References
- American Association of State Highway and Transportation Officials. (2011). Determining the rheological properties of asphalt binder using a dynamic shear rheometer (DSR): T 315-10. Washington, DC.
- Archilla, A. R., & Diaz, L. G. (2011). Effects of asphalt mixture properties on permanent deformation response. Transportation Research Record: Journal of the Transportation Research Board, 2210, 1–8. doi: 10.3141/2210-01
- Asphalt Institute. (2003). Performance graded asphalt binder specification and testing superpave series no.1 (SP-1). Lexington, KY: Author.
- Buss, A., Kuang, Y., Williams, R. C., Bausano, J., Cascione, A., & Schram, S. A. (2014). Influence of warm mix asphalt additive and dosage rate on construction and performance of bituminous pavements. Paper presented at the Transportation Research Board 93rd Annual Meeting, Washington, DC.
- Buss, A., Podolsky, J., Williams, R., & Cochran, E. (2015). Investigation of isosorbide distillation bottoms as a bio-based warm-mix additive. Journal of Materials in Civil Engineering, 28(3), 04015153. doi: 10.1061/(ASCE)MT.1943-5533.0001445
- Buss, A., Rashwan, M., Breakah, T., Williams, R. C., & Kvasnak, A. (2009). Investigation of warm-mix asphalt performance using the mechanistic-empirical pavement design guide. Paper presented at the 2009 Mid-Continent Transportation Research Symposium, Ames, IA.
- Buss, A., & Williams, R. (2012a). Evaluation of warm mix asphalt using the mechanistic-empirical pavement design guide. Paper presented at the Seventh International Conference on Maintenance and Rehabilitation of Pavements and Technological Control, Auckland, New Zealand.
- Buss, A., & Williams, R. C. (2012b). Warm mix asphalt performance modeling using the mechanistic-empirical pavement design guide. In A. Scarpas, N. Kringos, I. Al-Qadi, & A. Loizos (Eds.), 7th RILEM international conference on cracking in pavements (Vol. 4, pp. 1323–1332). Delft, Netherlands: Springer.
- Button, J. W., Estakhri, C., & Wimsatt, A. (2007). A synthesis of warm mix asphalt (Rep. No. FHWA/TX-07/0-5597-1). College Station, TX: Texas Transportation Institute.
- Ceylan, H., Gopalakrishnan, K., & Kim, S. (2008). Advanced approaches to hot-mix asphalt dynamic modulus prediction. Canadian Journal of Civil Engineering, 35(7), 699–707. doi: 10.1139/L08-016
- Ceylan, H., Kim, S., Gopalakrishnan, K., & Ma, D. (2013). Iowa calibration of MEPDG performance prediction models (InTrans Project Reports: Paper 58). Retrieved from http://lib.dr.iastate.edu/intrans_reports/58.
- Christensen, D. W., & Anderson, D. A. (1992). Interpretation of dynamic mechanical test data for paving grade asphalt cements (with discussion). Journal of the Association of Asphalt Paving Technologists, 61, 67–116.
- D’Angelo, J., Harm, E., Bartoszek, J., Baumgardner, G., Corrigan, M., Cowsert, J., … Yeaton, B. (2008). Warm-mix asphalt: European practice Publication FHWA-PL-08-007: FHWA. Washington, DC: U.S. Dept. of Transportation.
- Diefenderfer, S. D. (2010). Analysis of the mechanistic-empirical pavement design guide performance predictions: influence of asphalt material input properties (No. FHWA/VTRC 11-R3). p. 49. Retrieved from http://www.virginiadot.org/vtrc/main/online_reports/pdf/11-r3.pdf.
- El-Basyouny, M. M., & Witczak, M. (2005). Part 2: Flexible pavements: Calibration of alligator fatigue cracking model for 2002 design guide. Transportation Research Record: Journal of the Transportation Research Board, 1919(1), 76–86. doi: 10.3141/1919-09
- Fang, H., Haddock, J. E., White, T. D., & Hand, A. J. (2004). On the characterization of flexible pavement rutting using creep model-based finite element analysis. Finite Elements in Analysis and Design, 41(1), 49–73. doi: 10.1016/j.finel.2004.03.002
- Gandhi, T. (2008). Effects of warm asphalt additives on asphalt binder and mixture properties (Ph.D. dissertation). Clemson Univ., Clemson, SC.
- Goh, S. W., You, Z., & Van Dam, T. J. (2007). Laboratory evaluation and pavement design for warm mix asphalt. Paper presented at the Proceedings of the 2007 Mid-Continent Transportation Research Symposium, Ames, IA.
- Hajj, E., Sebaaly, P., Sathanathan, T., & Shivakolunthar, S. (2013). Impact of antistrip additives on pavement performance using mechanistic-empirical pavement design guide. Journal of Materials in Civil Engineering, 25(3), 308–317. doi: 10.1061/(ASCE)MT.1943-5533.0000582
- Hassan, M. (2009). Life-cycle assessment of warm-mix asphalt: An environmental and economic perspective. Paper presented at the Transportation Research Board 88th Annual Meeting, Washington, DC.
- Hurley, G. C., & Prowell, B. D. (2006). Evaluation of Evotherm for use in warm mix asphalt (Rep. No. 06-02, Vol. 6). Auburn, AL: National Center for Asphalt Technology.
- Jenkins, K., De Groot, J., van de Ven, M., & Molenaar, A. (1999). Half-warm foamed bitumen treatment, a new process. Paper presented at the 7th Conference on Asphalt Pavements for Southern Africa (CAPSA 99), Victoria Falls, Zimbabwe.
