Asphalt-rubber interaction and performance evaluation of rubberised asphalt binders containing non-foaming warm-mix additives

References

• Abdelrahman, M. (2006). Controlling performance of crumb rubber-modified binders through addition of polymer modifiers. Transportation Research Record: Journal of the Transportation Research Board, 1962, 64–70.
   Google Scholar
• Abdelrahman, M. A., & Carpenter, S. H. (1999). Mechanism of the interaction of asphalt cement with crumb rubber modifier. Transportation Research Record: Journal of the Transportation Research Board, 1661, 106–113. doi: https://doi.org/10.3141/1661-15
   Google Scholar
• Airey, G., Rahman, M., & Collop, A. C. (2011). Crumb rubber and Bitumen interaction as a function of crude source and Bitumen viscosity. Road Materials and Pavement Design, 5(4), 453–475. doi: https://doi.org/10.1080/14680629.2004.9689981
   Google Scholar
• Akisetty, C. K., Lee, S. J., & Amirkhanian, S. N. (2010). Laboratory investigation of the influence of warm asphalt additives on long-term performance properties of CRM binders. International Journal of Pavement Engineering, 11(2), 153–160. doi: https://doi.org/10.1080/10298430903197225
   Web of Science ®Google Scholar
• Artamendi, I., & Khalid, H. A. (2006). Diffusion kinetics of bitumen into waste tyre rubber. Journal of the Association of Asphalt Paving Technologists, 75, 133–164.
   Google Scholar
• Bahia, H. U., Hanson, D. I., Zeng, M., Zhai, H., Khatri, M. A., & Anderson, R. M. (2001). Characterization of modified asphalt binders in superpave mix design. Washington, DC: Transportation Research Board. Retrieved from NCHRP Report 459.
   Google Scholar
• Buckley, D. J., & Berger, M. (1962). The swelling of polymer systems in solvents. II. Mathematics of diffusion. Journal of Polymer Science, 56(163), 175–188. doi: https://doi.org/10.1002/pol.1962.1205616315
   Google Scholar
• California DOT. (2005). Feasibility of recycling rubber-modified paving materials. California: State of California Department of Transportation.
   Google Scholar
• D’Angelo, J. (2008). Warm-mix asphalt: European Practice. Washington, DC: Federal Highway Administration.
   Google Scholar
• D'Angelo, J., & Dongré, R. (2009). Practical use of multiple stress creep and recovery test. Transportation Research Record: Journal of the Transportation Research Board, 2126, 73–82. doi: https://doi.org/10.3141/2126-09
   Web of Science ®Google Scholar
• Divya, P. S., Gideon, C. S., & Krishnan, J. M. (2013). Influence of the type of binder and crumb rubber on the creep and recovery of crumb rubber modified bitumen. Journal of Materials in Civil Engineering, 25(4), 438–449. doi: https://doi.org/10.1061/(Asce)Mt.1943-5533.0000608
   Web of Science ®Google Scholar
• EEA. (2017). Greenhouse gas emissions from transport. Denmark: European Environment Agency.
   Google Scholar
• ETRMA. (2016). End-of-life tyre report 2015. Brussels.
   Google Scholar
• Farrar, M., Sui, C., Salmans, S., & Qin, Q. (2015). Determining the low-temperature rheological properties of asphalt binder using a dynamic shear rheometer (DSR). Laramie, WY. Retrieved from Fundamental Properties of Asphalts and Modified Asphalts III Product: FP 08.
   Google Scholar
• FHWA. (2017). Four-mm dynamic shear rheometry. VA. Retrieved from TechBrief.
   Google Scholar
• Ghavibazoo, A., & Abdelrahman, M. (2014). Effect of crumb rubber dissolution on low-temperature performance and aging of asphalt-rubber binder. Transportation Research Record: Journal of the Transportation Research Board, 2445, 47–55. doi: https://doi.org/10.3141/2445-06
   Web of Science ®Google Scholar
• Ghavibazoo, A., Abdelrahman, M., & Ragab, M. (2013). Mechanism of crumb rubber modifier dissolution into asphalt matrix and its effect on final physical properties of crumb rubber-modified binder. Transportation Research Record: Journal of the Transportation Research Board, 2370, 92–101. doi:10.3141/2370-12.
   Web of Science ®Google Scholar
• Hanz, A. J. (2012). Quantifying the impacts of warm mix asphalt on constructability and performance. (Doctor of Philosophy), University of Wisconsin – Madison, Madison.
   Google Scholar
• Hintz, C., & Bahia, H. (2013). Simplification of linear amplitude sweep test and specification parameter. Transportation Research Record: Journal of the Transportation Research Board, 2370, 10–16. doi: https://doi.org/10.3141/2370-02
   Web of Science ®Google Scholar
• Hintz, C., Velasquez, R., Johnson, C., & Bahia, H. (2011). Modification and Validation of linear amplitude sweep test for binder fatigue specification. Transportation Research Record: Journal of the Transportation Research Board, 2207, 99–106. doi: https://doi.org/10.3141/2207-13
   Web of Science ®Google Scholar
• Huang, S. C. (2008). Rubber concentrations on rheology of aged asphalt binders. Journal of Materials in Civil Engineering, 20(3), 221–229. doi: https://doi.org/10.1061/(Asce)0899-1561(2008)20:3(221)
   Web of Science ®Google Scholar
• Lo Presti, D. (2013). Recycled tyre rubber modified bitumens for road asphalt mixtures: A literature review. Construction and Building Materials, 49, 863–881. doi: https://doi.org/10.1016/j.conbuildmat.2013.09.007
   Web of Science ®Google Scholar
• Malusky, J. J. (2016). Evaluation of laboratory performance in MSCR testing (T350/D7405) using AMRL PSP data. Retrieved from http://www.asphaltetgs.org/
   Google Scholar
• Marasteanu, M. O., & Cannone Falchetto, A. (2018). Review of experimental characterisation and modelling of asphalt binders at low temperature. International Journal of Pavement Engineering, 19(3), 279–291. doi: https://doi.org/10.1080/10298436.2017.1347436
   Web of Science ®Google Scholar
• Masad, E. A., Huang, C.-W., DAngelo, J., & Little, D. N. (2009). Characterization of asphalt binder resistance to permanent deformation based on nonlinear viscoelastic analysis of multiple stress creep recovery (MSCR) test. Journal of the Association of Asphalt Paving Technologists, 78, 535–566.
