References
- AASHTO T321-14. (2014). Standard method of test for determining the fatigue life of compacted asphalt mixtures subjected to repeated flexural bending. American Association of State Highway and Transportation officials.
- Akbari, A., & Modarres, A. (2017). Effect of clay and lime nano-additives on the freeze–thaw durability of hot mix asphalt. Road Materials and Pavement Design, 18(3), 646–669. doi: https://doi.org/10.1080/14680629.2016.1182939
- Ali, S., IsmaiI, A., Karim, M., Yusoff, N., Al-Mansab, R., & Aburkaba, E. (2017). Performance evaluation of Al2O3 nanoparticle-modified asphalt binder. Road Materials and Pavement Design, 18(6), 1251–1268. doi: https://doi.org/10.1080/14680629.2016.1208621
- Ameri, M., Seif, A., Abbasi, M., Molayem, M., & Khavandi khiavi, A. (2017). Fatigue performance evaluation of modified asphalt binder using of dissipated energy approach. Construction and Building Materials, 136, 184–191. doi: https://doi.org/10.1016/j.conbuildmat.2017.01.010
- Azarhoosh, A. R., Moghadas Nejad, F., & Khodaii, A. (2016). Using the surface free energy method to evaluate the effects of nanomaterial on the fatigue life of hot mix asphalt. Journal of Materials in Civil Engineering, 28(10), 1–9. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0001614
- Azarhoosh, A. R., Moghadas Nejad, F., & Khodaii, A. (2017). The influence of cohesion and adhesion parameters on the fatigue life of hot mix asphalt. The Journal of Adhesion, 93(13), 1048–1067. doi: https://doi.org/10.1080/00218464.2016.1201656
- Babadopulos, L. F. A. L., Soares, J. B., Ferreira, J. L. S., & do Nascimento, L. A. H. (2018). Fatigue cracking simulation of aged asphalt pavements using a viscoelastic continuum damage model. Road Materials and Pavement Design, 19(3), 546–560. doi: https://doi.org/10.1080/14680629.2018.1418715
- Bhasin, A. (2007). Development of methods to quantify bitumen aggregate adhesion and loss of adhesion due to water (PhD. thesis). Texas A&M Univ., College Station, TX.
- Carpenter, S. H., & Shen, S. (2006). Dissipated energy approach to study hot-mix asphalt healing in fatigue. Journal of the Transportation Research Board, 1970, 178–185. doi: https://doi.org/10.1177/0361198106197000119
- Cheng, D., Little, D., Lytton, R., & Holste, J. (2002). Surface energy measurement of asphalt and its application to predicting fatigue and healing in asphalt mixtures. Transportation Research Record: Journal of the Transportation Research Board, 1810.
- Cong, L., Peng, J., Guo, Z., & Wang, Q. (2017). Evaluation of fatigue cracking in asphalt mixtures based on surface energy. Journal of Materials in Civil Engineering, 29(3), D4015003. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0001465
- Fang, C., Yu, R., Liu, S., & Li, Y. (2013). Nanomaterials applied in asphalt modification: A review. Journal of Materials Science & Technology, 29(7), 589–594. doi: https://doi.org/10.1016/j.jmst.2013.04.008
- Ghuzlan, K. A. (2001). Fatigue damage analysis in asphalt concrete mixtures based upon dissipated energy concepts (PhD. thesis). University of Illinois at Urbana Champaign, USA.
- Ghuzlan, K. A., & Carpenter, S. H. (2000). An energy-derived/damage-based failure criteria for fatigue testing. TRB Annual Meeting, Washington, DC, USA.
- Hamedi, G. H., & Moghadas Nejad, F. (2015). Using energy parameters based on the surface free energy concept to evaluate the moisture susceptibility of hot mix asphalt. Road Materials and Pavement Design, 16(2), 239–255. doi: https://doi.org/10.1080/14680629.2014.990049
- Hart, L. D. (1990). Alumina chemicals: Science and technology handbook. Columbus, OH: American Ceramic Society.
