References
- Bai, H., H. Deng, L. Chen, X. Liu, X. Qin, D. Zhang, T. Liu, and X. Cui. 2021. “Effect of Heat Treatment on the Microstructure and Mechanical Properties of Selective Laser-melted Ti64 and Ti-5Al-5Mo-5V-1Cr-1Fe.” Metals 11 (4): 534. doi:https://doi.org/10.3390/met11040534.
- Banerjee, S., and P. Mukhopadhyay. Phase Transformations: Examples from Titanium and Zirconium Alloys. Vol. 12Pergamon Materials Series and R.W. Cahn. Elsevier. 2010.
- Cain, V., L. Thijs, J. Van Humbeeck, B. Van Hooreweder, and R. Knutsen. 2015. “Crack Propagation and Fracture Toughness of Ti6Al4V Alloy Produced by Selective Laser Melting.” Additive Manufacturing 5: 68–76. doi:https://doi.org/10.1016/j.addma.2014.12.006.
- Cao, S., R. Chu, X. Zhou, K. Yang, Q. Jia, C.V.S. Lim, A. Huang, and X. Wu. 2018. “Role of Martensite Decomposition in Tensile Properties of Selective Laser Melted Ti-6Al-4V.” Journal of Alloys and Compounds 744: 357–363. doi:https://doi.org/10.1016/j.jallcom.2018.02.111.
- Chong, Y., T. Bhattacharjee, J. Yi, A. Shibata, and N. Tsuji. 2017. “Mechanical Properties of Fully Martensite Microstructure in Ti-6Al-4V Alloy Transformed from Refined Beta Grains Obtained by Rapid Heat Treatment (RHT).” Scripta Materialia 138: 66–70. doi:https://doi.org/10.1016/j.scriptamat.2017.05.038.
- De Formanoir, C., A. Brulard, S. Vivès, G. Martin, F. Prima, S. Michotte, E. Rivière, A. Dolimont, and S. Godet. 2017. “A Strategy to Improve the Work-hardening Behavior of Ti–6Al–4V Parts Produced by Additive Manufacturing.” Materials Research Letters 5 (3): 201–208. doi:https://doi.org/10.1080/21663831.2016.1245681.
- De Formanoir, C., G. Martin, F. Prima, S.Y. Allain, T. Dessolier, F. Sun, S. Vivès, B. Hary, Y. Bréchet, and S. Godet. 2019. “Micromechanical Behavior and Thermal Stability of a Dual-phase α+ α’ Titanium Alloy Produced by Additive Manufacturing.” Acta Materialia 162: 149–162. doi:https://doi.org/10.1016/j.actamat.2018.09.050.
- Dental Implants Market Size, Share, Growth, Industry Report 2018-2024, Grand View Research, Report ID: GVR-1-68038-566-3, 2018.
- Duerig, T. W., and J.C. Williams. 1984. “Overview: Microstructure and Properies of Beta Titanium Alloys, In: Beta Titanium Alloys in the 80s.” In Proceedings of the Symposium, Metallurgical Society of AIME, edited by R. R. Boyer and H.W. Rosenberg, 19–67. Atlanta, GA, US.
- Gong, H., K. Rafi, H. Gu, G.D. Janaki Ram, T. Starr, and B. Stucker. 2015. “Influence of Defects on Mechanical Properties of Ti-6Al-4V Components Produced by Selective Laser Melting and Electron Beam Melting.” Materials and Design 86: 545–554. doi:https://doi.org/10.1016/j.matdes.2015.07.147.
- Gupta, S.K., N. Shahidsha, S. Bahl, D. Kedaria, S. Singamneni, P.K.D.V. Yarlagadda, S. Suwas, and K. Chatterjee. 2021. “Enhanced Biomechanical Performance of Additively Manufactured Ti-6Al-4V Bone Plates.” Journal of the Mechanical Behavior of Biomedical Materials 119: 104552. doi:https://doi.org/10.1016/j.jmbbm.2021.104552.
- Karimi, J., C. Suryanarayana, I. Okulov, and K.G. Prashanth. 2021. “Selective Laser Melting of Ti6Al4V: Effect of Laser Re-melting.” Materials Science and Engineering A 805: 140558. doi:https://doi.org/10.1016/j.msea.2020.140558.
