Spray-formed polyurea composites filled with basalt powder as inorganic waste filler

References

• Primeaux DJ. Polyurea-based coatings. Prot Org Coatings, ASM Int. 2015: 118–131. doi:10.31399/asm.hb.v05b.a0006047.
   Google Scholar
• Tripathi M, Parthasarathy S, Roy PK. Spray processable polyurea formulations: effect of chain extender length on material properties of polyurea coatings. J Appl Polym Sci. 2020;137:48573, doi:10.1002/app.48573.
   Web of Science ®Google Scholar
• Iqbal N, Tripathi M, Parthasarathy S, et al. Polyurea coatings for enhanced blast-mitigation: a review. RSC Adv. 2016;6:109706–17. doi:10.1039/C6RA23866A.
   Web of Science ®Google Scholar
• Mayer P, Dmitruk A, Leja N, et al. Pull-off strength of fibre-reinforced composite polymer coatings on steel substrate. J Adhes. 2020: 1–19. doi:10.1080/00218464.2020.1831478.
   Web of Science ®Google Scholar
• Mayer P, Dmitruk A, Pach J. Impact and adhesion tests of composite polymer coatings nn steel substrate. Compos Theory Pract. 2018;18:156–161.
   Web of Science ®Google Scholar
• Duda M, Pach J, Lesiuk G. Influence of polyurea composite coating on selected mechanical properties of AISI 304 steel. Materials (Basel). 2019;12:3137, doi:10.3390/ma12193137.
   Google Scholar
• Ozaki M, Kobayashi A, Sato Y, et al. Basic bond characteristics of FRP strand sheet-concrete interface with polyurea resin. J Adv Concr Technol. 2020;18:505–520. doi:10.3151/jact.18.505.
   Web of Science ®Google Scholar
• Chen Y, Wang B, Zhang B, et al. Polyurea coating for foamed concrete panel: an efficient way to resist explosion. Def Technol. 2020;16:136–149. doi:10.1016/j.dt.2019.06.010.
   Web of Science ®Google Scholar
• Rijensky O, Rittel D. Experimental investigation of polyurea coated aluminum plates under strong hydrodynamic shocks. Thin-Walled Struct. 2020;154:106833, doi:10.1016/j.tws.2020.106833.
   Web of Science ®Google Scholar
• Xue L, Mock W, Belytschko T. Penetration of DH-36 steel plates with and without polyurea coating. Mech Mater. 2010;42:981–1003. doi:10.1016/j.mechmat.2010.08.004.
   Web of Science ®Google Scholar
• Komurlu E, Kesimal A. Improved performance of rock bolts using sprayed polyurea coating. Rock Mech Rock Eng. 2015;48:2179–2182. doi:10.1007/s00603-014-0696-4.
   Web of Science ®Google Scholar
• House DW, Scott R V, Leon JF. The use of UV stabilizers in aliphatic polyurea coatings. 2003 n.d.
   Google Scholar
• Szafran J, Matusiak A.. Polyurea coating systems: definition, research, applications. in Lightweight Structures In Civil Engineering Contemporary Problems, Olsztyn (Poland), 2 December 2016.
   Google Scholar
• Qiao J, Wu G. Tensile properties of fly ash/polyurea composites. J Mater Sci. 2011;46:3935–3941. doi:10.1007/s10853-011-5318-x.
   Web of Science ®Google Scholar
• Petre R, Zecheru T, Petrea N, et al. Polyurea-based hybrid composites for CBRN protection. Mater Plast. 2019;56:715–722.
   Web of Science ®Google Scholar
• Pakuła D, Dobrosielska M, Sztorch B, et al. Microsilica filler for polyurea systems. Compos Theory Pract. 2019;19:76–82.
   Web of Science ®Google Scholar
• Vulcan MA, Damian C, Stanescu PO, et al. Polymeric composites based on polyurea matrix reinforced with carbon nanotubes. Mater Plast. 2017;54:41–44. doi:10.37358/MP.17.1.4781.
