. Bayar. 2016. “Plasma Transferred Arc Surface Modification of Atmospheric Plasma Sprayed Ceramic Coatings.” Journal of Mechanical Science and Technology 30 (8): 3813–3818. doi:10.1007/s12206-016-0744-y.
   Web of Science ®Google Scholar
• Vadiraj, A., M. Kamaraj, and V. S. Sreenivasan. 2013. “Microstructure and Dry Sliding Wear Behavior of Titania and Alumina-titania Coatings.” Surface Engineering 29 (1): 11–16. doi:10.1179/1743294411Y.0000000068.
   Web of Science ®Google Scholar
• Vargas., F., H. Agerges., P. Fournier., F. Fauchais., and M. E. Lopez. 2010. “Mechanical and Tribological Performance of Al2O3-TiO2 Coatings Elaborated by Flame and Plasma Spraying.” Surface & Coatings Technology 205 (4): 1132–1136. doi:10.1016/j.surfcoat.2010.07.061.
   Web of Science ®Google Scholar
• Venkataraman, R., B. Ravikumar, R. Krishnamurthy, and D. K. Das. 2006. “A Study on Phase Stability Observed in As-sprayed Alumina-13wt% Titania Coatings Grown by Detonation Gun and Plasma Spraying on Low Alloy Steel Substrates.” Surface & Coatings Technology 201 (6): 3087–3095. doi:10.1016/j.surfcoat.2006.06.037.
   Web of Science ®Google Scholar
• Vijayanand, P., A. Kumar, K. R. Vijaya Kumar, A. Vinod, P. Kumaran, and S. Arungalai Vendan. 2017a. “Characterizations of Plasma Sprayed Composite Coatings over 1020 Mild Steel.” J. Mechanical Science and Tech 31 (10): 4747–4754. doi:10.1007/s12206-017-0921-7.
   Web of Science ®Google Scholar
• Vijayanand, P., A. Kumar, K. R. Vijaya Kumar, A. Vinod, P. Kumaran, and S. Arungalai Vendan. 2017b. “Characterizations of Plasma Sprayed Composite Coatings over 1020 Mild Steel.” Journal of Mechanical Science and Technology 31 (10): 4747–4754.
   Web of Science ®Google Scholar
• Vincent., M., E. Bannier., P. Carpio., E. Rayon., and R. Benavente. 2015. “Effect of the Initial Particle Size Distribution on the Properties of Suspension Plasma Sprayed Al2O3-TiO2 Coatings.” Surface & Coatings Technology 268: 209–215. doi:10.1016/j.surfcoat.2014.12.010.
   Web of Science ®Google Scholar
• Wahab, J. A., M. J. Ghazali, and M. N. Derman, “Corrosion Resistance of Micro-textured Surface Modified Alumina-titania Coating.” (2020), IOP. Conference series: Materials Science and Engineering. Vol.743, doi:10.1088/1757-899X/743/1/012004.
   Google Scholar
• Wahab, J. A., M. J. Ghazali, Z. Sajuri, Y. Otsuka, M. Jayaprakash, S. Nakamura, and A. F. S. Baharin. 2017. “Effects of Micro-grooves on Tribological Behavior of Plasma Sprayed Alumina-13%Titania Coatings.” Ceramics International , Vol.43, Issue 8, pp.6410-6416, doi:10.1016/j.ceramint.2017.02.052.
   Google Scholar
• Wang, D., Z. Tian, L. Shen, Z. Liu, and Y. Huang. 2009. “Microstructural Characteristics and Formation Mechanism of Al2O3-13wt.% TiO2 Coatings Plasma-sprayed with Nanostructured Agglomerated Powders.” Journal of Surface and Coatings Technology 203 (1): 1298–1303. doi:10.1016/j.surfcoat.2008.10.027.
   Google Scholar
• Wang, L., S. Liu, J. Gou, Q. Zhang, F. Zhou, Y. Wang, and R. Chu. 2019a. “Study on the Wear Resistance of Graphene Modified Nanostructured Al2O3/TiO2 Coatings.” Applied Surface Science, Vol.492, pp.272–279. doi:10.1016/j.apsusc.2019.06.102.
   Google Scholar
• Wang, M., and L. L. Shaw. 2007. “Effects of the Powder Manufacturing Method on Microstructure and Wear Performance of Plasma Sprayed Alumina-titania Coatings.” Surface & Coatings Technology 202 (1): 34–44. doi:10.1016/j.surfcoat.2007.04.057.
   Web of Science ®Google Scholar
• Wang, M., Z. Zhou, Y. Yu, and W. Zehua. 2019b. “Thermal Shock Resistance of Plasma Sprayed Al2O3-13wt% TiO2 Coating Evaluated by Residual Strength Method.” Surface & Coatings Technology 375: 888–893. doi:10.1016/j.surfcoat.2019.07.062.
   Web of Science ®Google Scholar
• Wang, Y., S. Jiang, M. Wang, S. Wang, T. D. Xiao, and P. R. Strutt. 2000. “Abrasive Wear Characteristics of Plasma Sprayed Nanostructured Alumina/titania Coatings.” Wear Vol. 237 (No. 1): pp. 176–185. doi:10.1016/S0043-1648(99)00323-3.
   Google Scholar
• xxxx. 1993. Metco Plasma Spraying Manual. USA: Met.
   Google Scholar
• Yamamota, T., M. Olsson, and S. Hogmark. 1994. ““Wear Mechanisms and Tribo Mapping of Al2O3 and SiC in Dry Sliding.” Wear Volume 174: 21.
   Google Scholar
• Yang, K., L. Jiaqi, Q. Y. Wang, L. Zhenyu, Y. Jiang, and Y. Bao. 2019. “Effect of Laser Remelting on Microstructure and Wear Resistance of Plasma Sprayed Al2O3-40%TiO2 Coating.” Wear 426-427: 314–318. doi:10.1016/j.wear.2019.01.100.
   Web of Science ®Google Scholar
• Yilmaz, R., A. O. Kurt, A. Demir, and Z. Tatli. 2007. “Effects of TiO2 on the Mechanical Properties of the Al2O3-TiO2 Plasma Sprayed Coating.” Journal of the European Ceramic Society 27 (2–3): 1319–1323. doi:10.1016/j.jeurceramsoc.2006.04.099.
   Web of Science ®Google Scholar
• Zavareh, M. A., A. A. Mohammed Sarhan, R. Karimzadeh, R. Singh, and A. I. Kuldeep Singh. 2017. “Analysis of Corrosion Protection Behavior of Al2O3-TiO2 Oxide Ceramic Coating on Carbon Steel Pipe for Petroleum Industry.” Ceramics International. doi:10.1016/j.ceramint.
   Web of Science ®Google Scholar
• Zou, Z., Y. Wang, F. Zhou, L. Wang, S. Liu, and Y. Wang. 2018. “Tribological Property of Plasma-Sprayed Al2O3-13wt%TiO2 Coatings onto Resin-based Composites.” Applied Surface Science 431: 75–80. doi:10.1016/j.apsusc.2017.05.239.
   Web of Science ®Google Scholar