Effect of filler gradation on creep response of asphalt mix

References

• AASHTO M17. (2011). Standard specifications for mineral filler for bituminous paving mixtures. Washington, DC: AASHTO Provisional standards.
   Google Scholar
• AASHTO T322. (2011). Standard method of test for determination the creep compliance and strength of hot mix asphalt (HMA) using the indirect tensile test device. Washington, DC: AASHTO Provisional standards.
   Google Scholar
• Anderson, D. A. (1996). Influence of fines on performance of asphalt concrete mixes. Proceedings of 4th annual symposium, International Center for Aggregates Research, Atlanta, 1–12.
   Google Scholar
• Anderson, D. A., Bahia, H. U., & Dongre, R. (1992). Rheological properties of mineral filler-asphalt mastics and their relationship to pavement performance. In C. M. Richard (Eds.), Effects of aggregates and mineral fillers on asphalt mixture performance: ASTM STP 1147 (pp. 131–153). Philadelphia: American Society for Testing and Materials.
   Google Scholar
• ASTM C204. (2011). Standard test methods for fineness of hydraulic cement by air-permeability apparatus. West Conshohocken: ASTM.
   Google Scholar
• ASTM D 113. (2007). Standard test method for ductility of bituminous materials. West Conshohocken: ASTM.
   Google Scholar
• ASTM D242. (2009). Standard specification for mineral filler for bituminous paving mixtures. West Conshohocken: ASTM.
   Google Scholar
• ASTM D854. (2010). Standard test methods for specific gravity of soil solids by water pycnometer. West Conshohocken: ASTM.
   Google Scholar
• ASTM D2171. (2010). Standard test method for viscosity of asphalts by vacuum capillary viscometer. West Conshohocken: ASTM.
   Google Scholar
• ASTM D 6926. (2010). Standard practice for preparation of bituminous specimens using Marshall apparatus. West Conshohocken: ASTM.
   Google Scholar
• ASTM D6931. (2012). Standard test method for indirect tensile (IDT) strength of bituminous mixtures. West Conshohocken: ASTM.
   Google Scholar
• Brice, D., Herve, D. B., Piere, C., & Gilles, G. (2007). Linear viscoelastic properties of bituminous materials: From binders to mastics. Journal of the Association of Asphalt Paving Technologists, 76, 455–494.
   Google Scholar
• Chen, J. S., & Peng, C. H. (1998). Analyses of tensile failure properties of asphalt mineral filler mastics. Journal of Materials in Civil Engineering, 10(4), 256–262.
   Web of Science ®Google Scholar
• Chen, M., Lin, J., Wu, S., & Liu, C. (2011). Utilization of recycled brick powder as alternative filler in asphalt mixture. Construction and Building Material, 25, 1532–1536.
   Web of Science ®Google Scholar
• EN 13242: 2002 +A1:2007. (2002). Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction. Brussels: European committee for standardization.
   Google Scholar
• Epps, A. L., Hand, A. J., Epps, J. A., & Sebaaly, P. E. (2001). Aggregate contributions to the performance of hot mix asphalt at WesTrack. In T. D. White, S. R. Johnson, & J. J. Yzenas (Eds.), Aggregate contribution to hot mix asphalt (HMA) performance (pp. 30–43). West conshohocken (PA): ASTM STP 1412, ASTM.
   Google Scholar
• Horak, E., & Emery, S. J. A. (2010). Case study: Forensic investigation to determine the reasons for premature failure in an asphalt surface layer. International Journal of Pavement Engineering, 11(4), 511–527.
   Google Scholar
• Huang, B., Dong, Q., & Burdette, E. G. (2009). Laboratory evaluation of incorporating waste ceramic materials into Portland cement and asphaltic concrete. Construction and Building Material, 23(12), 3451–3456.
   Web of Science ®Google Scholar
• Huang, B., Shu, X., & Chen, X. (2007). Effects of mineral fillers on hot-mix asphalt laboratory-measured properties. International Journal of Pavement Engineering, 8(1), 1–9.
   Google Scholar
• IS 1203. (2004). Determination of penetration. New Delhi: Bureau of Indian Standard.
   Google Scholar
• IS 1205. (2004). Determination of softening point. New Delhi: Bureau of Indian Standard.
   Google Scholar
• IS 2386 -Part I. (2002). Methods of test for aggregates for concrete. New Delhi: Bureau of Indian Standard.
   Google Scholar
• IS 2386 -Part IV. (2002). Methods of test for aggregates for concrete. New Delhi: Bureau of Indian Standard.
   Google Scholar
• Ishai, I., & Craus, J. (1996). Effects of some aggregate and filler characteristics on behavior and durability of asphalt paving mixtures. Transportation Research Record, 1530, 75–85.
