Nanocomposites of high-impact polystyrene with unmodified nanosized TiO₂ and polystyrene-encapsulated MPTMS-modified nanosized TiO₂: mechanical, thermal and morphological properties

References

• Masood MT, Heredia-Guerrero JA, Ceseracciu L, et al. Superhydrophobic high impact polystyrene (HIPS) nanocomposites with wear abrasion resistance. Chem Eng J. 2017;322:10–21.
   Web of Science ®Google Scholar
• Uthirakumar P, Kim HJ, Hong CH, et al. Preparation of exfoliated high-impact polystyrene/MMT nanocomposites via in situ polymerization under controlling viscosity of the reaction medium. Polym Compos. 2008;29:142–148.
   Web of Science ®Google Scholar
• Yayshahri AM, Peighambardoust SJ, Shenavar A. Impact, thermal and biodegradation properties of high impact polystyrene/corn starch blends processed via melt extrusion. Polyolefins J. 2019;6:151–158.
   Google Scholar
• Wang F, Chang L, Hu Y, et al. Synthesis and properties of in-situ bulk high impact polystyrene toughened by high cis-1,4 polybutadiene. Polymers. 2019;11:11050791.
   Web of Science ®Google Scholar
• Katančić Z, Travaš-Sejdić J, Hrmjak-Murgić Z, et al. Thermal decomposition of fire-retarded high-impact polystyrene and high-impact polystyrene/ethylene–vinyl acetate blend nanocomposites followed by thermal analysis. J Elastom Plast. 2014;46:233–252.
   Web of Science ®Google Scholar
• Corral FS, Morales G, Acuňa P, et al. Synthesis and characterization of high impact polystyrene from a heterogeneous styrene-rubber-polystyrene solution: influence of PS concentration on the phase inversion, morphology and impact strength. Macromol Symp. 2013;325–326:177–183.
   Google Scholar
• Zhang J, Wang X, Lu L, et al. Preparation and performance of high-impact polystyrene (HIPS)/nano-TiO2 nanocomposites. J Appl Polym Sci. 2003;87:381–385.
   Web of Science ®Google Scholar
• Yilmaz T, Sahin T, Sinmazcelik T. Fracture characteristics of high impact polystyrene under impact fatigue loadings. J Mater Sci. 2009;44:4308–4314.
   Web of Science ®Google Scholar
• Hobbs SY. The effect of rubber particle size on the impact properties of high impact polystyrene (HIPS) blends. Polym Eng Sci. 1986;26:74–81.
   Web of Science ®Google Scholar
• Juan L. Effect of multiwalled carbon nanotubes (MWNT) on the properties of high impact polystyrene (HIPS). J Nanomaterials. 2018;5:8305721.
   Google Scholar
• Marcourt M, Cassagnau P, Fulchiron R, et al. High impact polystyrene/CNT nanocomposites: application of volume segregation strategy and behavior under extensional deformation. Polymer. 2018;157:156–165.
   Web of Science ®Google Scholar
• Lin Y, Ng KM, Chan CM, et al. High-impact polystyrene/halloysite nanocomposites prepared by emulsion polymerization using sodium dodecyl sulfate as surfactant. J Colloid Interface Sci. 2011;358:423–429.
   PubMed Web of Science ®Google Scholar
• Fu G, Xia Z, Jiang J, et al. Fabrication and characterization of nanocomposites with high-impact polystyrene and hydroxyapatite with well-defined polystyrene via ATRP. J Reinf Plast Comp. 2011;30:1445–1453.
   Web of Science ®Google Scholar
• Hwang SJ, Joo YL, Lee SJ. Properties of high-impact polystyrene/organoclay nanocomposites synthesized via in situ polymerization. J Appl Polym Sci. 2008;110:1441–1450.
   Web of Science ®Google Scholar
• Chatterjee A, Mishra S. Nano-calcium carbonate (CaCO3)/polystyrene (PS) core-shell nanoparticle: it’s effect on physical and mechanical properties of high impact polystyrene (HIPS). J Polym Res. 2013;20:249.
   Web of Science ®Google Scholar
• Amani M, Sharif M, Kashkooli A, et al. Effect of mixing conditions on the selective localization of graphite oxide and the properties of polyethylene/high-impact polystyrene/graphite oxide nanocomposite blends. RSC Adv. 2015;5:77723–77733.
   Web of Science ®Google Scholar
• Wang Z, Li G, Peng H, et al. Study on novel antibacterial high-impact polystyrene/TiO2 nanocomposites. J Mater Sci. 2005;40:6433–6438.
   Web of Science ®Google Scholar
• Bogdan J, Jackowska-Tracz A, Zarzyńska J, et al. Chances and limitations of nanosized titanium dioxide practical application in view of its physicochemical properties. Nanoscale Res Lett. 2015;10:57.
   PubMed Web of Science ®Google Scholar
• Ghasemi FA, Daneshpayeh S, Ghasemi I. Multi-response optimization of impact strength and elongation at break of nanocomposites based on polypropylene/polyethylene binary polymer matrix in the presence of titanium dioxide nanofiller. J Elastom Plast. 2017;49:633–649.
   Web of Science ®Google Scholar
• Boonmahitthisud A, Pokphat P, Chaiwutthinan P, et al. Nanocomposites of NR/SBR blend prepared by latex casting method: effects of nano-TiO2 and polystyrene-encapsulated nano-TiO2 on the cure characteristics, physical properties, and morphology. J Nanomater. 2017;2017:1–11.
   Web of Science ®Google Scholar
• Chuayjuljit S, Neeranatmanit K, Boonmahitthisud A. Property improvement of plasticized poly(vinyl chloride) by nano-TiO2 and poly(methyl methacrylate)-encapsulated nano-TiO2. J Vinyl Addit Technol. 2016;22:433–440.
   Web of Science ®Google Scholar
• Jiang B, Zu Z, Tang F, et al. Surface modification on nanoscale titanium dioxide by radiation: preparation and characterization. J Appl Polym Sci. 2006;100:3510–3518.
   Web of Science ®Google Scholar
• Boonmahitthisud A, Chuayjuljit S. Effects of nanosized polystyrene and polystyrene-encapsulated nanosilica on Physical properties of natural rubber/styrene butadiene rubber nanocomposites. Polym Plast Technol Eng. 2012;51:311–316.
   Web of Science ®Google Scholar
• Chuayjuljit S, Sukasem N, Boonmahitthisud A. Effects of silica, poly(methyl methacrylate) and poly(methyl methacrylate)-grafted-silica nanoparticles on the physical properties of plasticized-poly(vinyl chloride). Polym Plast Technol Eng. 2014;53:116–122.
   Web of Science ®Google Scholar
• Metanawin S, Panutumron P, Thongsale A, et al. The functionalization of hybrid titanium dioxide by miniemulsion polymerization technique. Mater Today: Proc. 2018;5:9651–9657.
   Google Scholar
• Liu F, Liu G. Tio2–SiO2 composite nanoparticles containing hindered amine light stabilizers encapsulated by MMA–PMPM copolymers. Iranian Polym J. 2017;26:785–795.
   Web of Science ®Google Scholar
• Cheng S, Bocharova V, Belianinov A, et al. Unraveling the mechanism of nanoscale mechanical reinforcement in glassy polymer nanocomposites. Nano Lett. 2016;16:3630–3637.
   PubMed Web of Science ®Google Scholar
• Lee JS, Hwang GH, Kwon YS, et al. Impacts of cellulose nanofibril and physical aging on the enthalpy relaxation behavior and dynamic mechanical thermal properties of Poly (lactic acid) composite films. Polymer. 2020;2020:122677.
   Google Scholar