Behaviour of asphalt mixtures containing reclaimed asphalt pavement and asphalt shingle

REFERENCES

• Al-Qadi, I. L., Carpenter, S. H., Roberts, G. F., Ozer, H., Aurangzeb, Q., Elseifi, M., & Trepanier, J. (2009). Determination of usable residual asphalt binder in RAP (Research Report ICT-09-031). IL: Center for Transportation.
   Google Scholar
• Baaj, H., Di Benedetto, H., & Chaverot, P. (2005). Effect of binder characteristics on fatigue of asphalt pavement using an intrinsic damage approach. Road Materials and Pavement Design, 6(2), 147–174. doi: 10.1080/14680629.2005.9690003
   Web of Science ®Google Scholar
• Baaj, H., Ech, M., Lum, P., & Forfylow, R. W. (2011). Behaviour of asphalt mixes modified with ASM & RAP (vol. 25, pp. 461–481). Proceedings of the Canadian Technical Asphalt Association, Quebec City.
   Google Scholar
• Baaj, H., Ech, M., Tapsoba, N., Sauzéat, C., & Di Benedetto, H. (2013). Thermomechanical characterization of asphalt mixtures modified with high contents of asphalt shingle modifier (ASM®) and reclaimed asphalt pavement (RAP). Materials and Structures, 46(10), 1747–1763. doi: 10.1617/s11527-013-0015-7
   Web of Science ®Google Scholar
• Baaj, H., & Paradis, M. (2008). Use of post-fabrication asphalt shingles in stone matrix asphalt mix (SMA-10): Laboratory characterization and field experiment on autoroute 20 (vol. 19, pp. 365–384). Proceedings of the Canadian Technical Asphalt Association, Saskatoon.
   Google Scholar
• Delaporte, B., Di Benedetto, H., Chaverot, P., & Gauthier, G. (2009). Linear viscoelastic properties of bituminous materials including new products made with ultrafine particles. Road Materials and Pavement Design, 10(1), 7–38. doi: 10.1080/14680629.2009.9690180
   Web of Science ®Google Scholar
• Di Benedetto, H., & De la Roche, C. (1998). State of the art on stiffness modulus and fatigue of bituminous mixtures. Bituminous binders and mixes: State of the art and interlaboratory test on mechanical behavior and mix design (Rilem Report 17) (pp. 137–180). London: L. Francken, ed., E and FN Spon.
   Google Scholar
• Di Benedetto, H., De La Roche, C., Baaj, H., Pronk, A., & Lundström, R. (2004). Fatigue of bituminous mixtures. Materials and Structures, 15, 202–216. doi: 10.1007/BF02481620
   Web of Science ®Google Scholar
• Di Benedetto, H., Delaporte, B., & Sauzeat, C. (2007). Three dimensional linear behavior of bituminous materials: Experiments and modeling. International Journal of Geomechanics, 7, 149–157. doi: 10.1061/(ASCE)1532-3641(2007)7:2(149)
   Google Scholar
• Di Benedetto, H., Mondher, N., Sauzeat, C., & Olard F. (2007). Three-dimensional thermo-viscoplastic behaviour of bituminous materials – the DBN model. Road Materials and Pavement Design, 8(2), 285–315. 10.3166/RMPD.8.285-315
   Web of Science ®Google Scholar
• Di Benedetto, H., Nguyen, Q. T., & Sauzeat, C. (2011). Nonlinearity, heating, fatigue and thioxotropy during cyclic loading of asphalt mixtures. Road Materials and Pavements Design, 12(1), 129–158.
   Web of Science ®Google Scholar
• Di Benedetto, H., Sauzeat, C., & Sohm, J. (2009). Stiffness of bituminous mixtures using ultrasonic wave propagation. Road Materials and Pavement Design, 10(4), 789–814. 10.3166/RMPD.10.789-814 doi: 10.1080/14680629.2009.9690227
   Web of Science ®Google Scholar
• Ferry, J. D. (1980). Viscoelastic properties of polymers (3rd ed.). New York, NY: John Wiley & Sons.
   Google Scholar
• Ho, C.-H., & Romero, P. (2011). Using asphalt mixture beams in the bending beam rheometer. Road Materials and Pavement Design, 12(2), 293–314. 10.1080/14680629.2011.9695247
   Web of Science ®Google Scholar
• Homsi, F., Bodin, D., Yotte, S., Breysse, D., & Balay, J. M. (2012). Fatigue life modelling of asphalt pavements under multiple-axle loadings. Road Materials and Pavement Design, 13(4), 749–768. doi: 10.1080/14680629.2012.711924
   Web of Science ®Google Scholar
• Lum, P., Yonke, E., & Greco, M. (2004). Field and laboratory evaluation of manufactured shingle modifier in hot mix asphalt (vol. 28, pp. 449–477). Proceedings of the Canadian Technical Asphalt Association, Montreal.
