References
- AASHTO LRFD Bridge Design Specifications. eds. 2014. American Association of State Highway and Transportation Officials.
- Abaqus User’s Manual, eds. 2006. Incorporate.
- ACI Committee 318. 1999. “Building Code Requirements for Structural Concrete (ACI 318-99) and Commentary (318R-99).” Farmington Hills, Mich.: America Concrete Institute, 391.
- Ala, N., E. H. Power, and A. Azizinamini. 2016. “Experimental Evaluation of High-Performance Sliding Surfaces for Bridge Bearings.” Journal of Bridge Engineering 21 (2).
- Al-Rifaie, A., S. W. Jones., Q. Y. Wang, and Z. W. Guan. 2018. “Experimental and Numerical Study on Letral Impact Response of Concrete Filled Steel Tube Columns with End Plate Connections.” International Journal of Impact Engineering 121: 20–34. doi:10.1016/j.ijimpeng.2018.07.003.
- Austroads. 2012. “Design Rules for Bridge Bearings and Expansion Joints.” Austroads research report no. AP-R405-12, report prepared by Hanson, N., I. Steele., and N. Lake Austroads Ltd., Sydney, New South Wales. ISBN: 9781921991264.
- Bennett, M. 2014. “The Revision of AS5100. 4: Bearings and Deck Joints.” Paper presented at the 9th Austroads Bridge Conference, October 22-24, in Sydney, New South Wales, Australia.
- Bonetti, R., C. L. Roberts-Wollmann, and J. T. Santos. 2014. “Bearing Strength of Confined Concrete.” ACI Structural Journal 111 (6): 1317. doi:10.14359/51687163.
- Bonetti, R. A. 2005. “Ultimate Strength of the Local Zone in Load Transfer Tests.” Master diss., Virginia Polytechnic Institute and State University.
- Chaudhari, S. V., and M. A. Chakrabarti. 2012. “Modeling of Concrete for Nonlinear Analysis Using Finite Element Code ABAQUS.” International Journal of Computer Applications 44 (7): 14–18. doi:10.5120/6274-8437.
- Dhanasekar, M., J. A. Thamboo, and S. Nazir. 2017. “On the In-plane Shear Response of the High Bond Strength Concrete Masonry.” Materials and Structures/Materiaux Et Constructions 50 (5): 214.
- Escobar-Sandoval, E. D., A. S. Whittaker, and G. F. Dargush. 2006. “Concentrically Loaded Circular Steel Plates Bearing on Plain Concrete.” Journal of Structural Engineering, ASCE 132 (11): 1784–1792. doi:10.1061/(ASCE)0733-9445(2006)132:11(1784).
- Freire, L. M., J. De Brito, and J. R. Correia. 2015. “Inspection Survey Of Support Bearings in Road Bridges.” Journal of Performance of Constructed Facilities 29 (4).
- Genikomsou, A. S., and M. A. Polak. 2015. “Finite Element Analysis of Punching Shear of Concrete Slabs Using Damaged Plasticity Model in ABAQUS.” Engineering Structures 98: 38–48. doi:10.1016/j.engstruct.2015.04.016.
- Hite, M. C., R. DesRoches, and R. T. Leon. 2008. “Full-scale Tests of Bridge Steel Pedestals.” Journal of Bridge Engineering 13 (5): 483–491. doi:10.1061/(ASCE)1084-0702(2008)13:5(483).
- Ince, R., and E. Arici. 2004. “Size Effect in Bearing Strength of Concrete Cubes.” Construction and Building Materials 18 (8): 603–609. doi:10.1016/j.conbuildmat.2004.04.002.
- Janaraj, T., and M. Dhanasekar. 2014. “Finite Element Analysis of the In-plane Shear Behaviour of Masonry Panels Confined with Reinforced Grouted Cores.” Construction and Building Materials 65: 495–506. doi:10.1016/j.conbuildmat.2014.04.133.