   Google Scholar
• Maupin Jr., G. W. (1996). Hot mix asphalt rubber applications in Virginia. Transportation Research Record: Journal of the Transportation Research Board, 1530, 18–24. doi: https://doi.org/10.1177/0361198196153000103
   Google Scholar
• Mikhailenko, P., Kadhim, H., & Baaj, H. (2017). Observation of bitumen microstructure oxidation and blending with ESEM. Road Materials and Pavement Design, 18(sup2), 216–225. doi: https://doi.org/10.1080/14680629.2017.1304251
   Web of Science ®Google Scholar
• National Asphalt Pavement Association. (2008). Warm mix asphalt: Contractors’ experiences. Lanham, MD: National Asphalt Pavement Association.
   Google Scholar
• Pasquini, E., Canestrari, F., Cardone, F., & Santagata, F. A. (2011). Performance evaluation of gap graded asphalt rubber mixtures. Construction and Building Materials, 25(4), 2014–2022. doi: https://doi.org/10.1016/j.conbuildmat.2010.11.048
   Web of Science ®Google Scholar
• Ragab, M., & Abdelrahman, M. (2014). Effects of interaction conditions on internal network structure of crumb rubber-modified asphalts. Transportation Research Record: Journal of the Transportation Research Board, 2444, 130–141. doi: https://doi.org/10.3141/2444-15
   Google Scholar
• Rubio, M. C., Martínez, G., Baena, L., & Moreno, F. (2012). Warm mix asphalt: An overview. Journal of Cleaner Production, 24, 76–84. doi: https://doi.org/10.1016/j.jclepro.2011.11.053
   Web of Science ®Google Scholar
• Rymer, B., & Donavan, P. (2005). Tire-pavement noise intensity testing in Europe: The NITE study and its relationship to ongoing Caltrans quiet pavement activities. Journal of the Association of Asphalt Paving Technologists, 74, 1107–1160.
   Google Scholar
• Safaei, F., & Castorena, C. (2016). Temperature effects of linear amplitude sweep testing and analysis. Transportation Research Record: Journal of the Transportation Research Board, 2574, 92–100. doi: https://doi.org/10.3141/2574-10
   Web of Science ®Google Scholar
• Shen, J., & Amirkhanian, S. (2007). The influence of crumb rubber modifier (CRM) microstructures on the high temperature properties of CRM binders. International Journal of Pavement Engineering, 6(4), 265–271. doi: https://doi.org/10.1080/10298430500373336
   Google Scholar
• Shu, X., & Huang, B. S. (2014). Recycling of waste tire rubber in asphalt and Portland cement concrete: An overview. Construction and Building Materials, 67, 217–224. doi: https://doi.org/10.1016/j.conbuildmat.2013.11.027
   Web of Science ®Google Scholar
• Stempihar, J., Gundla, A., & Underwood, B. S. (2018). Interpreting stress sensitivity in the multiple stress creep and recovery test. Journal of Materials in Civil Engineering, 30(2), doi: https://doi.org/10.1061/(asce)mt.1943-5533.0002153
   Google Scholar
• Sui, C., Farrar, M., Harnsberger, P., Tuminello, W., & Turner, T. (2011). New low-temperature performance-grading method. Transportation Research Record: Journal of the Transportation Research Board, 2207, 43–48. doi: https://doi.org/10.3141/2207-06
   Web of Science ®Google Scholar
• Wang, H., Liu, X., Apostolidis, P., & Scarpas, T. (2018a). Non-Newtonian behaviors of crumb rubber-modified bituminous binders. Applied Sciences, 8(10), 1760. doi: https://doi.org/10.3390/app8101760
   Google Scholar
• Wang, H., Liu, X., Apostolidis, P., & Scarpas, T. (2018b). Review of warm mix rubberized asphalt concrete: Towards a sustainable paving technology. Journal of Cleaner Production, 177, 302–314. doi: https://doi.org/10.1016/j.jclepro.2017.12.245
   Web of Science ®Google Scholar
• Wang, H., Liu, X., Apostolidis, P., & Scarpas, T. (2018c). Rheological Behavior and its chemical interpretation of crumb rubber modified asphalt containing warm-mix additives. Transportation Research Record: Journal of the Transportation Research Board, doi: https://doi.org/10.1177/0361198118781376
   Google Scholar
• Yu, B., Jiao, L., Ni, F., & Yang, J. (2014). Evaluation of plastic–rubber asphalt: Engineering property and environmental concern. Construction and Building Materials, 71, 416–424. doi: https://doi.org/10.1016/j.conbuildmat.2014.08.075
   Web of Science ®Google Scholar
• Yu, H., Leng, Z., Xiao, F., & Gao, Z. (2016). Rheological and chemical characteristics of rubberized binders with non-foaming warm mix additives. Construction and Building Materials, 111, 671–678. doi: https://doi.org/10.1016/j.conbuildmat.2016.02.066
   Web of Science ®Google Scholar