432
Views
21
CrossRef citations to date
0
Altmetric
Original Articles

Degradation of hot mix asphalt samples subjected to freeze-thaw cycles and partially saturated with water or brine

, &
Pages 849-864 | Received 14 Dec 2015, Accepted 08 Oct 2016, Published online: 09 Feb 2017

References

  • Di Benedetto, H., Nguyen, Q. T., & Sauzéat, C. (2011). Nonlinearity, heating, fatigue and thixotropy during cyclic loading of asphalt mixtures. Road Materials and Pavement Design, 12(1), 129–158. doi: 10.1080/14680629.2011.9690356
  • Di Benedetto, H., Olard, F., Sauzéat, C., & Delaporte, B. (2004). Linear viscoelastic behaviour of bituminous materials: From binders to mixes. Road Materials and Pavement Design, 5(Suppl. 1), 163–202. doi: 10.1080/14680629.2004.9689992
  • Fortin, G. (2010). Variabilité et fréquence des cycles de gel-dégel dans la région de Québec, 1977–2006. Le Géographe Canadien, 54(2), 196–208. [In French]. doi: 10.1111/j.1541-0064.2009.00291.x
  • Gayte, P., Di Benedetto, H., Sauzéat, C., & Nguyen, Q. T. (2016). Influence of transient effects for analysis of complex modulus tests on bituminous mixtures. Road Materials and Pavement Design, 17, 271–289. doi:doi: 10.1080/14680629.2015.1067246
  • Lamothe, S. (2014). Endommagement d'un enrobé bitumineux partiellement saturé en eau ou en saumure soumis à des sollicitations cycliques de gel-dégel et mécaniques (PhD thesis). École de technologie supérieure and École des travaux publics de l’État, 467 p. [In French].
  • Lamothe, S., Perraton, D., & Di Benedetto, H. (2015). Contraction and expansion of partially saturated hot mix asphalt samples exposed to freeze-thaw cycles. Road Materials and Pavement Design, 16(2), 277–299. doi: 10.1080/14680629.2014.990917
  • Lamothe, S., Perraton, D., & Di Benedetto, H. (2016). Deterioration of HMA partially saturated with water or brine subjected to freeze-thaw cycles. In Proceedings of the 8th RILEM international symposium on testing and characterization of sustainable and innovative bituminous materials (pp. 705–717). Ancona: Springer.
  • LC 26-001. (1997). Tenue à l’eau (par trempage). Recueil des méthodes d’essai LC, Laboratoire des chausses (LC), Ministère des Transports du Québec (MTQ), Les Publications du Québec, 4 p. [In French].
  • LC 26-040. (2007). Détermination de la densité brute et de la masse volumique des enrobés à chaud compactés. Recueil des méthodes d’essai LC, Laboratoire des chausses (LC), Ministère des Transports du Québec (MTQ), Les Publications du Québec, 8 p. [In French].
  • LC 4201. (2007). Enrobés à chaud formulés selon le principe de la méthode Marshall. Norme 4201, Tome VII, Liants et enrobés bitumineux, Enrobés à chaud, Ministère des Transports du Québec (MTQ), 12 p. [In French].
  • LC 26-045. (2008). Détermination de la densité maximale. Recueil des méthodes d’essai LC, Laboratoire des chausses (LC), Ministère des Transports du Québec (MTQ), Les Publications du Québec, 20 p. [In French].
  • LC 26-400. (2008). Fabrication d’éprouvettes au compacteur LCPC. Recueil des méthodes d’essai LC, Laboratoire des chausses (LC), Ministère des Transports du Québec (MTQ), Les Publications du Québec, 12 p. [In French].
  • Lu, Q., & Harvey, J. T. (2005). Investigation of conditions for moisture damage in asphalt concrete and appropriate laboratory test methods (Research report UCPRC-RR-2005-15). University of California, Pavement Research Center, 333 p.
  • Mangiafico, S., Sauzéat, C., Di Benedetto, H., Pouget, S., Olard, F., & Planque, L. (2015). Quantification of biasing effects during fatigue tests on asphalt mixes: Non-linearity, self-heating and thixotropy. Road Materials and Pavement Design, 16(Suppl. 2), 73–99. doi:doi: 10.1080/14680629.2015.1077000
  • Mounier, D., Di Benedetto, H., & Sauzéat, C. (2012). Determination of bituminous mixtures linear properties using ultrasonic wave propagation. Construction and Building Materials, 36, 638–647. doi: 10.1016/j.conbuildmat.2012.04.136
  • MTQ. (2003, November). Impact des restrictions de charges en période de dégel. Ministère des Transports du Québec (MTQ), Info DLC, 8(11), 2 p. [In French].
  • Nguyen, Q. T., Di Benedetto, H., & Sauzéat, C. (2012). Determination of thermal properties of asphalt mixtures as another output from cyclic tension-compression test. Road Materials and Pavement Design, 13(1), 85–103. doi: 10.1080/14680629.2011.644082
  • Olard, F., & Di Benedetto, H. (2003). General “2S2P1D” model and relation between the linear viscoelastic behaviours of bituminous binders and mixes. Road Materials and Pavement Design, 4(2), 185–224.
  • Perraton, D., Di Benedetto, H., Sauzéat, C., Hofko, B., Graziani, A., Nguyen, Q.-T., … Grenfell, J. (2016). 3Dim experimental investigation of linear viscoelastic properties of bituminous mixtures. Materials and Structures Journal, 49, 4813–4829. doi:doi: 10.1617/s11527-016-0827-3
  • Pham, N. H., Sauzéat, C., Di Benedetto, H., Gonzalez-Leon, J. A., Barreto, G., Nicolai, A., … Jakubowski, M. (2015). Reclaimed asphalt pavement and additives influence on 3D linear behaviour of warm mix asphalts. Road Materials and Pavement Design, 16(3), 569–591. doi:doi: 10.1080/14680629.2015.1021108
  • Pouget, S., Sauzéat, C., Di Benedetto, H., & Olard, F. (2010). From the behaviour of constituent materials to the calculation and design of orthotropic steel bridge structures. Road Materials and Pavement Design, 11, 111–144. doi: 10.1080/14680629.2010.9690329
  • Pouget, S., Sauzéat, C., Di Benedetto, H., & Olard, F. (2012). Modeling of viscous bituminous wearing course materials on orthotropic steel deck. Materials and Structures, 45, 1115–1125. doi: 10.1617/s11527-011-9820-z
  • St-Laurent, D., & Roy, M. (1995). Évaluation structurale de chaussées souples dans un contexte climatique nordique (Rapport GCS-95-05). Université Laval, Québec, 238 p. [In French].
  • Tremblay, M. (2006, September). Étude de la fréquence des événements météorologiques précurseurs des nids-depoule: le Québec un cas particulier? Retrieved from http://ptaff.ca/routes_du_quebec/, Consulted December 2010. [In French].

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.