   Google Scholar
• Jayaprakasan, S. (2012). A study on influence of some fillers in bituminous mixes (Master’s thesis). Indian Institute of Technology Kanpur, Kanpur.
   Google Scholar
• Kandhal, P. S. (1981). Evaluation of baghouse fines in bituminous paving mixtures. Proceeding of Association of Asphalt Paving Technology, 50, 150–203.
   Google Scholar
• Kandhal, P. S., Lynn, C. Y., & Parker, F. (1998). Characterization tests for mineral fillers related to performance of asphalt paving mixtures (NCAT Report No. 98-2). Retrieved September 16, 2015, from Ntl.bts.gov//lib/7000/7941/rep98-2.pdf.
   Google Scholar
• Kavussi, A., & Hicks, R. G. (1997). Properties of bituminous mixtures containing different fillers. Proceeding of Association of Asphalt Paving Technology, 66, 153–186.
   Google Scholar
• Kim, Y. R., Kim, N., & Khosla, N. P. (1992). Effects of aggregate type and gradation on fatigue and permanent deformation of asphalt concrete. In R. C. Meininger (Eds.), Effects of aggregate and mineral fillers on asphalt mixture performance (pp. 310–328). Philadelphia: ASTM STP 1147, ASTM.
   Google Scholar
• Kim, Y. R., & Little, D. N. (2004). Linear viscoelastic analysis of asphalt mastics. Journal of Materials in Civil Engineering, 16(2), 122–132.
   Web of Science ®Google Scholar
• Kuity, A., Jayaprakashan, S., & Das, A. (2014). Laboratory investigation on volume proportioning scheme of mineral fillers in asphalt mix. Construction and Building Material, 68, 637–643.
   Web of Science ®Google Scholar
• Lackner, R., Spiegl, M., Blab, R., & Eberhardsteiner, J. (2005). Is low-temperature creep of asphalt mastic independent of filler shape and mineralogy?-Arguments from multiscale analysis. Journal of Materials in Civil Engineering, 17(5), 485–491.
   Web of Science ®Google Scholar
• Matthews, J. M., & Monismith, C. L. (1992). The effect of aggregate gradation on the creep response of asphalt mixtures and pavement rutting estimates. In R. C. Meininger (Eds.), Effects of aggregate and mineral fillers on asphalt mixture performance (pp. 329–347). Philadelphia: ASTM STP 1147, ASTM.
   Google Scholar
• Ministry of Road Transport and Highway. (2013). Specifications for road and bridge works. New Delhi: Indian Roads Congress.
   Google Scholar
• Ministry of Transportation of Ontario. (2001). Method of test for volume of voids (Rigden voids) in compacted filler or fines. Laboratory test manual, test method LS-628, revs no. 23, 1–7.
   Google Scholar
• Mohammad, L. N., Abadie, C., Gokmen, R., & Puppala, A. J. (2007). Mechanistic evaluation of hydrated lime in hot-mix asphalt mixtures. Transportation Research Record, 1723, 26–36.
   Google Scholar
• Nan, S., & Chen, J. S. (2002). Engineering properties of asphalt concrete made with recycled glass. Resources, Conservation and Recycling, 35(4), 259–274.
   Web of Science ®Google Scholar
• NCHRP 673. (2011). A manual for design of hot mix asphalt with commentary (National Cooperative Highway Research Program Report No. 673). 1–273. Retrieved September 16, 2015, from Onlinepubs.trb.org/onlinepubs/nchrp/nchrp_rpt_673.pdf
   Google Scholar
• Serkan, T. (2008). Mechanical evaluation of asphalt-aggregate mixtures prepared with fly ash as filler replacement. Canadian Journal of Civil Engineering, 35(1), 27–40.
   Web of Science ®Google Scholar
• Smith, B. J., & Hesp, S. (2000). Crack pinning in asphalt mastic and concrete: effect of rest periods and polymer modifiers on the fatigue life. Proceedings of 2nd Eurasphalt and Eurobitumen Congress, Book II, Barcelona, 539–546.
   Google Scholar
• Tayebali, A. A., Malpass, G. A., & Khosla, N. P. (1998). Effect of mineral filler type and amount on design and performance of asphalt concrete mixtures. Transportation Research Record, 1609, 36–43.
   Google Scholar
• Wang, H., Al-Qadi, I. L., Faheem, A. F., Bahia, H. U., Yang, S. H., & Reinke, G. H. (2011). Effect of mineral filler characteristics on asphalt mastic and mixture rutting potential. Journal of the Transportation Research Board, 2208, 33–39.
   Web of Science ®Google Scholar
• Zulkati, A., Diew, W. Y., & Delai, D. S. (2012). Effects of fillers on properties of asphalt concrete mixture. Journal of Transportation Engineering, 138(7), 902–910.
   Web of Science ®Google Scholar