- Jankowiak, T., and T. Lodygowski. 2005. “Identification of Parameters of Concrete Damage Plasticity Constitutive Model.” Foundations of Civil and Environmental Engineering 6 (1): 53–69.
- Lee, J., and G. L. Fenves. 1998. “Plastic-damage Model for Cyclic Loading of Concrete Structures.” Journal of Engineering Mechanics 124 (8): 892–900. doi:10.1061/(ASCE)0733-9399(1998)124:8(892).
- Lubliner, J., J. Oliver., S. Oller., and E. Onate. 1989. “A Plastic-damage Model for Concrete.” International Journal of Solids and Structures 25 (3): 299–326. doi:10.1016/0020-7683(89)90050-4.
- Mishra, S. K., S. Gur, K. Roy, and S. Chakraborty. 2015. “Response of Bridges Isolated by Shape Memory–alloy Rubber Bearing.” Journal of Bridge Engineering 21: 3.
- Nguyen, H. H., and J. L. Tassoulas. 2009. “Directional Effects of Shear Combined with Compression on Bridge Elastomeric Bearings.” Journal of Bridge Engineering 15 (1): 73–80. doi:10.1061/(ASCE)BE.1943-5592.0000034.
- Noor-E-Khuda, S., M. Dhanasekar, and D. P. Thambiratnam. 2016. “An Explicit Finite Element Modelling Method for Masonry Walls under Out-of-plane Loading.” Engineering Structures 113: 103–120. doi:10.1016/j.engstruct.2016.01.026.
- Roberts-Wollmann, C. L., T. Banta, R. Bonetti, and F. Charney. 2006. “Bearing Strength of Lightweight Concrete.” ACI Materials Journal 103 (6): 459–466.
- Standard, A. 2009. Concrete Structures AS3600-2009. Sydney, New South Wales, Australia: Standards Australia Limited.
- Starossek, U., N. Falah, and T. Lohning. 2010. “Numerical Analyses of the Force Transfer in Concrete-filled Steel Tube Columns.” Structural Engineering and Mechanics 35 (2): 241–256. doi:10.12989/sem.2010.35.2.241.
- Steelman, J. S. 2016. “Performance Of Nonseismic Ptfe Sliding Bearings When Subjected to Seismic Demands 1.” Journal Of Bridge Engineering 21: 1.
- Viljoen, H. S., A. A. Newmark, and B. E. Mawman. 1972. “Innovative Bearing Replacement Techniques for Black River Parkway Viaduct.” Civil Engineering = Siviele Ingenieurswese 14 (10): 26–27.
- Weisman, J., and G. P. Warn. 2011. “Stability of Elastomeric and Lead-rubber Seismic Isolation Bearings.” Journal of Structural Engineering 138 (2): 215–223. doi:10.1061/(ASCE)ST.1943-541X.0000459.
- Zahra, T., and M. Dhanasekar. 2016a. “Prediction Of Masonry Compressive Behaviour Using a Damage Mechanics Inspired Modelling Method.” Construction and Building Materials 109: 128–138. doi:10.1016/j.conbuildmat.2016.01.048
- Zhara, T. 2016b. “A Generalised Damage Model for Masonry under Compression.” International Journal Of Damage Mechanics 25 (5): 629–660. doi:10.1177/1056789516656745.
- Zong, N., and M. Dhanasekar. 2013a. “Minimization of Railhead Edge Stresses through Shape Optimization.” Engineering Optimization 45 (9): 1043–1060. doi:10.1080/0305215X.2012.717075.
- Zong, N., and M. Dhanasekar. 2013b. “Hybrid Genetic Algorithm for Elimination of Severe Stress Concentration in Railhead Ends.” Journal of Computing in Civil Engineering, ASCE 29 (5).
- Zong, N., and M. Dhanasekar. 2017. “Sleeper Embedded Insulated Rail Joints for Minimising the Number of Modes of Failure.” Engineering Failure Analysis 76: 27–43. doi:10.1016/j.engfailanal.2017.02.001.