Effect of face sheet on the flexural and tensile characteristics in GLARE laminates

References

• Asundi, A. and Choi, A. Y., 1997. “Fiber Metal laminates: An Advanced Material for Future Aircraft.„ Journal of Materials Processing Technology 63 (1-3): 384-394. doi:10.1016/S0924-0136(96)02652-0.
   Google Scholar
• Bellini, C., Di Cocco, V., Iacoviello, F. and Sorrentino, L., 2019 “Experimental Analysis of Aluminium/carbon Epoxy Hybrid Laminates under Flexural Load.” Frattura Ed IntegritàStrutturale 13 (49): 739–747. doi:10.3221/IGF-ESIS.49.66.
   Google Scholar
• Berthelot, J. M., 2006.  “Damping Analysis of Laminated Beams and Plates Using the Ritz Method.” Composite Structures 74 (2): 186–201. doi:10.1016/j.compstruct.2005.04.031.
   Web of Science ®Google Scholar
• Bieniaś, J., Jakubczak, P., Surowska, B. and Dragan, K., 2015. “Low-energy Impact Behavior and Damage Characterization of Carbon Fiber Reinforced Polymer and Aluminum Hybrid Laminates.” Archives of Civil and Mechanical Engineering 15 (4): 925–932. doi:10.1016/j.acme.2014.09.007.
   Web of Science ®Google Scholar
• Botelho, E. C., Almeida, R. S., Pardini, L. C. and Rezende, M. C., 2007. “Elastic Properties of Hygrothermally Conditioned Glare Laminate.” International Journal of Engineering Science 45 (1): 163–172. doi:10.1016/j.ijengsci.2006.08.017.
   Web of Science ®Google Scholar
• Carrillo, J. G. and Cantwell, W. J., 2007. “Scaling Effects in the Tensile Behavior of Fiber-metal Laminates.” Composites Science and Technology 67 (7–8): 1684–1693. doi:10.1016/j.compscitech.2006.06.018.
   Web of Science ®Google Scholar
• Castrodeza, E. M., Bastian, F. L. and Ipina, J. P., 2005. “Fracture Toughness of Unidirectional Fiber–metal Laminates: Crack Orientation Effect.” Engineering Fracture Mechanics 72 (14): 2268–2279. doi:10.1016/j.engfracmech.2005.02.006.
   Web of Science ®Google Scholar
• Fiore, V., Alagna, F., Di Bella, G. and Valenza, A., 2013. “On the Mechanical Behavior of BFRP to Aluminum AA6086 Mixed Joints.” Composites Part B: Engineering 48: 79–87. doi:10.1016/j.compositesb.2012.12.009.
   Web of Science ®Google Scholar
• Krishnakumar, S., 1994.  “Fiber Metal Laminates—the Synthesis of Metals and Composites.” Material And Manufacturing Process 9 (2): 295–354. doi:10.1080/10426919408934905.
   Google Scholar
• Kumar, M. H., Mathivanan, N. R. and Kumar, S., 2018. “Experiment Investigations of Effect of Laminate Thickness on Flexural Properties of GLARE and GFRP Laminates.” Materials Research Express 6 (2): 025313. doi:10.1088/2053-1591/aaf066.
   Web of Science ®Google Scholar
• Laliberte, J., Poon, C., Straznicky, P. V. and Fahr, A., 2000. “Applications of Fiber-metal Laminates.” Polymer Composites 21 (4): 558–567. doi:10.1002/pc.10211.
   Web of Science ®Google Scholar
• Langdon, G.S., Lemanski, S.L., Nurick, G.N., Simmons, M.C., Cantwell, W.J. and Schleyer, G. K., 2007. “Behaviour of Fibre–metal Laminates Subjected to Localised Blast Loading: Part I—Experimental Observations.” International Journal of Impact Engineering 34 (7): 1202–1222. doi:10.1016/j.ijimpeng.2006.05.008.
   Web of Science ®Google Scholar
• Langdon, G. S., Nurick, G. N., Lemanski, S. L., Simmons, M. C., Cantwell, W. J. and Schleyer, G. K., 2007. “Failure Characterisation of Blast-loaded Fibre–metal Laminate Panels Based on Aluminium and Glass–fibre Reinforced Polypropylene.” Composites Science and Technology 67 (7–8): 1385–1405. doi:10.1016/j.compscitech.2006.09.010.
   Web of Science ®Google Scholar
• Mathivanan, N. R., Babu, N. M. and Kumar, K. V., 2018. “Empirical Study on Twisting Force Using Taguchi Doe Technique during Drilling of Hybrid FRP Laminate.” Australian Journal of Mechanical Engineering 18 (3). doi:10.1080/14484846.2020.1861756.
   Google Scholar
• Babu, N. M. and Mathivanan N, R., 2021. “Statistical Analysis of Drilled Hole Parameters during Machining of Carbon/glass FRP Laminates.” Advances in Materials and Processing Technologies 7 (1). doi:10.1080/2374068X.2020.1860497.