- Kim, H., Lee, S., & Amirkhanian, S. (2012). Influence of warm mix additives on PMA mixture properties. Journal of Transportation Engineering, 138(8), 991–997. doi: 10.1061/(ASCE)TE.1943-5436.0000406
- Kim, S., Ceylan, H., & Heitzman, M. (2005). Sensitivity study of design input parameters for two flexible pavement systems using the mechanistic-empirical pavement design guide. Paper presented at the Proceedings of the 2005 Mid-Continent Transportation Research Symposium, Ames, Iowa.
- Kim, S., Ceylan, H., Ma, D., & Gopalakrishnan, K. (2014). Calibration of pavement ME design and mechanistic-empirical pavement design guide performance prediction models for Iowa pavement systems. Journal of Transportation Engineering, 140(10), 04014052. doi: 10.1061/(ASCE)TE.1943-5436.0000704
- Kristjánsdóttir, Ó. (2006). Warm-mix asphalt for cold weather paving (Master’s thesis). Univ. of Washington, Seattle, WA.
- Kristjánsdóttir, Ó, Muench, S. T., Michael, L., & Burke, G. (2007). Assessing potential for warm-mix asphalt technology adoption. Transportation Research Record: Journal of the Transportation Research Board, 2040, 91–99. doi: 10.3141/2040-10
- Larsen, O., Moen, Ø, Robertus, C., & Koenders, B. (2004). WAM Foam asphalt production at lower operating temperatures as an environmental friendly alternative to HMA. Paper presented at the 3rd Eurasphalt & Eurobitume Congress, Vienna, Austria.
- Leng, Z., Gamez, A., & Al-Qadi, I. (2013). Mechanical property characterization of warm-mix asphalt prepared with chemical additives. Journal of Materials in Civil Engineering, 26(2), 304–311. doi: 10.1061/(ASCE)MT.1943-5533.0000810
- Li, J., Pierce, L. M., & Uhlmeyer, J. (2009). Calibration of flexible pavement in mechanistic-empirical pavement design guide for Washington State. Transportation Research Record: Journal of the Transportation Research Board, 2095(1), 73–83. doi: 10.3141/2095-08
- Li, X. J., & Williams, R. C. (2012). A practical dynamic modulus testing protocol. Journal of Testing and Evaluation, 40(1), 100–106.
- National Cooperative Highway Research Program. (2004). Recommended mechanistic-empirical pavement design guide and software: available for evaluation. (No. 290). Washington, DC: Transportation Research Board.
- Park, K., Thomas, N., & Wayne Lee, K. (2007). Applicability of the international roughness index as a predictor of asphalt pavement condition. Journal of Transportation Engineering, 133(12), 706–709. doi: 10.1061/(ASCE)0733-947X(2007)133:12(706)
- Pellinen, T., & Witczak, M. (2002). Stress dependent master curve construction for dynamic (complex) modulus (with discussion). Journal of the Association of Asphalt Paving Technologists, 71, 281–309.
- Perkins, S. W. (2009). Synthesis of warm mix asphalt paving strategies for use in Montana highway construction (Rep. No. FHWA/MT-09-009/8117-38). Helena, MT: Western Transportation Institute.
- Podolsky, J. H. (2014). Investigation of bio-derived material and chemical technologies as sustainable warm mix asphalt additives (PhD). Iowa State University, Ames.
- Podolsky, J. H., Buss, A., Williams, R. C., & Cochran, E. W. (2015). Investigation of performance tests using bio-derived/chemical additives. Paper presented at the 1st International Conference on Bio-based Building Materials, Clermont-Ferrand, France.
- Podolsky, J. H., & Williams, R. C. (2014). Estimation and assessment of high temperature mix performance grade for select bio-based WMA additives. Construction and Building Materials, 69(0), 310–322. doi: 10.1016/j.conbuildmat.2014.07.046
- Prowell, B. D., Hurley, G. C., & Crews, E. (2007). Field performance of warm-mix asphalt at the NCAT test track. Paper presented at the Transportation Research Board 86th Annual Meeting, Washington, DC.
- Robinette, C., & Williams, R. C. (2006). The effects of the testing history and preparation method on the superpave simple performance test (with discussion). Journal of the Association of Asphalt Paving Technologists, 75, 297–320.
- Schwartz, C., Li, R., Ceylan, H., Kim, S., & Gopalakrishnan, K. (2013). Global sensitivity analysis of mechanistic-empirical performance predictions for flexible pavements. Transportation Research Record: Journal of the Transportation Research Board, 2368, 12–23. doi: 10.3141/2368-02
- Von Quintus, H. L., Mallela, J., Bonaquist, R., Schwartz, C. W., & Carvalho, R. L. (2012). NCHRP Rep. 719: Calibration of rutting models for structural and mix design. Washington, DC: Transportation Research Board of the National Academies.
- Werpy, T. A., Holladay, J. E., & White, J. F. (2004). Top value added chemicals from biomass: I. Results of screening for potential candidates from sugars and synthesis gas (pp. Medium: ED; Size: PDFN).
- Witczak, M., Von Quintus, H., & Schwartz, C. (1997). Superpave support and performance models management: Evaluation of the SHRP performance models system. Paper presented at the Eighth International Conference on Asphalt Pavements, Seattle, WA.
- Yang, X., You, Z., Dai, Q., & Mills-Beale, J. (2014). Mechanical performance of asphalt mixtures modified by bio-oils derived from waste wood resources. Construction and Building Materials, 51, 424–431. doi: 10.1016/j.conbuildmat.2013.11.017