Comparison of laboratory performance of two superpave binders mixed with two modifiers

References

• Airey, G. D. (2002a). Use of black diagrams to identify inconsistencies in rheological data. Road Materials and Pavement Design, 3(4), 403–424. doi: 10.1080/14680629.2002.9689933
   Google Scholar
• Airey, G. D. (2002b). Rheological evaluation of ethylene vinyl acetate polymer modified bitumens. Construction and Building Materials, 16, 473–487. doi: 10.1016/S0950-0618(02)00103-4
   Web of Science ®Google Scholar
• Al-Abdlwahab, A., Farahat Ali, M., Al-Dubabe, I. A., & Asi, I. M. (1996). Adaptation of SHRP performance-based asphalt specification to the Gulf countries, Final Report, King Abdul Aziz City for Science and Technology (KACST).
   Google Scholar
• Alhamali, D. I., Wu, J., Liu, Q., Hassan, N. A., Yusoff, N. I. M., & Ali, S. I. A. (2016). Physical and rheological characteristics of polymer modified bitumen with Nanosilica particles. Arabian Journal for Science and Engineering, 41(4), 1521–1530. doi: 10.1007/s13369-015-1964-7
   Web of Science ®Google Scholar
• Asifur, S. M., Rahman, M., Islam, R., & Tarefder, R. A. (2018). Dynamic modulus and phase angle models for New Mexico’s Superpave mixtures. Road Materials and Pavement Design. Advance online publication. doi: 10.1080/14680629.2017.1422002
   Web of Science ®Google Scholar
• Ba-Abbad, M. M., Chai, P. V., Takriff, M. S., Benamor, A., & Mohammad, A. W. (2015). Optimization of nickel oxide nanoparticle synthesis through the sol–gel method using Box–Behnken design. Materials & Design, 86, 948–956. doi: 10.1016/j.matdes.2015.07.176
   Web of Science ®Google Scholar
• Ba-Abbad, M. M., Kadhum, A. A. H., Mohamad, A. B., Takriff, M. S., & Sopian, K. (2010). Solar photocatalytic degradation of environmental pollutants using ZnO prepared by sol–gel: 2,4-Dichlorophenol as case study. International Journal of Thermal & Environmental Engineering, 1(1), 37–42. doi: 10.5383/ijtee.01.01.006
   Google Scholar
• Baaj, H. (2002). Behavior of granular materials treated with hydrocarbon binders. Mechanical, Energetic, Acoustic and Civil Engineering. PhD ENTPE-INSA Lyon, p.247.
   Google Scholar
• Benedetto, D. H., Nguyen, Q. T., & Sauzéat, C. (2011). Nonlinearity, heating, fatigue and thixotropy during cyclic loading of asphalt mixtures. Road Materials and Pavement Design, 12(1), 129–158. doi: 10.1080/14680629.2011.9690356
   Web of Science ®Google Scholar
• Bernier, A., Zofka, A., & Yut, I. (2012). Laboratory evaluation of rutting susceptibility of polymer-modified asphalt mixtures containing recycled pavements. Construction and Building Materials, 31, 58–66. doi: 10.1016/j.conbuildmat.2011.12.094
   Web of Science ®Google Scholar
• Biligiri, K. P., Kaloush, K., & Uzan, J. (2010). Evaluation of asphalt mixtures viscoelastic properties using phase angle relationships. International Journal of Pavement Engineering, 11(2), 143–152. doi: 10.1080/10298430903033354
   Web of Science ®Google Scholar
• Chelovian, A., & Shafabakhsh, G. (2017). Laboratory evaluation of nano Al2O3 effect on dynamic performance of stone mastic asphalt. International Journal of Pavement Research and Technology, 10(2), 131–138. doi: 10.1016/j.ijprt.2016.11.004
   Google Scholar
• Chen, S. J., & Zhang, X. N. (2012). Mechanics and pavement properties research of nanomaterial modified asphalt. Advanced Engineering Forum, 5, 259–264. doi: 10.4028/www.scientific.net/AEF.5.259
   Google Scholar
• Fang, C., Yu, R., Liu, S., & Li, Y. (2013). Nanomaterials applied in asphalt modification: A review. Journal of Materials Science & Technology, 29(7), 589–594. doi: 10.1016/j.jmst.2013.04.008
   Web of Science ®Google Scholar
• Fink, J. K. (2010). Handbook of engineering and specialty thermoplastics, volume 1: Polyolefins and styrenics (1st ed.). Salem, MA: Scrivener.
