Investigation of mechanical and durability properties of concrete made with a mixture of waste foundry sand and domestic treated wastewater

References

• Aggarwal, Y., and R. Siddique. 2014. “Microstructure and Properties of Concrete Using Bottom Ash and Waste Foundry Sand as Partial Replacement of Fine Aggregates.” Construction and Building Materials 54: 210–223.
   Google Scholar
• Al-Jabri, K.S., A.H. Al-Saidy, R. Taha, and A.J. Al-Kemyani. 2011. “Effect of Using Wastewater on the Properties of High Strength Concrete.” Procedia Engineering 14: 370–376.
   Google Scholar
• American Foundry men’s Society (AFS). 1991. “Alternate Utilization of Foundry Waste Sand: Final (Phase I Report). Rep. Prepared for Illinois Department of Commerce and Community Affairs, AFS.” Des Plaines Ill: 39–41.
   Google Scholar
• Asadollahfardi, G., M. Delnavaz, V. Rashnoiee, and N. Ghonabadi. 2016. “Use of Treated Domestic Wastewater before Chlorination to Produce and Cure Concrete.” Construction and Building Materials 105: 253–261.
   Web of Science ®Google Scholar
• Asadollahfardi, G., and A.R. Mahdavi. 2019. “The Feasibility of Using Treated Industrial Wastewater to Produce Concrete.” Structural Concrete 20 (1): 123–132.
   Web of Science ®Google Scholar
• Asano, T., and J.A. Cotruvo. 2004. “Groundwater Recharge with Reclaimed Municipal Wastewater: Health and Regulatory Considerations.” Water Research 38 (8): 1941–1951.
   PubMed Web of Science ®Google Scholar
• ASTM C131/C131M-14. 2006. Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine. West Conshohocken, PA: ASTM International. doi:10.1520/C0131_C0131M-14.
   Google Scholar
• ASTM C136/C136M-14. 2014. Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates. West Conshohocken, PA: ASTM International. doi:10.1520/c0136-05.
   Google Scholar
• ASTM C143/C143M-15a. 2015. Standard Test Method for Slump of Hydraulic-Cement Concrete. West Conshohocken, PA: ASTM International. doi:10.1520/C0143_C0143M-15A.
   Google Scholar
• ASTM C150/C150M-19a. 2019. Standard Specification for Portland Cement. West Conshohocken, PA: ASTM International. doi:10.1520/C0150_C0150M-19A.
   Google Scholar
• ASTM C191. 2004. Standard Method for Setting of Hydraulic Cement by Vicat Needle. Philadelphia: American Society for testing and materials.
   Google Scholar
• ASTM C191-18a. 2018. Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle. West Conshohocken, PA: ASTM International. doi:10.1520/C0191-18A.
   Google Scholar
• ASTM C192/C192M-18. 2018. Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory. West Conshohocken, PA: ASTM International. doi:10.1520/C0192_C0192M-18.
   Google Scholar
• ASTM C597-16. 2016. Standard Test Method for Pulse Velocity through Concrete. West Conshohocken, PA: ASTM International. doi:10.1520/C0597-16.
   Google Scholar
• ASTM C805/ C805M. 2018. Standard Test Method for Rebound Number of Hardened Concrete. West Conshohocken, PA: ASTM International. doi:10.1520/C0805_C0805M-18.
   Google Scholar
• Basar, H.M., and N.D. Aksoy. 2012. “The Effect of Waste Foundry Sand (WFS) as Partial Replacement of Sand on the Mechanical, Leaching and Microstructural Characteristics of ready-mixed Concrete.” Construction and Building Materials 35: 508–515.
   Web of Science ®Google Scholar
• Bhardwaj, B., and P. Kumar. 2017. “Waste Foundry Sand in Concrete: A Review.” Construction and Building Materials 156: 661–674.
   Web of Science ®Google Scholar
• BS 1881 part 116. 1993. Methods for Determination of Compressive Strength of Concrete Cubes. British Standard Institution.
