References
- ASTM International. 2011. ‘ASTM E8/E8M-09 Standard Test Methods for Tension Testing of Metallic Materials’.
- Cao, S., Chu, R., Zhou, X., Yang, K., Jia, Q., Lim, C. V. S., Huang, A., Wu, X. 2018. “Role of Martensite Decomposition in Tensile Properties of Selective Laser Melted Ti-6Al-4V”. J. Alloys Compd 744: 357–363. DOI:https://doi.org/10.1016/j.jallcom.2018.02.111.
- Cao, S., Hu, Q., Huang, A., Chen, Z., Sun, M., Zhang, J., Fu, C., Jia, Q., Lim, C. V. S., Boyer, R., Yang, Y., Wu, X. 2019. “Static Coarsening Behaviour of Lamellar Microstructure in Selective Laser Melted Ti–6Al–4V”. J. Mater. Sci. Technol 35 (8): 1578–1586. doi:https://doi.org/10.1016/j.jmst.2019.04.008.
- Cao, S., Y. Zou, C. V. S. Lim, and X. Wu. 2021. “Review of Laser Powder Bed Fusion (LPBF) Fabricated Ti-6Al-4V: Process, Post-process Treatment, Microstructure, and Property.” Light Adv. Manuf 2 (2) (Jul): 1–20. doi:https://doi.org/10.37188/lam.2021.020.
- Dai, S., and Q. Du. 2016. “Computational Studies of Coarsening Rates for the Cahn–Hilliard Equation with Phase-dependent Diffusion Mobility.” Journal of Computational Physics 310: 85–108. doi:https://doi.org/10.1016/j.jcp.2016.01.018.
- E28 Committee. 2002. ‘Test Methods for Notched Bar Impact Testing of Metallic Materials’, ASTM International. doi: https://doi.org/10.1520/E0023-18.
- Facchini, L., E. Magalini, P. Robotti, A. Molinari, S. Höges, and K. Wissenbach. 2010. “Ductility of a Ti‐6Al‐4V Alloy Produced by Selective Laser Melting of Prealloyed Powders.” Rapid Prototyp. J 16 (6) (Jan): 450–459. doi:https://doi.org/10.1108/13552541011083371.
- Hrabe, N., R. White, and E. Lucon. 2019. “Effects of Internal Porosity and Crystallographic Texture on Charpy Absorbed Energy of Electron Beam Melting Titanium Alloy (Ti-6al-4v).” Mater. Sci. Eng. A 742: 269–277. doi:https://doi.org/10.1016/j.msea.2018.11.005. Jan.
- Khorasani, A., I. Gibson, M. Goldberg, and G. Littlefair. 2017. “On the Role of Different Annealing Heat Treatments on Mechanical Properties and Microstructure of Selective Laser Melted and Conventional Wrought Ti-6Al-4V.” Rapid Prototyp. J 23 (2) (Jan): 295–304. doi:https://doi.org/10.1108/RPJ-02-2016-0022.
- Krakhmalev, P., G. Fredriksson, I. Yadroitsava, N. Kazantseva, A. Du Plessis, and I. Yadroitsev. 2016. “Deformation Behavior and Microstructure of Ti6Al4V Manufactured by SLM.” Phys. Procedia 83: 778–788. doi:https://doi.org/10.1016/j.phpro.2016.08.080.
- Lee, D.-G., S. Lee, and Y. Lee. 2008. “Effect of Precipitates on Damping Capacity and Mechanical Properties of Ti–6Al–4V Alloy.” Mater. Sci. Eng. A 486 (1) (Jul): 19–26. doi:https://doi.org/10.1016/j.msea.2007.08.053.
- Li, P., Zhang, Y., Wang, W. Y., He, Y., Wang, J., Han, M., Wang, J. 2021. “Coupling Effects of High Magnetic Field and Annealing on the Microstructure Evolution and Mechanical Properties of Additive Manufactured Ti–6Al–4V.” Mater. Sci. Eng. A 824: 141815. Sep. doi:https://doi.org/10.1016/j.msea.2021.141815.
- Li, P., D. H. Warner, A. Fatemi, and N. Phan. 2016. “Critical Assessment of the Fatigue Performance of Additively Manufactured Ti–6Al–4V and Perspective for Future Research.” Int. J. Fatigue 85: 130–143. doi:https://doi.org/10.1016/j.ijfatigue.2015.12.003. Apr.
- Lu, S. L., Tang, H. P., Nai, S. M. L., Sun, Y. Y., Wang, P., Wei, J., Ma, Q. 2019. “Intensified Texture in Selective Electron Beam Melted Ti-6Al-4V Thin Plates by Hot Isostatic Pressing and Its Fundamental Influence on Tensile Fracture and Properties.” Mater. Charact 152: 162–168. Jun. doi:https://doi.org/10.1016/j.matchar.2019.04.019.
