References
- AASHTO T 312. (2012). Standard method of test for preparing and determining the density of asphalt mixture specimens by means of the superpave gyratory compactor. Standard by American Association of State Highway Transportation Officials.
- AASHTO T 342. (2011). Standard method of test for determining dynamic modulus of hot-mix asphalt concrete mixtures. Standard by American Association of State Highway Transportation Officials.
- AASHTO. (2008). Mechanistic-Empirical pavement design guide – A manual of practice (Interim Edition). Washington, DC: American Association of State Highway and Transportation Officials.
- Ahmed, M., Rahman, A. S. M. A., Islam, M. R., & Tarefder, R. A. (2015). Combined effect of asphalt concrete cross-anisotropy and temperature variation on pavement stress–strain under dynamic loading. Construction and Building Materials, 93, 685–694. doi: 10.1016/j.conbuildmat.2015.06.031
- ASTM. (1998). Viscosity-temperature chart for asphalts: ASTM D 2493. Annual Book of ASTM Standards, 0.403, 230–234.
- Birgisson, B., Sholar, G., & Roque, R. (2005). Evaluation of predicted dynamic modulus for Florida mixtures. 84th Annual meeting of the transportation research board, Paper No. 05-1309, Washington, DC.
- Booij, H. C., & Thoone, G. P. J. M. (1982). Generalization of Kramers–Kronig transforms and some approximations of relations between viscoelastic quantities. Rheologica Acta, 21(1), 15–24. doi: 10.1007/BF01520701
- Christensen, D. W., Pellinen, T. K., & Bonaquist, R. F. (2003). Hirsch model for estimating the modulus of asphalt concrete. Journal of Association Asphalt Paving Technologists, 72, 97–121.
- Clyne, T. R., Li, X., Marasteanu, M. O., and Skok, E. L. (2003). Dynamic and resilient modulus of Mn/DOT asphalt mixtures (Report No. MN/ RC-2003-09). St. Paul, MN: Minnesota Department of Transportation.
- Dongré, R., Myers, L., D’Angelo, J., Paugh, C., & Gudimettla, J. (2005). Field evaluation of Witczak and Hirsch models for predicting dynamic modulus of hot-mix asphalt. Journal of the Association of Asphalt Paving Technologists, 74, 381–442.
- Kim, Y.R., King, M., and Momen, M. (2005). Typical dynamic moduli values of hot mix asphalt in North Carolina and their prediction. 84th Annual meeting of the transportation research board, Paper No. 05-2568, Washington, DC.
- Mohammad, L. N., Wu, Z., Myers, L., Cooper, S., & Abadie, C. (2005). A practical look at simple performance tests: Louisiana’s experience. Journal of the Association of Asphalt Paving Technologists, 74, 557–600.
- NCHRP 1-37A. (2004). Guide for mechanistic-empirical design of new-rehabilitated pavement structures (Report 1-37A). Washington, DC: National Cooperative Highway Research Program (NCHRP).
- Schwartz, C. W. (2005). Evaluation of the Witczak dynamic modulus prediction model. 84th Annual meeting of the transportation research board, Paper No. 05-2112, Washington D.C.
- Tran, N. H., & Hall, K. D. (2005). Evaluating the predictive equation in determining dynamic moduli of typical asphalt mixtures used in Arkansas. Journal of the Association of Asphalt Paving Technologists, 74, 1–17.
- Weldegiorgis, M. (2014). On dynamic modulus of asphalt concrete for moisture damage (Doctoral Dissertation). Albuquerque, NM: University of New Mexico.
- Yang, X., & You, Z. (2015). New predictive equations for dynamic modulus and phase angle using a nonlinear least-squares regression model. Journal of Materials in Civil Engineering, 27(3), 04014131. doi: 10.1061/(ASCE)MT.1943-5533.0001070