   Web of Science ®Google Scholar
• Barczewski M, Biedrzycka K, Mysiukiewicz O, et al. Milled basalt fibers as reinforcement for polyurea composite spray coatings with improved thermomechanical stability and mechanical performance. Polimery. 2020;65:184–195. doi:10.14314/polimery.2020.3.3.
   Web of Science ®Google Scholar
• Qiao J, Wu Y, Li L. Effect of filler content on the stress relaxation behavior of fly ash/polyurea composites. Polym Test. 2020;81:106168, doi:10.1016/j.polymertesting.2019.106168.
   Web of Science ®Google Scholar
• Nantasetphong W, Jia Z, Amirkhizi A V, et al. Dynamic properties of polyurea-milled glass composites part I: experimental characterization. Mech Mater. 2016;98:142–153. doi:10.1016/j.mechmat.2016.04.005.
   Web of Science ®Google Scholar
• Oddy A, Lebar A, Aguiar R, et al. Spall strength measurement of spray polyurea and alumina reinforced spray polyurea composite. In AIP Conference Proceedings, vol. 2272, no. 1, p. 120019. AIP Publishing LLC, 2020. doi:10.1063/12.0000909.
   Google Scholar
• Zhao X, Wang X, Wu Z, et al. Temperature effect on fatigue behavior of basalt fiber-reinforced polymer composites. Polym Compos. 2019;40:2273–2283. doi:10.1002/pc.25035.
   Google Scholar
• Chatiras N, Georgiopoulos P, Christopoulos A, et al. Thermomechanical characterization of basalt fiber reinforced biodegradable polymers. Polym Compos. 2019;40:4340–4350. doi:10.1002/pc.25295.
   Web of Science ®Google Scholar
• Korol J, Hejna A, Burchart-Korol D, et al. Water footprint assessment of selected polymers, polymer blends, composites, and biocomposites for industrial application. Polymers (Basel). 2019;11:1791, doi:10.3390/polym11111791.
   Web of Science ®Google Scholar
• Tabi T, Tamas P, Kovacs JG. Chopped basalt fibres: a new perspective in reinforcing poly(lactic acid) to produce injection moulded engineering composites from renewable and natural resources. Express Polym Lett. 2013;7:107–119. doi:10.3144/expresspolymlett.2013.11.
   Web of Science ®Google Scholar
• Tábi T, Bakonyi P, Hajba S, et al. Creep behaviour of injection-moulded basalt fibre reinforced poly(lactic acid) composites. J Reinf Plast Compos. 2016;35:1600–1610. doi:10.1177/0731684416661239.
   Web of Science ®Google Scholar
• Demirci İ, Avcı A, Demirci MT. Investigation of nano-hybridization effects on low velocity impact behaviors of basalt fiber reinforced composites. J Compos Mater. 2020; doi:10.1177/0021998320949640.
   Google Scholar
• Wei B, Song S, Cao H. Strengthening of basalt fibers with nano-SiO2–epoxy composite coating. Mater Des. 2011;32:4180–4186. doi:10.1016/j.matdes.2011.04.041.
   Web of Science ®Google Scholar
• Dobiszewska M, Schindler AK, Pichór W. Mechanical properties and interfacial transition zone microstructure of concrete with waste basalt powder addition. Constr Build Mater. 2018;177:222–229. doi:10.1016/j.conbuildmat.2018.05.133.
   Web of Science ®Google Scholar
• Dobiszewska M, Beycioğlu A. Investigating the influence of waste basalt powder on selected properties of cement paste and mortar. IOP Conf Ser Mater Sci Eng. 2017;245:022027, doi:10.1088/1757-899X/245/2/022027.
   Google Scholar
• Nunes JMG, Kautzmann RM, Oliveira C. Evaluation of the natural fertilizing potential of basalt dust wastes from the mining district of Nova Prata (Brazil). J Clean Prod. 2014;84:649–656. doi:10.1016/j.jclepro.2014.04.032.
