Effect of tyre powder penetration on stress and stability of the road embankments

References

• Ahmed, I. (1993). Laboratory study on properties of rubber soils. Part of an investigation conducted by the joint highway research project engineering experiment station Purdue University (Final report).
   Google Scholar
• Ahmed, I., & Lovell, C. W. (1993). Rubber soils as lightweight geomaterials. Transportation Research Record, 1422, 61--70.
   Google Scholar
• ASTM D429-02. (2002). Standard test methods for rubber property-adhesion to rigid substrates. Washington, DC: American Society for Testing and Materials.
   Google Scholar
• ASTM D422-63. (2007). Standard test method for particle-size analysis of soils. Washington, DC: American Society for Testing and Materials.
   Google Scholar
• ASTM D624-00. (2012). Standard test method for tear strength of conventional vulcanized rubber and thermoplastic elastomers. Washington, DC: American Society for Testing and Materials.
   Google Scholar
• ASTM D698-12. (2012). Standard test methods for laboratory compaction characteristics of soil using standard effort (12 400 ft-lbf/ft3 (600 kN-m/m3)). Washington, DC: American Society for Testing and Materials.
   Google Scholar
• ASTM D395-14. (2014). Standard test methods for rubber property – compression set. Washington, DC: American Society for Testing and Materials.
   Google Scholar
• ASTM D1557-12e1. (2012). Standard test methods for laboratory compaction characteristics of soil using modified effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)). Washington, DC: American Society for Testing and Materials.
   Google Scholar
• ASTM D1630-06. (2006). Standard test method for rubber property-abrasion resistance (footwear abrader). Washington, DC: American Society for Testing and Materials.
   Google Scholar
• ASTM D1817-05. (2011). Standard test method for rubber chemicals-density. Washington, DC: American Society for Testing and Materials.
   Google Scholar
• ASTM D2632-14. (2015). Standard test method for rubber property – Resilience by vertical rebound. Washington, DC: American Society for Testing and Materials.
   Google Scholar
• ASTM D3080/D3080M-11. (2011). Standard test method for direct shear test of soils under consolidated drained conditions. Washington, DC: American Society for Testing and Materials.
   Google Scholar
• ASTM D4527-99. (2011). Standard test method for carbon black – Solvent extractables. Washington, DC: American Society for Testing and Materials.
   Google Scholar
• ASTM D5644-01. (2008). Standard test methods for rubber compounding materials determination of particle size distribution of recycled vulcanizate particulate rubber. Washington, DC: American Society for Testing and Materials.
   Google Scholar
• ASTM D6854-12a. (2012). Standard test method for silica-oil absorption number. Washington, DC: American Society for Testing and Materials.
   Google Scholar
• Attom, M. F. (2006). The use of shredded waste tires to improve the geotechnical engineering properties of sands. Environmental Geology, 49(4), 497–503. doi: 10.1007/s00254-005-0003-5
   Web of Science ®Google Scholar
• BS 410. (1986). Specification for test sieves. British Standards Institute.
   Google Scholar
• BS 1377-3. (1990). Methods of test for soils for civil engineering purposes. Chemical and electro-chemical tests. British Standards Institute.
   Google Scholar
• California Department of Transportation, Highway Design Manual. (2014). Retrieved from http://www.dot.ca.gov/hq/oppd/hdm/hdmtoc.htm (pp. 14–15).
   Google Scholar
• Chen, D. H., Lin, D. F., Liau, P. H., & Bilyeu, J. (2005). A correlation between dynamic cone penetrometer value and pavement layer moduli. Geotechnical Testing Journal, 28(1), 1–8.
   Web of Science ®Google Scholar
• Danistan, J., & Vilpulanandan, C. (2009). Relationship between CBR values (unsoaked) and undrained shear strength of artificial CH soils. Paper presented at the CIGMAT-2009 conference and exhibition, University of Houston, Houston, TX.
   Google Scholar
• Das, B. M. (2011). Principles of foundation engineering, SI (7th ed.). Stamford, CT: CENAGE Learning.
   Google Scholar
• Edeskär, T. (2004). Technical and environmental properties of tire shreds focusing on ground engineering applications. Department of soil Mechanics and Foundation Engineering, Division of Structural Engineering, Luleå University of Technology.
   Google Scholar
• Edinçliler, A. (2008). Using waste tire-soil mixtures for embankment construction. Paper presented at international workshop on scrap tire derived geomaterials “Opportunities and Challenges”. Kanto Branch of Japanese Geotechnical Society, Japan, 319–328.
