References
- AASHTO. (2003). Standard method of test for resistance of compacted hot mix asphalt (HMA) to moisture-induced damage. AASHTO T283. Washington, DC: American Association of State Highway and Transportation Officials.
- Addepally, U., & Thulluri, C. (2015). Recent progress in production of fuel range liquid hydrocarbons from biomass-derived furanics via strategic catalytic routes. Fuel, 159, 935–942. doi: https://doi.org/10.1016/j.fuel.2015.07.036
- Airey, G. (2003). Rheological properties of styrene butadiene styrene polymer modified road bitumens?. Fuel, 82(14), 1709–1719. doi: https://doi.org/10.1016/S0016-2361(03)00146-7
- ASTM. (2009). Standard test method for separation of asphalt into four fractions. ASTM D4124. West Conshohocken, PA: ASTM International.
- ASTM. (2013). Standard test method for penetration of bituminous materials. ASTM D5. West Conshohocken, PA: ASTM International.
- ASTM. (2014). Standard test method for softening point of bitumen (ring-and-ball apparatus). ASTM D36. West Conshohocken, PA: ASTM International.
- ASTM. (2015). Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. ASTM D4402. West Conshohocken, PA: ASTM International.
- ASTM. (2017). Standard test method for ductility of asphalt materials. ASTM D113. West Conshohocken, PA: ASTM International.
- Buss, A., Podolsky, J., Williams, R. C., & Cochran, E. (2016). Investigation of isosorbide distillation bottoms as a bio-based warm-mix additive. Journal of Materials in Civil Engineering, 28(3), 04015153. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0001445
- Chen, M., Leng, B., Wu, S., & Sang, Y. (2014). Physical, chemical and rheological properties of waste edible vegetable oil rejuvenated asphalt binders. Construction and Building Materials, 66, 286–298. doi: https://doi.org/10.1016/j.conbuildmat.2014.05.033
- Dhasmana, H., Ozer, H., Al-Qadi, I. L., Zhang, Y., Schideman, L., Sharma, B. K., … Zhang, P. (2015). Rheological and chemical characterization of biobinders from different biomass resources. Transportation Research Record: Journal of the Transportation Research Board, 2505, 121–129. doi: https://doi.org/10.3141/2505-16
- Dong, Z., Zhou, T., Wang, H., & Luan, H. (2018). Performance comparison between different sourced Bioasphalts and asphalt mixtures. Journal of Materials in Civil Engineering, 30(5), 04018063. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0002247
- Fini, E. H., Kalberer, E. W., Shahbazi, A., Basti, M., You, Z., Ozer, H., & Aurangzeb, Q. (2011). Chemical characterization of biobinder from swine manure: Sustainable modifier for asphalt binder. Journal of Materials in Civil Engineering, 23(11), 1506–1513. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000237
- Goyal, H. B., Seal, D., & Saxena, R. C. (2008). Bio-fuels from thermochemical conversion of renewable resources: A review. Renewable and Sustainable Energy Reviews, 12(2), 504–517. doi: https://doi.org/10.1016/j.rser.2006.07.014
- Hill, B., Oldham, D., Behnia, B., Fini, E. H., Buttlar, W. G., & Reis, H. (2018). Evaluation of low temperature viscoelastic properties and fracture behavior of bio-asphalt mixtures. International Journal of Pavement Engineering, 19(4), 362–369. doi: https://doi.org/10.1080/10298436.2016.1175563
- Jalkh, R., Abiad, M., & Chehab, G. R. (2016). Rejuvenators for asphalt binders using oil extracted from spent coffee grounds. In A. Farid, A. De, K. R. Reddy, N. Yesiller, & D. Zekkos (Eds.), Geo-Chicago 2016: Geotechnics for sustainable energy (pp. 666–676). Reston, VA: American Society of Civil Engineers.
- Król, J. B., Kowalski, K. J., Niczke, Ł, & Radziszewski, P. (2016). Effect of bitumen fluxing using a bio-origin additive. Construction and Building Materials, 114, 194–203. doi: https://doi.org/10.1016/j.conbuildmat.2016.03.086
- Li, Y., Moraes, R., Lyngdal, E., & Bahia, H. (2016). Effect of polymer and oil modification on the aging susceptibility of asphalt binders. Transportation Research Record: Journal of the Transportation Research Board, 2574, 28–37. doi: https://doi.org/10.3141/2574-03
- Ministry of Transport of the People’s Republic of China. (2004). Technical specifications for construction of highway asphalt pavements. JTG F40-2004. Beijing: China Communications Press.
- Ministry of Transport of the People’s Republic of China. (2011). Standard test methods of bitumen and bituminous mixtures for highway engineering. JTG E20-2011. Beijing: China Communications Press.