   Google Scholar
• Lundström, R., Di Benedetto, H., & Isacsson, U. (2004). Influence of asphalt mixture stiffness on fatigue failure. Journal of Materials in Civil Engineering, 16(6), 516–525. doi: 10.1061/(ASCE)0899-1561(2004)16:6(516)
   Web of Science ®Google Scholar
• Mangiafico, S., Di Benedetto, H., Sauzéat, C., Olard, F., Pouget, S., & Planque, L. (2013). Influence of RAP content on complex modulus of asphalt binder blends and corresponding mixes: Experimental results and modelling. Road Materials and Pavement Design, 14(Suppl 1), 132–148. doi: 10.1080/14680629.2013.774751
   Web of Science ®Google Scholar
• Mangiafico, S., Di Benedetto, H., Sauzéat, C., Olard, F., Pouget, S., & Planque, L. (in press). New method to obtain viscoelastic properties of bitumen blends from pure and RAP binder constituents. Road Materials and Pavement Design, 15 10.1080/14680629.2013.870639
   Web of Science ®Google Scholar
• McDaniel, R. S., Shah, A., Huber, G. A., & Copeland, A. (2012). Effects of reclaimed asphalt pavement content and virgin binder grade on properties of plant produced mixtures. Road Materials and Pavement Design, 13(Suppl 1), 161–282. doi: 10.1080/14680629.2012.657066
   Web of Science ®Google Scholar
• Mogawer, W., Austerman, A., Mohammad, L., & Kutay, M. E. (2013). Evaluation of high RAP-WMA asphalt rubber mixtures. Road Materials and Pavement Design, 14(Suppl 2), 129–147. doi: 10.1080/14680629.2013.812846
   Web of Science ®Google Scholar
• Mogawer, W., Bennert, T., Daniel, J. S., Bonaquist, R., Austerman, A., & Booshehrian, A. (2012). Performance characteristics of plant produced high RAP mixtures. Road Materials and Pavement Design, 13(Suppl 1), 183–208. doi: 10.1080/14680629.2012.657070
   Web of Science ®Google Scholar
• Mounier, D., Di Benedetto, H., & Sauzeat, C. (2012). Determination of bituminous mixtures linear properties using ultrasonic wave propagation. Construction and Building Materials, 36, 638–647. doi: 10.1016/j.conbuildmat.2012.04.136
   Web of Science ®Google Scholar
• NF EN 12697-24, European Standard. (2012). Méthodes d'essai pour mélange hydrocarboné à chaud – Mélanges bitumineux – Partie 24: résistance à la fatigue (in French).
   Google Scholar
• NF EN 12697-33, European Standard. (2004). Mélanges bitumineux – Méthodes d'essai pour mélange hydrocarboné à chaud – Partie 33: Confection d’éprouvettes au compacteur de plaque (in French).
   Google Scholar
• NF P 98-082, French Standard (1994) Chaussées – Terrassements – Dimensionnement des chaussées routières – Détermination des trafics routiers pour le dimensionnement des structures de chaussée (in French).
   Google Scholar
• Nguyen, H. M., Pouget, S., Di Benedetto, H., & Sauzeat, C. (2009). Time-temperature superposition principle for bituminous mixtures. European Journal of Environmental and Civil Engineering, 13(9), 1095–1107. 10.3166/EJECE.13 doi: 10.1080/19648189.2009.9693176
   Web of Science ®Google Scholar
• Nguyen, M. L., Sauzéat, C., Di Benedetto, H., & Tapsoba, N. (2013). Validation of the time-temperature superposition principle for crack propagation in bituminous mixtures. Materials and Structures, 46(7), 1075–1087. doi: 10.1617/s11527-012-9954-7
   Web of Science ®Google Scholar
• Nguyen, Q. T., Di Benedetto, H., & Sauzéat, C. (2012). Determination of thermal properties of asphalt mixtures as another output from cyclic tension-compression test. Road Materials and Pavement Design, 13(1), 85–103. 10.1080/14680629.2011.64408 doi: 10.1080/14680629.2011.644082
   Web of Science ®Google Scholar
• Nguyen, Q. T., Di Benedetto, H., Sauzéat, C., & Tapsoba, N. (2013). Time temperature superposition principle validation for bituminous mixes in the linear and nonlinear domains. Journal of Materials in Civil Engineering, 25(9), 1181–1188. doi: 10.1061/(ASCE)MT.1943-5533.0000658
   Web of Science ®Google Scholar
• Olard, F., & Di Benedetto, H. (2003). General ‘2S2P1D’ model and relation between the linear viscoelastic behaviors of bituminous binders and mixes. Road Materials and Pavement Design, 4(2), 185–224.
