Modified repeated load tri-axial test for the high-temperature performance evaluation of HMA

References

• Ahmed, A. W., & Erlingsson, S. (2013). Evaluation of permanent deformation models for unbound granular materials using accelerated pavement tests. Road Materials and Pavement Design, 14(1), 178–195. doi: 10.1080/14680629.2012.755936
   Web of Science ®Google Scholar
• Apeagyei, A. K. (2011). Correlating rutting with dynamic modulus of asphalt concrete. Proceedings of the ICE – Transport, 164(4), 241–249.
   Google Scholar
• Blanc, J., Gabet, T., Hornych, P., Piau, J.-M., & Di Benedetto, H. (2015). Cyclic triaxial tests on bituminous mixtures. Road Materials and Pavement Design, 16, 46–69. doi: 10.1080/14680629.2014.964293
   Web of Science ®Google Scholar
• Chehab, G. R., & Tang, X. C. (2012). The use of a multi-set-up, reduced-scale accelerated trafficking simulator for evaluating roadway systems and products. International Journal of Pavement Engineering, 13(6), 535–552. doi: 10.1080/10298436.2011.633168
   Web of Science ®Google Scholar
• Chen, X. W., Huang, B. S., & Xu, Z. H. (2007). Comparison between flat rubber wheeled loaded wheel tester and asphalt pavement analyzer. Road Materials and Pavement Design, 8(3), 595–604. doi: 10.1080/14680629.2007.9690090
   Web of Science ®Google Scholar
• Collins, R., Shami, H., & Lai, J. S. (1996). Use of Georgia loaded wheel tester to evaluate rutting of asphalt samples prepared by superpave gyratory compactor. Transportation Research Record: Journal of the Transportation Research Board, 1545, 161–168. doi: 10.3141/1545-21
   Google Scholar
• Doyle, J. D., & Howard, I. L. (2013). Rutting and moisture damage resistance of high reclaimed asphalt pavement warm mixed asphalt: Loaded wheel tracking vs. conventional methods. Road Materials and Pavement Design, 14(Suppl. 2), 148–172. doi: 10.1080/14680629.2013.812841
   Web of Science ®Google Scholar
• Fwa, T. F., & Tan, S. A. (1992). Laboratory evaluation of rutting potential of asphalt mixtures. ASTM Special Technical Publication, 1147, 211–224.
   Google Scholar
• Gabet, T., Di Benedetto, H., Perraton, D., De Visscher, J., Gallet, T., Bańkowski, W., … Sauzéat, C. (2011). French wheel tracking round robin test on a polymer modified bitumen mixture. Materials and Structures, 44, 1031–1046. doi: 10.1617/s11527-011-9733-x
   Web of Science ®Google Scholar
• Goh, S., You, Z., Williams, R., & Li, X. (2011). Preliminary dynamic modulus criteria of HMA for field rutting of asphalt pavements: Michigan's experience. Journal of Transportation Engineering, 137(1), 37–45. doi: 10.1061/(ASCE)TE.1943-5436.0000191
   Web of Science ®Google Scholar
• Gu, X. Y., Yuan, Q. Q., & Ni, F. J. (2012). Analysis of factors on asphalt pavement rut development based on measured load and temperature gradient. China Journal of Highway and Transport, 25(6), 30–36. (In Chinese)
   Google Scholar
• Hajj, E., Ulloa, A., Siddharthan, R., & Sebaaly, P. E. (2010). Estimation of stress condition for the flow number simple performance test. Transportation Research Record, 2181, 67–78. Retrieved from http://dx.doi.org/10.3141/2181-08
   Google Scholar
• Howard, I. L., Doyle, J. D., White, T. D., & Ivy, J. (2010). PURWheel laboratory wheel tracker operator's manual (Report: CMRC M 10–2 Version 1). Oktibbeha, MI: Mississippi State University.
   Google Scholar
• Hussain, J., Wilson, D., Henning, T., & Alabaster, D. (2014). Comparing results between the repeated load triaxial test and accelerated pavement test on unbound aggregate. Journal of Materials in Civil Engineering, 26(3), 476–483. doi: 10.1061/(ASCE)MT.1943-5533.0000822
   Web of Science ®Google Scholar
• Jackson, N. M., & Baldwin, C. D. (2000). Assessing the relative rutting susceptibility of HMA in the laboratory with the asphalt pavement analyzer. International Journal of Pavement Engineering, 1(3), 203–217. doi: 10.1080/10298430008901706
   Google Scholar
• Kandhal, P. S., Petersen, D. R., Link, R. E., Wu, Y., Parker, F., & Spellerberg, P. A. (1996). Precision of Marshall stability and flow test using 6-in. (152.4-mm) diameter specimens. Journal of Testing and Evaluation, 24(1), 20–25. doi: 10.1520/JTE11284J
   Web of Science ®Google Scholar
• Kawamura, N., Kawana, F., & Maekawa, R. (2012). Stability of runway grooving under repeated large aircraft loads. Engineering Journal, 16(4), 127–136. doi: 10.4186/ej.2012.16.4.127
   Google Scholar
• Roy, N., Veeraragavan, A., & Krishnan, M. J. (2013). Interpretation of flow number test data for asphalt mixtures. Proceedings of the ICE – Transport, 168(3), 191–199. doi:10.1680/tran.12.00070
   Google Scholar
• Rushing, J. F., & Little, D. N. (2014). Static creep and repeated load as rutting performance tests for airport HMA mix design. Journal of Materials in Civil Engineering, 26(9), 1–8. doi: 10.1061/(ASCE)MT.1943-5533.0000952
   Web of Science ®Google Scholar
• Sohm, J., Gabet, T., Hornych, P., Piau, J.-M., & Di Benedetto, H. (2012). Creep tests on bituminous mixtures and modelling. Road Materials and Pavement Design, 13, 832–849. doi: 10.1080/14680629.2012.735795
   Web of Science ®Google Scholar
• Walubita, L. F., Zhang, J., Alvarez, A. E., & Hu, X. (2013). Exploring the flow number (FN) index as a means to characterise the HMA permanent deformation response under FN testing. Journal of the South African Institution of Civil Engineering, 55(3), 103–112.
   Web of Science ®Google Scholar
• Witczak, M. W., Kaloush, K., Pellinen, T., & El-Basyouny, M. (2011). Simple performance test for superpave mix design (NCHRP Report 465). Washington, DC: National Research Council.
   Google Scholar
• Wu, H., Huang, B. S., & Shu, X. (2014). Characterizing fatigue behavior of asphalt mixtures utilizing loaded wheel testers. Journal of Materials in Civil Engineering, 26, 152–159. doi: 10.1061/(ASCE)MT.1943-5533.0000791
   Web of Science ®Google Scholar
• Wu, Z. S., Wang, X., & Wu, G. (2012). Advancement of structural safety and sustainability with basalt fiber reinforced polymers. Proceedings of CICE 2012 6th International Conference on FRP Composites in Civil Engineering, Rome, Italy, June 13–15, p. 29.
   Google Scholar
• Xu, Q. W., & Mohammad, L. N. (2008). Modeling asphalt pavement rutting under accelerated testing. Road Materials and Pavement Design, 9(4), 665–687. doi: 10.1080/14680629.2008.9690144
   Web of Science ®Google Scholar
• Yu, B., Lu, Q., & Yang, J. (2013). Evaluation of anti-reflective cracking measures by laboratory test. International Journal of Pavement Engineering, 14(6), 553–560. doi: 10.1080/10298436.2012.721547
   Web of Science ®Google Scholar