   Google Scholar
• Fu, H., Xie, L., Dou, D., Li, L., Yu, M., & Yao, S. (2007). Storage stability and compatibility of asphalt binder modified by SBS graft copolymer. Construction and Building Materials, 21(7), 1528–1533. doi: 10.1016/j.conbuildmat.2006.03.008
   Web of Science ®Google Scholar
• Ghabchi, R., Barman, M., Singh, D., Zaman, M., & Mubaraki, M. (2016). Comparison of laboratory performance of asphalt mixes containing different proportions of RAS and RAP. Construction and Building Materials, 138, 343–351. doi: 10.1016/j.conbuildmat.2016.07.029
   Google Scholar
• Glaoui, B., Merbouh, M. H., Van De Ven, M., Chailleux, E., & Youcefi, A. (2013). How thermal fatigue cycles change the rheological behavior of polymer modified bitumen? Energy Procedia, 36, 844–851. doi: 10.1016/j.egypro.2013.07.097
   Google Scholar
• Habib, N. Z., Kamaruddin, I., Napiah, M., & Isa, M. T. (2011). Effect of thermoplastic copolymers on microstructure and viscoelastic behavior of bitumen. Proceedings of Malaysian Universities Transportation Research Forum and Conferences, Penang, Malaysia.
   Google Scholar
• Liphardt, A., Król, J., & Radziszewski, P. (2016). Influence of polymer modified binder content from Rap on stone mastic asphalt rutting resistance. Procedia Engineering, 143, 407–413. doi: 10.1016/j.proeng.2016.08.142
   Google Scholar
• Liu, X., Wu, S., Liu, G., & Li, L. (2015). Effect of ultraviolet aging on rheology and chemistry of LDH modified bitumen. Materials, 8(8), 5238–5249. doi: 10.3390/ma8085238
   PubMed Web of Science ®Google Scholar
• Lotfi-Eghilm, A., & Karimi, M. S. (2016). Fatigue behavior of hot mix modified with nano Al2O3- An experimental study. Advances in Science and Technology, 10(3), 58–63.
   Google Scholar
• Maity, S. K., Kumar, S., Srivastava, M., Kharola, A. S., Maurya, K. K., Konathala, S., & Garg, M. O. (2014). Characterization of asphaltenic material obtained by treating of vacuum residue with different reactive molecules. Fuel, 149, 8–14. doi: 10.1016/j.fuel.2014.11.002
   Web of Science ®Google Scholar
• Mangiafico, S., Sauzéat, C., Di Benedetto, H., Pouget, S., Olard, F., & Planque, L. (2015). Quantification of biasing effects during fatigue tests on asphalt mixes: Non-linearity, self-heating and thixotropy. Road Materials and Pavement Design, 16(2), 73–99. doi: 10.1080/14680629.2015.1077000
   Google Scholar
• McGennis, R. B., Shuler, S., & Bahia, H. U. (1994). Background of superpave asphalt binder test methods. Federal Highway Administration, Office of Technology Applications.
   Google Scholar
• Memon, N. A., Pathan, A. A., Pathan, A. F. H., Yusoff, I., & Mubaraki, M. (2016). Investigation of Hot storage stability of CRMB using X-Ray computed tomography. International Journal of Engineering and Technology, 8(3), 1489–1500.