- Mohan, D., Pittman, C. U., & Steele, P. H. (2006). Pyrolysis of wood/biomass for bio-oil: A critical review. Energy & Fuels, 20(3), 848–889. doi: https://doi.org/10.1021/ef0502397
- Mousavi, M., Pahlavan, F., Oldham, D., Hosseinnezhad, S., & Fini, E. H. (2016). Multiscale investigation of oxidative aging in biomodified asphalt binder. The Journal of Physical Chemistry C, 120(31), 17224–17233. doi: https://doi.org/10.1021/acs.jpcc.6b05004
- Mullen, C. A., & Boateng, A. A. (2008). Chemical composition of bio-oils produced by fast pyrolysis of two energy crops. Energy & Fuels, 22(3), 2104–2109. doi: https://doi.org/10.1021/ef700776w
- Obruca, S., Benesova, P., Kucera, D., Petrik, S., & Marova, I. (2015). Biotechnological conversion of spent coffee grounds into polyhydroxyalkanoates and carotenoids. New Biotechnology, 32(6), 569–574. doi: https://doi.org/10.1016/j.nbt.2015.02.008
- Podolsky, J. H., Buss, A., Williams, R. C., Hernández, N., & Cochran, E. W. (2016). Effects of aging on rejuvenated vacuum tower bottom rheology through use of black diagrams, and master curves. Fuel, 185, 34–44. doi: https://doi.org/10.1016/j.fuel.2016.07.094
- Rocha, E. P. A., Gomes, F. J. B., Sermyagina, E., Cardoso, M., & Colodette, J. L. (2015). Analysis of Brazilian biomass focusing on thermochemical conversion for energy production. Energy & Fuels, 29(12), 7975–7984. doi: https://doi.org/10.1021/acs.energyfuels.5b01945
- Sun, D., Sun, G., Du, Y., Zhu, X., Lu, T., Pang, Q., … Dai, Z. (2017). Evaluation of optimized bio-asphalt containing high content waste cooking oil residues. Fuel, 202, 529–540. doi: https://doi.org/10.1016/j.fuel.2017.04.069
- Sun, Z., Yi, J., Huang, Y., Feng, D., & Guo, C. (2016). Investigation of the potential application of biodiesel by-product as asphalt modifier. Road Materials and Pavement Design, 17(3), 737–752. doi: https://doi.org/10.1080/14680629.2015.1096819
- Uzun, B. B., Apaydin-Varol, E., Ateş, F., Özbay, N., & Pütün, A. E. (2010). Synthetic fuel production from tea waste: Characterisation of bio-oil and bio-char. Fuel, 89(1), 176–184. doi: https://doi.org/10.1016/j.fuel.2009.08.040
- Wen, H., Bhusal, S., & Wen, B. (2013). Laboratory evaluation of waste cooking oil-based bioasphalt as an alternative binder for hot mix asphalt. Journal of Materials in Civil Engineering, 25(10), 1432–1437. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000713
- Wu, S., Qiu, J., Mo, L., Yu, J., Zhang, Y., & Li, B. (2007). Investigation of temperature characteristics of recycled hot mix asphalt mixtures. Resources, Conservation and Recycling, 51(3), 610–620. doi: https://doi.org/10.1016/j.resconrec.2006.11.005
- Yang, X., Mills-Beale, J., & You, Z. (2017). Chemical characterization and oxidative aging of bio-asphalt and its compatibility with petroleum asphalt. Journal of Cleaner Production, 142, 1837–1847. doi: https://doi.org/10.1016/j.jclepro.2016.11.100
- Yang, S., & Suciptan, T. (2016). Rheological behavior of Japanese cedar-based biobinder as partial replacement for bituminous binder. Construction and Building Materials, 114, 127–133. doi: https://doi.org/10.1016/j.conbuildmat.2016.03.100
- Yang, X., You, Z., Dai, Q., & Mills-Beale, J. (2014). Mechanical performance of asphalt mixtures modified by bio-oils derived from waste wood resources. Construction and Building Materials, 51, 424–431. doi: https://doi.org/10.1016/j.conbuildmat.2013.11.017
- Yang, X., You, Z., & Mills-Beale, J. (2015). Asphalt binders blended with a high percentage of biobinders: Aging mechanism using FTIR and rheology. Journal of Materials in Civil Engineering, 27(4), 04014157. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0001117
- You, Z., Mills-Beale, J., Fini, E., Goh, S. W., & Colbert, B. (2011). Evaluation of low-temperature binder properties of warm-mix asphalt, extracted and recovered RAP and RAS, and Bioasphalt. Journal of Materials in Civil Engineering, 23(11), 1569–1574. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000295
- Zhang, L., Bahia, H., & Tan, Y. (2015). Effect of bio-based and refined waste oil modifiers on low temperature performance of asphalt binders. Construction and Building Materials, 86, 95–100. doi: https://doi.org/10.1016/j.conbuildmat.2015.03.106
- Zhang, D., Chen, M., Wu, S., Liu, J., & Amirkhanian, S. (2017). Analysis of the relationships between waste cooking oil qualities and rejuvenated asphalt properties. Materials, 10(5), 508. doi: https://doi.org/10.3390/ma10050508
- Zhang, R., Wang, H., Jiang, X., You, Z., Yang, X., & Ye, M. (2018). Thermal storage stability of bio-oil modified asphalt. Journal of Materials in Civil Engineering, 30(4), 1–9.