- Jahromi, S. G., & Khodaei, A. (2009). Comparing factors affecting resilient modulus in asphalt mixtures. Scientia Iranica, 16(5), 367–375.
- Jasso, M., Bakos, D., Stastna, J., & Zanzotto, L. (2012). Conventional asphalt modified by physical mixtures of linear SBS and montmorillonite. Applied Clay Science, 70, 37–44. doi: https://doi.org/10.1016/j.clay.2012.09.004
- Khavandi Khiavi, A., & Ameri, M. (2013). Laboratory evaluation of strain controlled fatigue criteria in hot mix asphalt. Construction and Building Materials, 47, 1497–1502. doi: https://doi.org/10.1016/j.conbuildmat.2013.06.062
- Liu, G., Wu, S., van de Ven, M., Molenaar, A., & Besamusca, J. 2010. Characterization of organic surfactant on montmorillonite nanoclay to be used in bitumen. Journal of Materials in Civil Engineering, 22(8), 794–799. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000013
- Masad, E., Castelo Branco, V., Little, D., & Lytton, R. (2006). An improved method for the dynamic mechanical analysis of fatigue failure of sand asphalt mixtures. Rep. FHWA/473630, Federal Highway Administration, Texas Transportation Institute, Texas A & M Univ., TX.
- Mirhosseini, A. F., Kavussi, A., Jalal Kamali, M. H., Khabiri, M., & Hassani, A. (2017). Evaluating fatigue behavior of asphalt binders and mixes containing Date Seed Ash. Journal of Civil Engineering and Management, 23(8), 1164–1175. doi: https://doi.org/10.3846/13923730.2017.1396560
- Mo, L., Huurman, M., Wu, S., & Molenaar, A. A. A. (2009). Raveling investigation of porous asphalt concrete based on fatigue characteristics of bitumen-stone adhesion and mortar. Materials and Design, 30(1), 170–179. doi: https://doi.org/10.1016/j.matdes.2008.04.031
- Modarres, A., & Aloogar, A. (2015). Comparison between the fatigue response of hot and warm mix asphalts based on the dissipated energy approach. International Journal of Pavement Engineering, 18(1), 60–72. doi: https://doi.org/10.1080/10298436.2015.1053481
- Moghadas Nejad, F., Notash, M., & Forough, S. A. (2015). Evaluation of healing potential in unmodified and SBS-modified asphalt mixtures using a dissipated-energy approach. Journal of Materials in Civil Engineering, 27(12), 1–8.
- Moghadas Nejada, F., Tanzadeh, R., Tanzadeh, J., & Hamedi, G. H. (2016). Investigating the effect of nanoparticles on the rutting behaviour of hot-mix asphalt. International Journal of Pavement Engineering, 17(4), 353–362. doi: https://doi.org/10.1080/10298436.2014.993194
- Mubaraki, M., Ali, S., IsmaiI, A., & Yusoff, N. (2016). Rheological evaluation of asphalt cements modified With ASA Polymer and Al2O3 nanoparticles. The 3rd International Conference on Transportation Geotechnics, Guimarães, Portugal.
- Peltonen, P. V. (1992). Road aggregate choice based on silicate quality and bitumen adhesion. Journal of Transportation Engineering, 118(1), 50. doi: https://doi.org/10.1061/(ASCE)0733-947X(1992)118:1(50)
- Piriyawong, V., Thongpoo, V., Asanithi, P., & Limsuwan, P. (2012). Preparation and characterization of alumina nanoparticles in deionizedwater using laser ablation technique. Journal of Nanomaterials, 2012, Article ID 819403, 6 pages.