- Khorasani, A., I. Gibson, U.S. Awan, and A. Ghaderi. 2019. The Effect of SLM Process Parameters on Density, Hardness, Tensile Strength and Surface Quality of Ti-6Al-4V, Additive Manufacturing 25: 176–186. doi:https://doi.org/10.1016/j.addma.2018.09.002.
- Kumar, P., O. Prakash, and U. Ramamurty. 2018. “Micro-and Meso-structures and Their Influence on Mechanical Properties of Selectively Laser Melted Ti-6Al-4V.” Acta Materialia 154: 246–260. doi:https://doi.org/10.1016/j.actamat.2018.05.044.
- Kwasniak, P., H. Garbacz, and K.J. Kurzydlowski. 2016. “Solid Solution Strengthening of Hexagonal Titanium Alloys: Restoring Forces and Stacking Faults Calculated from First Principles.” Acta Materialia 102: 304–314. doi:https://doi.org/10.1016/j.actamat.2015.09.041.
- Leyens, C., and M. Peters. 2003. Titanium and Titanium Alloys: Fundamentals and Applications. Weinheim: John Wiley & Sons.
- Li, C.-L., J.-K. Hong, P.L. Narayana, S.-W. Choi, S.W. Lee, C.H. Park, J.-T. Yeom, and Q. Mei. 2021. “Realizing Superior Ductility of Selective Laser Melted Ti-6Al-4V through a Multi-step Heat Treatment.” Materials Science and Engineering A 799: 140367. doi:https://doi.org/10.1016/j.msea.2020.140367.
- Matsumoto, H., A. Chiba, and S. Hanada. 2008. “Anisotropy of Young’s Modulus and Tensile Properties in Cold Rolled α′ Martensite Ti–V–Sn Alloys.” Materials Science and Engineering 119 (1–2): 503–510. doi:https://doi.org/10.1016/j.msea.2007.11.068.
- Matsumoto, H., H. Yoneda, K. Sato, S. Kurosu, E. Maire, D. Fabregue, T.J. Konno, and A. Chiba. 2011. “Room-temperature Ductility of Ti–6Al–4V Alloy with α′ Martensite Microstructure.” Materials Science and Engineering A 528 (3): 1512–1520. doi:https://doi.org/10.1016/j.msea.2010.10.070.
- Matsumoto, H., S. Watanabe, and S. Hanada. 2007. “α′ Martensite Ti–V–Sn Alloys with Low Young’s Modulus and High Strength.” Materials Science and Engineering A 448 (1–2): 39–48. doi:https://doi.org/10.1016/j.msea.2006.11.022.
- Mouritz, A.P. 2012. Introduction to Aerospace Materials. Cambridge, England: Woodhead Publishing Limited.
- Ren, S., Y. Chen, T. Liu, and X. Qu. 2019. “Effect of Build Orientation on Mechanical Properties and Microstructure of Ti-6Al-4V Manufactured by Selective Laser Melting.” Metallurgical and Materials Transactions A 50 (9): 4388–4409. doi:https://doi.org/10.1007/s11661-019-05322-w.
- Simonelli, M., Y.Y. Tse, and C. Tuck. 2014. “The Formation of α+ β Microstructure in As-fabricated Selective Laser Melting of Ti–6Al–4V.” Journal of Materials Research 29 (17): 2028–2035. doi:https://doi.org/10.1557/jmr.2014.166.
- Thijs, L., F. Verhaeghe, T. Craeghs, J.V. Humbeeck, and J.-P. Kruth. 2010. “A Study of the Microstructural Evolution during Selective Laser Melting of Ti–6Al–4V.” Acta Materialia 58 (9): 3303–3312. doi:https://doi.org/10.1016/j.actamat.2010.02.004.
- Vandenbroucke, B., and J.P. Kruth. 2007. “Selective Laser Melting of Biocompatible Metals for Rapid Manufacturing of Medical Parts.” Rapid Prototyping Journal 13 (4): 196–203. doi:https://doi.org/10.1108/13552540710776142.
- Vilaro, T., C. Colin, and J.D. Bartout. 2011. “As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting.” Metallurgical and Materials Transactions A 42 (10): 3190–3199. doi:https://doi.org/10.1007/s11661-011-0731-y.
- Voisin, T., N.P. Calta, S.A. Khairallah, J.-B. Forien, L. Balogh, R.W. Cunningham, A.D. Rollett, and Y.M. Wang. 2018. “Defects-dictated Tensile Properties of Selective Laser Melted Ti-6Al-4V.” Materials & Design 158: 113–126. doi:https://doi.org/10.1016/j.matdes.2018.08.004.