   Google Scholar
• BS 1881 Part 122. 2016. Testing Concrete. Method for Determination of Water Absorption. British Standard Institution.
   Google Scholar
• Dash, M.K., S.K. Patro, and A.K. Rath. 2016. “Sustainable Use of industrial-waste as Partial Replacement of Fine Aggregate for Preparation of concrete–A Review.” International Journal of Sustainable Built Environment 5 (2): 484–516.
   Google Scholar
• Dodge Wooden, R. 2012. Concrete Portable Handbook, 65–82. doi:10.1016/B978-0-12-382176-8.00009-0.
   Google Scholar
• Guggemos, A.A., and A. Horvath. 2005. “Comparison of Environmental Effects of steel-and concrete-framed Buildings.” Journal of Infrastructure Systems 11 (2): 93–101.
   Web of Science ®Google Scholar
• Gurumoorthy, N., and K. Arunachalam. 2016. “Micro and Mechanical Behaviour of Treated Used Foundry Sand Concrete.” Construction and Building Materials 123: 184–190.
   Google Scholar
• Igbal, M.F., Q-F. Liu, I. Azim, X. Zhu, J. Yang, M.F. Javed, and M. Rauf. 2020. “Prediction of Mechanical Properties of Green Concrete Incorporating Waste Foundry Sand Based on Gene Expression Programming.” Journal of Hazard Material 384: 121322.
   PubMedGoogle Scholar
• IS 13311. 1992. Method of Non-destructive Testing of Concrete–Part 1. Ultrasonic Pulse Velocity.
   Google Scholar
• Ismail, Z.Z., and E.A. Al-Hashmi. 2011. “Assessing the Recycling Potential of Industrial Wastewater to Replace Freshwater in Concrete Mixes: Application of Polyvinyl Acetate Resin Wastewater.” Journal of Cleaner Production 19 (2–3): 197–203.
   Web of Science ®Google Scholar
• Karaiskos, G., A. Deraemaeker, D.G. Aggelis, and D. Van Hemelrijck. 2015. “Monitoring of Concrete Structures Using the Ultrasonic Pulse Velocity Method.” Smart Materials and Structures 24 (11): 113001.
   Web of Science ®Google Scholar
• Khatib, J. M., B.A. Herki, and S. Kenai. 2013. “Capillarity of Concrete Incorporating Waste Foundry Sand.” Construction, and Building Material 47: 867–871.
   Web of Science ®Google Scholar
• Kotwal, A.R., 2015. “Characterization, Physical Properties and Commercial Viability of Blended Cements with High Volume Inter Ground Limestone.” PhD thesis, Texas state university.
   Google Scholar
• Levi, P., T. Vass, H. Mandova, and A. Gouy. 2019. “Cement, Track Report.” Accessed 25 August 2021. https://www.iea.org/reports/cement
   Google Scholar
• Mathye, R.P., B.D. Ikotun, and G.C. Fanourakis. 2021. “The Effect of Dry Wastewater Sludge as Sand Replacement on Concrete Strengths.” Materials Today: Proceedings 38 (2): 975–981.
   Google Scholar
• Meena, K., and S. Luhar. 2019. “Effect of Wastewater on Properties of Concrete.” Journal of Building Engineering 21: 106–112.
   Web of Science ®Google Scholar
• Miller, S. A., A. Horvath, and P.J.M. Monterio. 2018. “Impacts of Booming Concrete Production on Water Resources Worldwide.” Nature Sustainability 1 (1): 69–76.
   Web of Science ®Google Scholar
• Nadernejad, M.B., and R. Rahgozar. 2015. “The Effect of Sand Softness Modulus on Compressive Strength of Concrete.” The second national conference on structural engineering. Tehran, March, Iran: Iranian Society of Structural Engineering.