   Google Scholar
• Pasetto, M., & Baldo, N. (2012). Laboratory investigation on foamed bitumen bound mixtures made with steel slag, foundry sand, bottom ash and reclaimed asphalt pavement. Road Materials and Pavement Design, 13(4), 691–712. doi: 10.1080/14680629.2012.742629
   Web of Science ®Google Scholar
• Pouget, S., Sauzeat, C., Di Benedetto, H., & Olard, F. (2010a). From the behavior of constituent materials to the calculation and design of orthotropic bridge structures [Special Issue: EATA 2010]. Road Materials and Pavement Design, 11, 111–144. 10.3166/RMPD.11HS doi: 10.1080/14680629.2010.9690329
   Web of Science ®Google Scholar
• Pouget, S., Sauzéat, C., Di Benedetto, H., & Olard, F. (2010b). Numerical simulation of the five-point bending test designed to study bituminous wearing courses on orthotropic steel bridge. Materials and Structures, 43(3), 319–330. 10.1617/s11527-009-9491-1 doi: 10.1617/s11527-009-9491-1
   Web of Science ®Google Scholar
• Pouget, S., Sauzeat, C., Di Benedetto, H., & Olard, F. (2012). Modeling of viscous bituminous wearing course materials on orthotropic steel deck. Materials and Structures, 45(7), 1115–1125. doi: 10.1617/s11527-011-9820-z
   Web of Science ®Google Scholar
• Pronk, A. C., & Hopman, P. C. (1990). Energy dissipation: The leading factor of fatigue. In the highway research: Sharing the benefits (pp. 255–267). Proceedings of the Conference of the United States Strategic Highway Research Program, London.
   Google Scholar
• Shen, S., & Sutharsan, T. (2011). Quantification of cohesive healing of asphalt binder and its impact factors based on dissipated energy analysis. Road Materials and Pavement Design, 12(3), 525–546. doi: 10.1080/14680629.2011.9695259
   Web of Science ®Google Scholar
• Sias Daniel, J., Gibson, N., Tarbox, S., Copeland, A., & Andriescu, A. (2013). Effect of long-term ageing on RAP mixtures: Laboratory evaluation of plant-produced mixtures. Road Materials and Pavement Design, 14(Suppl 2), 173–192. doi: 10.1080/14680629.2013.812840
   Web of Science ®Google Scholar
• Stroup-Gardiner, M., & Wagner, C. (2007). Use of reclaimed asphalt pavement in superpave hot-mix asphalt applications. Transportation Research Board, 1681, 1–9. doi: 10.3141/1681-01
   Google Scholar
• Tapsoba, N., Sauzeat, C., & Di Benedetto, H. (2013). Analysis of fatigue test for bituminous mixtures. Journal of Material in Civil Engineering, 25(6), 701–710. doi: 10.1061/(ASCE)MT.1943-5533.0000636
   Web of Science ®Google Scholar
• Tiouajni, S., Di Benedetto, H., Sauzeat, C., & Pouget, S. (2011). Approximation of linear viscoelastic model in the 3 dimensional case with mechanical analogues of finite size. Road Materials and Pavement Design, 12(4), 897–930. 10.3166/RMPD.12
   Web of Science ®Google Scholar
• Van Rompu, J., Di Benedetto, H., Buannic, M., Gallet, T., & Ruot, C. (2012). New fatigue test on bituminous binders: Experimental results and modelling. Construction and Building Materials, 37, 197–208. doi: 10.1016/j.conbuildmat.2012.02.099
   Web of Science ®Google Scholar
• Visintine, B., Khosla, N. P., & Tayebali, A. (2013). Effects of higher percentage of recycled asphalt pavement on pavement performance. Road Materials and Pavement Design, 14(2), 432–437. doi: 10.1080/14680629.2013.779310
   Web of Science ®Google Scholar
• Wu, H., Huang, B., & Shu, X. (2012). Characterizing viscoelastic properties of asphalt mixtures utilizing loaded wheel tester (LWT). Road Materials and Pavement Design, 13(Suppl 1), 38–55. doi: 10.1080/14680629.2012.657049
   Web of Science ®Google Scholar
• Yin, H. M., Buttlar, W. G., Paulino, G. H., & Di Benedetto, H. (2008). Assessment of existing micro-mechanical models for asphalt mastics considering viscoelastic effects. Road Materials and Pavement Design, 9(1), 31–57. doi: 10.1080/14680629.2008.9690106
   Web of Science ®Google Scholar
• Yonke, E., Lum, P., Budd, D., Uzarowski, L., & Emery, J. (1999). Evaluation of manufactured shingle modifier asphalt mixes (vol. 44, pp. 175–197). Proceedings of the Canadian Technical Asphalt Association, Quebec City.
   Google Scholar