- Sabban, R., S. Bahl, K. Chatterjee, and S. Suwas. 2019. “Globularization Using Heat Treatment in Additively Manufactured Ti-6Al-4V for High Strength and Toughness.” Acta Mater 162: 239–254. doi:https://doi.org/10.1016/j.actamat.2018.09.064. Jan.
- SemenovaJu, I. P., Modina, J., Polyakov, A. V., Klevtsov, G. V., Klevtsova, N. A., Pigaleva, I. N., Valiev, R. Z. 2019. “Charpy Absorbed Energy of Ultrafine-grained Ti-6Al-4V Alloy at Cryogenic and Elevated Temperatures.” Mater. Sci. Eng. A 743: 581–589. Jan. doi:https://doi.org/10.1016/j.msea.2018.10.076.
- Stefansson, N., S. L. Semiatin, and D. Eylon. 2002. “The Kinetics of Static Globularization of Ti-6Al-4V.” Metall. Mater. Trans. A 33 (11): 3527–3534. doi:https://doi.org/10.1007/s11661-002-0340-x.
- Ter Haar, G. M., and T. H. Becker. 2018. “Selective Laser Melting Produced Ti-6Al-4V: Post-process Heat Treatments to Achieve Superior Tensile Properties.” Materials 11 (1): 146. doi:https://doi.org/10.3390/ma11010146.
- Thijs, L., F. Verhaeghe, T. Craeghs, J. Van Humbeeck, and J.-P. Kruth. 2010. “A Study of the Microstructural Evolution during Selective Laser Melting of Ti–6Al–4V.” Acta Mater 58 (9): 3303–3312. doi:https://doi.org/10.1016/j.actamat.2010.02.004.
- Vilaro, T., C. Colin, and J. D. Bartout. 2011. “As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting.” Metall. Mater. Trans. A 42 (10) (Oct): 3190–3199. doi:https://doi.org/10.1007/s11661-011-0731-y.
- Voisin, T., Calta, N., Khairallah, S., Forien, J., Balogh, L., Cunningham, R., Rollett, A., Wang, Y. 2018. “Defects-dictated Tensile Properties of Selective Laser Melted Ti-6Al-4V”. Mater. Des 158: 113–126. DOI:https://doi.org/10.1016/j.matdes.2018.08.004.
- Vrancken, B., L. Thijs, J.-P. Kruth, and J. Van Humbeeck. 2012. “Heat Treatment of Ti6Al4V Produced by Selective Laser Melting: Microstructure and Mechanical Properties.” J. Alloys Compd 541: 177–185. doi:https://doi.org/10.1016/j.jallcom.2012.07.022.
- Wu, M.-W., and P.-H. Lai. 2016. “The Positive Effect of Hot Isostatic Pressing on Improving the Anisotropies of Bending and Impact Properties in Selective Laser Melted Ti-6Al-4V Alloy.” Mater. Sci. Eng. A 658: 429–438. doi:https://doi.org/10.1016/j.msea.2016.02.023. Mar.
- Xu, J., W. Zeng, X. Sun, Z. Jia, and J. Zhou. 2015a. “Static Coarsening Behavior of the Lamellar Alpha in Ti-17 Alloy.” J. Alloys Compd 631: 248–254. doi:https://doi.org/10.1016/j.jallcom.2015.01.106.
- Xu, W., Brandt, M., Sun, S., Elambasseril, J., Liu, Q., Latham, K., Xia, K., Ma, Q. 2015. “Additive Manufacturing of Strong and Ductile Ti–6Al–4V by Selective Laser Melting via in Situ Martensite Decomposition”. Acta Mater 85: 74–84. DOI:https://doi.org/10.1016/j.actamat.2014.11.028.
- Xu, W., E. W. Lui, A. Pateras, M. Qian, and M. Brandt. 2017. “In Situ Tailoring Microstructure in Additively Manufactured Ti-6Al-4V for Superior Mechanical Performance.” Acta Mater 125: 390–400. doi:https://doi.org/10.1016/j.actamat.2016.12.027. Feb.
- Xu, W., S. Sun, J. Elambasseril, Q. Liu, M. Brandt, and M. Qian. 2015b. “Ti-6Al-4V Additively Manufactured by Selective Laser Melting with Superior Mechanical Properties.” JOM 67 (3) (Mar): 668–673. doi:https://doi.org/10.1007/s11837-015-1297-8.
- Yadroitsev, I., P. Krakhmalev, and I. Yadroitsava. 2014. “Selective Laser Melting of Ti6Al4V Alloy for Biomedical Applications: Temperature Monitoring and Microstructural Evolution.” Journal of Alloys and Compounds 583: 404–409. doi:https://doi.org/10.1016/j.jallcom.2013.08.183. Jan.
- Zhang, X.-Y., G. Fang, S. Leeflang, A. J. Böttger, A. A. Zadpoor, and J. Zhou. 2018. “Effect of Subtransus Heat Treatment on the Microstructure and Mechanical Properties of Additively Manufactured Ti-6Al-4V Alloy.” J. Alloys Compd 735: 1562–1575. doi:https://doi.org/10.1016/j.jallcom.2017.11.263. Feb.