   Web of Science ®Google Scholar
• Kurańska M, Barczewski M, Uram K, et al. Basalt waste management in the production of highly effective porous polyurethane composites for thermal insulating applications. Polym Test. 2019;76:90–100. doi:10.1016/j.polymertesting.2019.02.008.
   Web of Science ®Google Scholar
• Mahesh Babu S, Venkateswara Rao M. Effect of basalt powder on mechanical properties and dynamic mechanical thermal analysis of hybrid epoxy composites reinforced with glass fiber. J Chinese Adv Mater Soc. 2018;6:311–328. doi:10.1080/22243682.2018.1470030.
   Google Scholar
• Matykiewicz D, Barczewski M. On the impact of flax fibers as an internal layer on the properties of basalt-epoxy composites modified with silanized basalt powder. Compos Commun. 2020;20:100360, doi:10.1016/j.coco.2020.100360.
   Web of Science ®Google Scholar
• Barczewski M, Sałasińska K, Kloziński A, et al. Application of the basalt powder as a filler for polypropylene composites with improved thermo-mechanical stability and reduced flammability. Polym Eng Sci. 2019;59:E71–E79. doi:10.1002/pen.24962.
   Web of Science ®Google Scholar
• Akinci A, Yilmaz S, Sen U. Wear behavior of basalt filled low density polyethylene composites. Appl Compos Mater. 2012;19:499–511. doi:10.1007/s10443-011-9208-9.
   Web of Science ®Google Scholar
• Todic A, Nedeljkovic B, Cikara D, et al. Particulate basalt–polymer composites characteristics investigation. Mater Des. 2011;32:1677–1683. doi:10.1016/j.matdes.2010.09.023.
   Web of Science ®Google Scholar
• Jyoti J, Singh BP, Arya AK, et al. Dynamic mechanical properties of multiwall carbon nanotube reinforced ABS composites and their correlation with entanglement density, adhesion, reinforcement and C factor. RSC Adv. 2016;6:3997–4006. doi:10.1039/C5RA25561A.
   Web of Science ®Google Scholar
• Einstein A, Furth R. Investigations on the theory of Brownian movement. New York (NY): Dover Publications; 1956.
   Google Scholar
• Zhang X, Zhou X, Ni H, et al. Surface modification of basalt fiber with organic/inorganic composites for biofilm carrier used in wastewater treatment. ACS Sustain Chem Eng. 2018;6:2596–2602. doi:10.1021/acssuschemeng.7b04089.
   Web of Science ®Google Scholar
• Arunkumar T, Ramachandran S. Surface coating and characterisation of polyurea for liquid storage. Int J Ambient Energy. 2017;38:781–787. doi:10.1080/01430750.2016.1222966.
   Web of Science ®Google Scholar
• Zhou Q, Cao L, Li Q, et al. Investigation of the curing process of spray polyurea elastomer by FTIR, DSC, and DMA. J Appl Polym Sci. 2012;125:3695–3701. doi:10.1002/app.36674.
   Web of Science ®Google Scholar
• Husic S. Thermal and mechanical properties of glass reinforced soy-based polyurethane composites. Compos Sci Technol. 2005;65:19–25. doi:10.1016/j.compscitech.2004.05.020.
   Web of Science ®Google Scholar
• Che K, Lyu P, Wan F, et al. Investigations on aging behavior and mechanism of polyurea coating in marine atmosphere. Materials (Basel). 2019;12:3636, doi:10.3390/ma12213636.
   Web of Science ®Google Scholar
• Ryszkowska J, Auguscik M, Kuranska M, et al. Preparation and characterization of poly(urea-urethane) elastomers synthetized from rapeseed oil-based polyols. part II. thermal properties. Polimery. 2017;62:136–143. doi:10.14314/polimery.2017.136.
   Web of Science ®Google Scholar