   Google Scholar
• NT BUILD 492. 1999. NORDTEST, Chloride Migration Coefficient from non-steady State Migration Experiment.
   Google Scholar
• Olonade, K.A., I. K. Ajibola, and C. L. Okeke. 2018. “Performance Evaluation of Concrete Made with Sands from Selected Locations in Osun State, Nigeria.” Case Studies in Construction Materials 8: 160–171.
   Google Scholar
• Peighambarzadeh, F. S., G. Asadollahfardi, and J. Akbardoost. 2020. “The Effects of Using Treated Wastewater on the Fracture Toughness of the Concrete.” Australian Journal of Civil Engineering 18 (1): 56–64.
   Web of Science ®Google Scholar
• Poursharifi, J., R. Farrokhzad, M. Hazrati, and M. Kashavarz. 2015. “Using Waste Foundry Sand in Concrete and Assess the Effect of It on Concrete Properties.” National conference of civil and environmental engineering, June. Qazvin City, Iran (In Farsi): Azad University of Qazvin.
   Google Scholar
• Sahmaran, M., M. Lachemi, T. Erdem, and H.E. Yucel. 2011. “Use of Spent Foundry Sand and Fly Ash for the Development of Green Self-consolidating Concrete.” Material and Structure 44 (7): 1193–1204.
   Web of Science ®Google Scholar
• Saxena, S., and A.R. Tembhurkar. 2018. “Impact of Use of Steel Slag as Coarse Aggregate and Wastewater on Fresh and Hardened Properties of Concrete.” Construction and Building Materials 165: 126–137.
   Web of Science ®Google Scholar
• Saxena, S., and A.R. Tembhurkar. 2019. “Developing a Biotechnological Technique for Reuse of Wastewater and Steel Slag in bio-concrete.” Journal of Cleaner Production 229: 193e202.
   Google Scholar
• Shakh Hassani, M.S., G. Asadollahfardi, S.F. Saghravani, S. Jafari, and F.S. Peighambarzadeh. 2020. “The Difference in Chloride Ion Diffusion Coefficient of Concrete Made with Drinking Water and Wastewater.” Construction and Building Materials 231: 117182.
   Google Scholar
• Siddique, R., G. De Schutter, and A. Noumowe. 2009. “Effect of used-foundry Sand on the Mechanical Properties of Concrete.” Construction and Building Materials 23 (2): 976–980.
   Web of Science ®Google Scholar
• Siddique, R., and G. Singh. 2011. “Utilization of Waste Foundry Sand (WFS) Concrete.” Resources Conservation and Recycling 55 (11): 885–892.
   Web of Science ®Google Scholar
• Siddique, R., G. Singh, and M. Singh. 2018. “Recycle Option for Metallurgical by-product (Spent Foundry Sand) in Green Concrete for Sustainable Construction.” Journal of Cleaner Production 172: 1111–1120.
   Google Scholar
• Silva, M., and T.R. Naik. 2010. “Sustainable Use of resources–recycling of Sewage Treatment Plant Water in Concrete.” In Proceedings of the Second International Conference on Sustainable Construction Materials and Technologies, June. 28 vols. Ancona, Italy.
   Google Scholar
• Singh, G., and R. Siddique. 2012. “Effect of Waste Foundry Sand (WFS) as Partial Replacement of Sand on the Strength, Ultrasonic Pulse Velocity and Permeability of Concrete.” Construction and Building Materials 26 (1): 416–422.
   Web of Science ®Google Scholar
• Torres, A., L. Bartlett, and C. Pilgrim. 2017. “Effect of WFS on the Mechanical Properties of Portland Cement.” Construction and Building Material 135: 674–681.
   Web of Science ®Google Scholar
• Yahyaei, B., G. Asadollahfardi, and A.M. Salehi. 2021. “Workability, Mechanical, and Durability Properties of Self‐compacting Concrete Using the Treated Wastewater.” Structural Concrete 22 (S1): E997–E1008.
   Google Scholar