- Rooholamini, H., Imaninasab, R., & Vamegh, V. (2017). Experimental analysis of the influence of SBS/nanoclay addition on asphalt fatigue and thermal performance. International Journal of Pavement Engineering, 13(2), 1–10. doi: https://doi.org/10.1080/10298436.2017.1321414
- Saha, G., & Biligiri, K. P. (2018). Comprehensive fatigue mechanism of asphalt mixtures: Synergistic study of crack initiation and propagation. Journal of Materials in Civil Engineering, 30(3), 04018024. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0002185
- Santagata, E., Baglieri, O., Tsantili, L., & Chiappine, G. (2015b). Fatigue properties of bituminous binders reinforced with carbon nanotubes. International Journal of Pavement Engineering, 16(1), 80–90. doi: https://doi.org/10.1080/10298436.2014.923099
- Santagata, E., Baglieri, O., Tsantilis, L., & Chiappinelli, G. (2015a). Fatigue and healing properties of nano-reinforced bituminous binders. International Journal of Fatigue, 80(1), 30–39. doi: https://doi.org/10.1016/j.ijfatigue.2015.05.008
- Sarsam, S. I. (2016). Influence of nano material additives on dissipated energy through the fatigue process of asphalt concrete. International Journal of Chemical Engineering and Analytical Science, 1(1), 53–59.
- Shafabakhsh, G. A., & Kordi, Z. (2017). Evaluating mechanical properties of stone mastic asphalt modified with nano Fe2O3. Construction and Building Materials, 93(134), 530–539.
- Shen, S., Airey, G. D., & Carpenter, S. H. (2006). A dissipated energy approach to fatigue evaluation. Road Materials and Pavement Design, 7(1), 47–69. doi: https://doi.org/10.1080/14680629.2006.9690026
- Shen, S., & Carpenter, S. H. (2007). Dissipated energy concepts for HMA performance: fatigue and healing, Report No. 29, university of Illinois at Urbana-Champaign, USA: Federal Aviation Administration.
- Souliman, M. (2012). Integrated predictive model for healing and fatigue endurance limit for asphalt concreted (PhD. thesis). Arizona State University, USA.
- Stroeve, P., & Ke, C. (2005). Polymer–LayeredSilicate and silica nanocomposites. Amsterdam: Elsevier Science Publishers.
- Tabatabaee, N., & Shafiee, M. H. (2012). Effect of organoclay modified binders on fatigue performance. 7th RILEM International Conference on cracking in pavements, Delft, the Netherlands, 869–878.
- Van Oss, C. J., Chaudhury, M. K., & Good, R. J. (1988). Interfacial Lifshitz–van der Waals and polar interactions in macroscopic systems. Chemical Reviews, 88(6), 927–941. doi: https://doi.org/10.1021/cr00088a006
- Wang, C., Zhang, H., Castorena, C., Zhang, J., & Kim, Y. R. (2016). Identifying fatigue failure in asphalt binder time sweep tests. Construction and Building Materials, 121, 2016.
- Wasiuddin, N. M. (2007). Effect of additives on surface free energy characteristics of aggregates and binders in hot mix asphalt (PhD thesis). University of Oklahama, USA.
- Xiao, F., Amirkhanian, S., & Juang, C. H. (2009). Prediction of fatigue life of rubberized asphalt concrete mixtures containing reclaimed asphalt pavement using artificial neural networks. Journal of Materials in Civil Engineering, 21(6), 253–261. doi: https://doi.org/10.1061/(ASCE)0899-1561(2009)21:6(253)
- Zani, L., Giustozzi, F., & Harvey, J. (2017). Effect of storage stability on chemical and rheological properties of polymer-modified asphalt binders for road pavement construction. Construction and Building Materials, 145, 326–335. doi: https://doi.org/10.1016/j.conbuildmat.2017.04.014
- Zou, X., Aimin, S., Ding, B., Tan, Y., & Huang, X. (2017). Evaluation and analysis of variance of storage stability of asphalt binder modified by nanotitanium dioxide. Advances in Materials Science and Engineering, 2017, Article ID 6319697, 12 pages. doi: https://doi.org/10.1155/2017/6319697