- Xu, W., E.W. Lui, A. Pateras, M. Qian, and M. Brandt. 2017. “In Situ Tailoring Microstructure in Additively Manufactured Ti-6Al-4V for Superior Mechanical Performance.” Acta Materialia 125: 390–400. doi:https://doi.org/10.1016/j.actamat.2016.12.027.
- Xu, W., M. Brandt, S. Sun, J. Elambasseril, Q. Liu, K. Latham, K. Xia, and M. Qian. 2015a. “Additive Manufacturing of Strong and Ductile Ti–6Al–4V by Selective Laser Melting via in Situ Martensite Decomposition.” Acta Materialia 85: 74–84. doi:https://doi.org/10.1016/j.actamat.2014.11.028.
- Xu, W., S. Sun, J. Elambasseril, Q. Liu, M. Brandt, and M. Qian. 2015b. “Ti-6Al-4V Additively Manufactured by Selective Laser Melting with Superior Mechanical Properties.” JOM 67 (3): 668–673. doi:https://doi.org/10.1007/s11837-015-1297-8.
- Xu, Y., D. Zhang, Y. Guo, S. Hu, X. Wu, and Y. Jiang. 2020. “Microstructural Tailoring of As-selective Laser Melted Ti6Al4V Alloy for High Mechanical Properties.” Journal of Alloys and Compounds 816: 152536. doi:https://doi.org/10.1016/j.jallcom.2019.152536.
- Yan, Q., B. Chen, N. Kang, X. Lin, S. Lv, K. Kondoh, S. Li, and J.S. Li. 2020. “Comparison Study on Microstructure and Mechanical Properties of Ti-6Al-4V Alloys Fabricated by Powder-based Selective-laser-melting and Sintering Methods.” Materials Characterization 164: 110358. doi:https://doi.org/10.1016/j.matchar.2020.110358.
- Yan, X., S. Yin, C. Chen, C. Huang, R. Bolot, R. Lupoi, M. Kuang, et al. 2018. “Effect of Heat Treatment on the Phase Transformation and Mechanical Properties of Ti6Al4V Fabricated by Selective Laser Melting.” Journal of Alloys and Compounds 764: 1056–1071. doi:https://doi.org/10.1016/j.jallcom.2018.06.076.
- Yang, J., H. Yu, J. Yin, M. Gao, Z. Wang, and X. Zeng. 2016. “Formation and Control of Martensite in Ti-6Al-4V Alloy Produced by Selective Laser Melting.” Materials & Design 108: 308–318. doi:https://doi.org/10.1016/j.matdes.2016.06.117.
- Zafari, A., E.W. Lui, S. Jin, M. Li, T.T. Molla, G. Sha, and K. Xia. 2020. “Hybridisation of Microstructures from Three Classes of Titanium Alloys.” Materials Science and Engineering A 788: 139572. doi:https://doi.org/10.1016/j.msea.2020.139572.
- Zafari, A., and K. Xia. 2018. “High Ductility in a Fully Martensitic Microstructure: A Paradox in a Ti Alloy Produced by Selective Laser Melting.” Materials Research Letters 6 (11): 627–633. doi:https://doi.org/10.1080/21663831.2018.1525773.
- Zafari, A., and K. Xia. 2019. “Superior Titanium from Hybridised Microstructures–A New Strategy for Future Alloys.” Scripta Materialia 173: 61–65. doi:https://doi.org/10.1016/j.scriptamat.2019.07.031.
- Zafari, A., M. Barati, and K. Xia. 2019. “Controlling Martensitic Decomposition during Selective Laser Melting to Achieve Best Ductility in High Strength Ti-6Al-4V.” Materials Science and Engineering A 744: 445–455. doi:https://doi.org/10.1016/j.msea.2018.12.047.
- Zhao, Z., J. Chen, H. Tan, G. Zhang, X. Lin, and W. Huang. 2018. “Achieving Superior Ductility for Laser Solid Formed Extra Low Interstitial Ti-6Al-4V Titanium Alloy through Equiaxial Alpha Microstructure.” Scripta Materialia 146: 187–191. doi:https://doi.org/10.1016/j.scriptamat.2017.11.021.