   Google Scholar
• Edinçliler, A., Baykal, G., & Saygılı, A. (2010). Influence of different processing techniques on the mechanical properties of used tires in embankment construction. Journal of Waste Management, 30(6), 1073–1080. doi:org/10.1016/j.wasman.2009.09.031
   PubMed Web of Science ®Google Scholar
• EPA. (2014). United States Environmental Protection Agency. Retrieved from www.epa.gov
   Google Scholar
• Foose, G. J., Benson, C. H., & Bosscher, P. J. (1996). Sand reinforced with shredded waste tires. Journal of Geotechnical Engineering, 122(9), 760–767. doi: 10.1061/(ASCE)0733-9410(1996)122:9(760)
   Google Scholar
• Ghazavi, M. (2004). Shear strength characteristics of sand-mixed with granular rubber. Journal of Geotechnical and Geological Engineering, 22(16), 401–416. doi: 10.1023/B:GEGE.0000025035.74092.6c
   Google Scholar
• Gheibi, E., Sasanakul, I., Sanin, M. V., & Puebla, H. (2016). Effect of temperature on dynamic properties of asphaltic core for earth dam: Geo-Chicago 2016. ASCE, Geo-Special publication.
   Google Scholar
• Hallin, J., & McGhee, K. (2002). NCHRP project 1-37A: Development of the 2002. Guide for the Design of New and Rehabilitated Pavement Structures.
   Google Scholar
• He, Z., Lu, Z., & Zhang, W. (2010). Performance study on rubber powder modified asphalt of waste tire ICCTP. Proceedings of the 10th International Conference of Chinese Transportation Professionals, Beijing, China.
   Google Scholar
• Huang, Y. H. (2004). Pavement analysis and design (2nd ed.). Upper Saddle River, NJ: University of Kentucky.
   Google Scholar
• Humphrey, D. N. (1999). Civil engineering applications of tire shreds. Paper presented at the proceedings of the tire industry conference (p. 16), Hilton Head, South Carolina.
   Google Scholar
• Humphrey, D. N., Sandford, T. C., Cribbs, M. M., & Manion, W. P. (1993). Shear strength and compressibility of tire chips for use as retainingwall backfill. Department of Civil Engineering, University of Maine, 32.
   Google Scholar
• Moo-Young, H., Sellasie, K., Zeroka, D., & Sabnis, G. (2003). Physical and chemical properties of recycled tire shreds for use in construction. Journal of Environmental Engineering, 129(Special Issue: Recycling of waste materials in construction), 921–929. doi: 10.1061/(ASCE)0733-9372(2003)129:10(921)
   Web of Science ®Google Scholar
• Natural Rubber. (2015). Preferred compounding. Retrieved from http://www.preferredperforms.com/rubber/naturalrubbercompounding.aspx
   Google Scholar
• Powell, W. D., & Potter, J. F. (1984). The structural design of bituminous roads (TRRL Report LR 113, 62). London: TRRL.
   Google Scholar
• RMA. (2013). Rubber manufacture association. US scrap tire management summary 2005–2009. Author: Washington, DC.
   Google Scholar
• Soane, D. B., & Van Ouwerkerk, C. (1994). Soil compaction in crop production. New York: Elsevier Science B.V.
   Google Scholar
• Timco Rubber. (2015). Retrieved from http://www.timcorubber.com/rubber-materials/sbr.htm
   Google Scholar
• Tiwari, B., Ajmera, B., Moubayed, S., Lemmon, A., & Styler, K. (2012). Soil modification with shredded rubber tires. GeoCongress on Oakland, California, United States (pp. 3701–3708).
   Google Scholar
• W.S. TYLER test sieves. (2013). Retrieved from http://wstyler.com/particle-analysis/test-sieves
   Google Scholar
• Wu, W. Y., Benda, C. C., & Cauley, R. F. (1997). Triaxial determination of shear strength of tire chips. Journal of Geotechnical and Geoenvironmental Engineering, 123(5), 479–482. doi: 10.1061/(ASCE)1090-0241(1997)123:5(479)
   Web of Science ®Google Scholar
• Xiao-qing, Z., Can-hui, L., & Mei, L. (2009). Rheological property of Bitumen modified by the mixture of the mechanochemically devulcanized tire rubber powder and SBS. Journal of Materials in Civil Engineering, 21(11), 699–705. doi:10.1061/(ASCE)0899-1561(2009)21:11(699).
   Web of Science ®Google Scholar
• Zhang, Z., & Qian, S. (2012). Influence of rubber powder on the mechanical behavior of engineered cementitious composites. In S. Wu, L. Mo, B. Huang, & B. F. Bowers (Eds.), Sustainable construction materials (pp. 215–224). ASCE.
   Google Scholar