   Google Scholar
• Ministry of Transport. (2006). MOT Hot Asphalt Mix Design System, sing Superpave System Detailed in Asphalt Institute SP-2 and the AASHTO 2005 Standards. Ministry of Transport (MOT), General Directorate for Materials and Research, Saudi Arabia.
   Google Scholar
• Mubaraki, M. (2012). Toughness enhancement of airfield concrete pavement by using short fiber. International Journal of Pavement Research and Technology, 5(4), 225–233.
   Google Scholar
• Mubaraki, M. (2015). Toughness enhancement of airfield concrete pavement by using short fiber. Journal of Marine Science and Technology, 23(3), 373–379.
   Web of Science ®Google Scholar
• Mubaraki, M., Abd-Elhady, A. A., & Sallam, H. (2013). Mixed mode fracture toughness of recycled tire rubber-filled concrete for airfield rigid pavements. International Journal of Pavement Research and Technology, 6(1), 8–14.
   Google Scholar
• Nanomaterial. 2018. Data and knowledge on Nanomaterials. https://nanopartikel.info/en.
   Google Scholar
• SABIC. 2018. Our Quality Standards. https://www.sabic.com/en/products/polymers.
   Google Scholar
• Shiman, L., Shiman, A., Spitsyna, N., & Lobach, A. (2011). Effects of Nanocomposites on the High Temperature Rheological Properties of Asphalt-Binder. Proc. GeoHunan 2011 Int. Conf, hlm, Hunan, China.
   Google Scholar
• Soos, Z., Gebr, R., Gazvolgi, Z. I., & Udvard, B. (2017). Utilization of aluminium dross as asphalt filler. Journal of Silicate Based and Composite Materials, 69(3), 89–93.
   Web of Science ®Google Scholar
• Xiao, F., Amirkhanian, S., Wang, H., & Hao, P. (2014). Rheological property investigations for polymer and polyphosphoric acid modified asphalt binders at high temperatures. Construction and Building Materials, 64, 316–323. doi: 10.1016/j.conbuildmat.2014.04.082
   Web of Science ®Google Scholar
• Yang, X., & You, Z. (2015). High temperature performance evaluation of bio-oil modified asphalt binders using the DSR and MSCR tests. Construction and Building Materials, 76, 380–387. doi: 10.1016/j.conbuildmat.2014.11.063
   Web of Science ®Google Scholar
• Yao, H., You, Z., Li, L., Lee, C. H., Wingard, D., Yap, Y. K., … Goh, S. W. (2012). Rheological properties and chemical bonding of asphalt modified with nanosilica. Journal of Materials in Civil Engineering, 25(11), 1619–1630. doi: 10.1061/(ASCE)MT.1943-5533.0000690
   Web of Science ®Google Scholar
• Yao, H., You, Z., Li, L., Shi, X., Goh, S. W., Mills-Beale, J., & Wingard, D. (2012). Performance of asphalt binder blended with Non-modified and polymer-modified nanoclay. Construction and Building Materials, 35, 159–170. doi: 10.1016/j.conbuildmat.2012.02.056
   Web of Science ®Google Scholar
• Zare-Shahabadi, A., Shokuhfar, A., & Ebrahimi-Nejad, S. (2010). Preparation and rheological characterization of asphalt binders reinforced with layered silicate nanoparticles. Construction and Building Materials, 24(7), 1239–1244. doi: 10.1016/j.conbuildmat.2009.12.013
   Web of Science ®Google Scholar
• Zhang, F., Yu, J., & Han, J. (2011). Effects of thermal oxidative ageing on dynamic viscosity, TG/DTG, DTA and FTIR of SBS-and SBS/sulfur-modified asphalts. Construction and Building Materials, 25(1), 129–137. doi: 10.1016/j.conbuildmat.2010.06.048
   Web of Science ®Google Scholar