   Google Scholar
• Babu, N. M., Mathivanan N, R. and Kumar M, H., 2020. “Drill Hole Surface Characterization of Hybrid FRP Laminates through Statistical Analysis.” Australian Journal of Mechanical Engineering 18 (3). doi:10.1080/14484846.2020.1861756.
   Google Scholar
• Babu, N. M., Mathivanan, N. R. and Kumar, K. V., 2019. “„Influence of Machining Parameters on the Response Variable during Drilling of the Hybrid laminate.” Australian Journal of Mechanical Engineering pp.1-10. doi:10.1080/14484846.2019.1704492
   Google Scholar
• Moussavi-Torshizi, S.E., Dariushi, S., Sadighi, M. and Safarpour, P., 2010. “A Study on Tensile Properties of A Novel Fiber/metal Laminates.” Materials Science and Engineering: A 527 (18–19): 4920–4925. doi:10.1016/j.msea.2010.04.028.
   Web of Science ®Google Scholar
• Müller, B., Hagenbeek, M. and Sinke, J., 2016.“Thermal Cycling of (Heated) Fibre Metal Laminates.” Composite Structures 152: 106–116. doi:10.1016/j.compstruct.2016.05.020.
   Web of Science ®Google Scholar
• Ning, H., Li, Y., Hu, N., Arai, M., Takizawa, N., Liu, Y., Wu, L., Li, J. and Mo, F., 2015. “Experimental and Numerical Study on the Improvement of Interlaminar Mechanical Properties of Al/CFRP Laminates.” Journal of Materials Processing Technology 216: 79–88. doi:10.1016/j.jmatprotec.2014.08.031.
   Web of Science ®Google Scholar
• Sathyaseelan, P., Logesh, K., Venkatasudhahar, M. and Dilip Raja, N., 2015. “Experimental and Finite Element Analysis of Fibre Metal Laminates (FML’S) Subjected to Tensile, Flexural, and Impact Loadings with Different Stacking Sequence.” International Journal of Mechanical & Mechatronics Engineering 15 (3): 23–27.
   Google Scholar
• Sinmazçelik, T., Avcu, E., Bora, M.Ö. and Çoban, O., 2011.  “A Review: Fibre Metal Laminates, Background, Bonding Types, and Applied Test Methods.” Materials & Design 32 (7): 3671–3685. doi:10.1016/j.matdes.2011.03.011.
   Web of Science ®Google Scholar
• Vogelesang, L. B., Schijve, J. and Fredell, R., 1995. “Fibre Metal Laminates: Damage Tolerant Aerospace Materials.” Case Studies in Manufacturing with Advanced Materials 2: 51–58.
   Google Scholar
• Wu, H. F. and Wu, L. L., 1994. “A Study of Tension Test Specimens of Laminated Hybrid Composites. 1: Methods of Approach.” Composites Part A: Applied Science and Manufacturing 27 (8): 647–654. doi:10.1016/1359-835X(96)00033-4.
   Web of Science ®Google Scholar
• Wu, H. F., Wu, L. L., Slagter, W.J. and Verolme, J. L., 1994. “Use of Rule of Mixtures and Metal Volume Fraction for Mechanical Property Predictions of Fibre-reinforced Aluminium Laminates.” Journal of Materials Science 29 (17): 4583–4591. doi:10.1007/BF00376282.
   Web of Science ®Google Scholar
• Wu, X., Pan, Y., Wu, G., Huang, Z., Tian, R. and Sun, S., 2017. “Flexural Behaviour of CFRP/MG Hybrid Laminates with Different Layers Thickness.” Advanced Composites Letters 26 (5): 096369351702600505. doi:10.1177/096369351702600505.
   Web of Science ®Google Scholar
• Xia, Y., Wang, Y., Zhou, Y. and Jeelani, S., 2007. “Effect of Strain Rate on Tensile Behavior of Carbon Fiber Reinforced Aluminum Laminates.” Materials Letters 61 (1): 213–215. doi:10.1016/j.matlet.2006.04.043.
   Web of Science ®Google Scholar
• Xu, Y., Li, H., Shen, Y., Liu, S., Wang, W. and Tao, J., 2016 “Improvement of Adhesion Performance between Aluminum Alloy Sheet and Epoxy Based on Anodizing Technique.” International Journal of Adhesion and Adhesives 70: 74–80. doi:10.1016/j.ijadhadh.2016.05.007.
   Web of Science ®Google Scholar
• Zheng, R., Lin, J., Wang, P. C., Zhu, C. and Wu, Y., 2015. “Effect of Adhesive Characteristics on Static Strength of Adhesive-bonded Aluminum Alloys.” International Journal of Adhesion and Adhesives 57: 85–94. doi:10.1016/j.ijadhadh.2014.10.007.
   Web of Science ®Google Scholar
• Zhou, Y., Wang, Y. and Mallick, P. K., 2004. “An Experimental Study on the Tensile Behavior of Kevlar Fiber Reinforced Aluminum Laminates at High Strain Rates.” Materials Science and Engineering: A 381 (1–2): 355–362. doi:10.1016/j.msea.2004.04.027.
   Web of Science ®Google Scholar