Performance of cold recycling materials with foamed bitumen and increasing percentage of reclaimed asphalt pavement

References

• Anderson, D. A., Christensen, D. W., Bahia, H. U., Dongre, R., Sharma, M. G., & Antle, C. E. (1994). Binder characterization and evaluation: Volume 3 physical characterization (Report No. SHRP-A-369). Washington, DC: National Research Council.
   Google Scholar
• Asphalt Academy. 2009. A guideline for the design and construction of bitumen emulsion and foamed bitumen stabilised materials (2nd ed.). Pretoria: Technical Guideline (TG2).
   Google Scholar
• Caro, S., Masad, E., Bhasin, A., & Little, D. N. (2008). Moisture susceptibility of asphalt mixtures, Part 1: mechanisms, Part 2: Characterisation and modelling. International Journal of Pavement Engineering, 9(2), 81–98. doi: 10.1080/10298430701792128
   Google Scholar
• Ebels. L. J. (2008). Characterisation of materials properties and rehabilitation of cold bituminous mixture for road pavements (PhD dissertation). University of Stellenbosch, South Africa.
   Google Scholar
• Emery, S. J. (1988). The prediction of moisture content in untreated pavement layers and an application to design in Southern Africa (CSIR Research Report No. 644). Pretoria: Division of Roads and Transport Technology. DRTT Bulletin 20.
   Google Scholar
• Fu, P., Jones, D., Harvey, J. T., & Bukhari, S. A. (2010). Laboratory testing methods for foamed asphalt mix resilient modulus. Road Materials and Pavement Design, 10(1), 187–212. doi: 10.3166/rmpd.10.187-212
   Web of Science ®Google Scholar
• Jenkins, K. J. 2000. Mix design considerations for cold and half-cold bituminous mixes with emphases on foamed bitumen (PhD Thesis). University of Stellenbosch, South Africa.
   Google Scholar
• Jenkins, K. J., Ebels, L. J., & Long, F. M. (2007). Foamed bitumen performance? International Journal of Pavement Engineering, 8(2), 85–98. doi: 10.1080/10298430601149718
   Google Scholar
• Jenkins, K. J., Ebels, L. J., & Twagira, E. M. (2005). Performance models of bitumen emulsion treated materials for Koch pavement solutions ( Technical Report No, pp. 1–41). Stellenbosch: Stellenbosch University Institute for Transport Technology.
   Google Scholar
• Jenkins, K. J., Ebels, L. J., Twagira, M. E., Kelfkens, R. W., Moloto, P., & Mulusa, W. K. (2008). Updating bituminous stabilised materials guideline: Mix design report, phase II (Research Report). Pretoria: SABITA and Gautrans.
   Google Scholar
• Jenkins, K. J, Twagira, M. E, Kelfkens, R. W., & Mulusa, W. K. (2012). New laboratory testing procedures for mix design and classification of bitumen-stabilised materials. Road Materials and Pavement Design, 13(4), 618–641. doi: 10.1080/14680629.2012.742625
   Web of Science ®Google Scholar
• Kanitpong, K., Benson, C. H., & Bahia, H. U. (2001). Hydraulic conductivity and permeability of laboratory compacted asphalt mixtures. Transp. Res. Rec., No. 1767, Paper No. 01-2997, pp. 25–32.
   Google Scholar
• Kelfkens, R. W. C. (2008). Vibratory hammer compactor of bitumen stabilised materials (MSc thesis). University of Stellenbosch, South Africa.
   Google Scholar
• Kuvhanganani, L. T. (2008). Moisture sensitivity of selected foamed bitumen-treated Materials (Master's degree in technology). Pavement Engineering, Tshwane University of Technology, Pretoria, South Africa.
   Google Scholar
• Land Transport New Zealand. (2005). The waterproofness of first coat chipseals. Research Report Style Guide (Report, p. 35). Auckland, New Zealand: Land Transport New Zealand.
   Google Scholar
• Malubila, S. M. (2005). Curing of foamed bitumen mixes (Master's thesis). University of Stellenbosch, South Africa.
   Google Scholar
• Roberts, F. L., Kandhal, P. S., Ray, B. E., Lee, D. Y., & Kennedy, T. W. (1996). Hot mix asphalt materials, mixture design and construction. Lanham, MD: NAPA, Research and Education Foundation.
   Google Scholar
• Santagata, E., Chiappinelli, G., Riviera, P. P., & Baglieri, O. (2010). Triaxial testing for the short term evaluation of cold-recycled bituminous mixtures. Road Materials and Pavement Design, 11(1), 123–147.
   Web of Science ®Google Scholar
• Stimilli, A., Ferrotti, G., Graziani, A., & Canestrari, F. (2013). Performance evaluation of a cold-recycled mixture containing high percentage of reclaimed asphalt. Road Materials and Pavement Design, 14(suppl 1.), 149–161. doi: 10.1080/14680629.2013.774752
   Web of Science ®Google Scholar
• Technical Methods for Highways. (1986). Standard methods of testing road construction materials. (TMH 1). Pretoria: National Institute for Transport and Road Research.
   Google Scholar
• Terrel, R. L., & Al-Swailmi, S. (1994). Water sensitivity of asphalt-aggregate mixes, test development (Report No. SHRP-A-403). USA.
   Google Scholar
• Twagira, E. M. (2010). Influence of durability properties on performance of bitumen stabilised materials (PhD (Eng) dissertation). University of Stellenbosch, South Africa.
   Google Scholar